美國新規METONE HHPC6+粒子計數器
HHPC6+ 面議污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
北京中邦興業科技有限公司
會員1.png)
北京中邦興業科技有限公司
| 參 考 價 | 面議 |
產品型號TDA-6D氣溶膠發生器
品 牌
廠商性質經銷商
所 在 地北京市
聯系方式：王德龍查看聯系方式
更新時間：2017-07-08 17:24:59瀏覽次數：1667次
聯系我時，請告知來自 環保在線美國ATI TDA-6D氣溶膠發生器是TDA-6C的升級版本
ATI 6D Aerosol Generator
Printable Specification Sheet
A tough, portable solution
The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator. It is ideal for testing a wide variety of filter systems with airflows up to 2,000 cfm by generating a poly-dispersed, sub-micron aerosol. Applications include workstations, negative-pressure filtration units, biological safety cabinets, ceiling modules, and more.
The 6D can also be used for testing positive pressure systems using an optional hose adapter. On-site routine maintenance is easy. And its integrated compressor makes implementation simple - all you need is a power source.
Performance Guaranteed
6D aerosol output is regulated with a standard issue calibrated pressure gauge; guaranteeing 20psi across the nozzle as specified in industry standards. The 6D complies with all applicable electrical and safety requirements and is supplied standard with the CE mark.
Easy to use
Integrated liquid fill sight glass, drain port, and power cord storage make operating, transporting, and storing the 6D simple and easy.
Optional Hose Adaptor Kit
A hose adaptor kit, used to introduce aerosol remoy, connects easily to the standard outlet using the sanitary flange or simple NPT connection.
Product specifications:
AEROSOL OUTPUT RANGE: 50 - 2,000 cfm
AEROSOL CONCENTRATION: 100 ug/l @ 200 cfm / 10 ug/l @ 2,000 cfm
GENERATOR TYPE: 2 or 6 Laskin Nozzle Jets （1/2 or 1-1/2 Nozzles）
AEROSOL TYPE: Poly-dispersed （Cold）
SIZE:14-1/2” L × 10” W × 9” H （37cm L × 26cm W × 23cm H）
WEIGHT: 34lbs （15kg）
ELECTRICAL: 110VAC/60 Hz or 220VAC/50Hz
COMPRESSED AIR:Not Required, On-Board, Integral Compressor
STANDARDS COMPLIANCE:
Filtration Industry: NSF 49, IEST, ISO-14644
Electrical. & Safety: CE, FCC, EN61010-1:2010, EN61326-1:2006
Aerosol output calculation
The 6D includes a total of 1-1/2 Laskin nozzles. Each "full" nozzle consists of four jets located at the nozzle tip, for a total of six jets. The aerosol concentration depends on the compressed air pressure and flow available for consumption by the nozzle. With 20 psig applied, each jet emits 18.75 slpm of air containing 1,275 ug/l of aerosol. When this aerosol is diluted with 135 cfm of air, the aerosol concentration becomes approximay 25 micrograms per liter. The equation below is for purposes of calculating the aerosol output in micrograms per liter （ug/l） when 20 psig is applied to the nozzle jets.
3,375 x （# of jets being used） divided by the total airflow （CFM）
NOTE: If more than 20 psig is used, the output concentration will increase and, conversely, if less than 20 psig is used, the output concentration will decrease.
Applications
· Clean Rooms
· Laminar Flow Benches
· Biosafety Cabinets
· Glove Boxes
· HEPA Vacuum Cleaners
· HVAC Systems
· HEPA Filters
· ULPA Filters
· Negative Pressure Filtration Units
· Surgical Suites
· Nuclear Filter Banks
· Collective Protection Filters
· Research and Development
Industries
· Pharmaceutical
· Food Processing
· Veterinary Medicine
· Laboratories
· Asbestos Abatement
· Heavy Metal Processors
· Nuclear Power and Fuel
· Hospitals
· Chemical Processing
· Certifiers
· NBC Defense Agencies
· Governmental Labs
· Filter Manufacturers
· Micro Electronic
· Electronic
· Biotechnology
· Micromechanics
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
