污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
四川川大干燥科技工程有限責任公司
四川川大干燥科技工程有限責任公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式：查看聯系方式
更新時間：2022-12-04 14:50:21瀏覽次數：227次
聯系我時，請告知來自 環保在線槽型強制攪拌混料機Groove-type Forced Stirring Mixer槽型混合機
一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application
CH槽型強制攪拌混料機系采用U型容器中心設S形精致強制攪拌器來強化要混合物料之間的混合強度，從而達到高效、適用、均勻混合之目的。CH型混合機廣泛用于混合粉狀或濕性物料，使不同比例主輔料混合均勻。廣泛適用于制藥、化工、食品等行業。
For the CH groove-type forced stirring mixer, the U-shaped container is set with S-shaped forced stirrer in the middle to strengthen the mixture strength of materials to be mixed, thus to reach the high efficiency, and applicable and uniform mixing. CH mixer is widely applied in the mixing of powder or wet materials to uniformly mix main and auxiliary materials at different proportions, and applicable for pharmacy, chemical and food industries.
二、特點Characteristics
1. 本機與物料接觸處均采用不銹鋼制造，漿葉與桶身間隙小，混合，攪拌軸兩端設有密封裝置，能防止物料外泄。
2. 攪拌混料軸為通軸設計，保證攪拌與倒料的同軸性與可靠性，同時攪拌槳葉為整厚板材精加工的S形結構，確?；炝暇鶆?、耐用。
3. 料斗采用點動控制，出料方便。
1. Parting contacting with the materials are made from stainless steel; there is little gap between the blade and cylinder and no dead angle for mixing; both ends of the stirring shaft are set with sealing devices to prevent the material leakage.
2. The stirring mixing shaft is designed as a through shaft to ensure the coaxality and reliability of stirring and dumping; the stirring blades are in S-shaped structures manufactured by whole thick plates to ensure the mixing uniformity and durable property.
3. The hopper is under the point control, resulting in convenient discharge.
三、技術參數（下表中數值僅供選型時參考）
Technical parameters (the values in the table below are for reference in type selection only)
四、外形簡圖Dimension sketch
槽型混合機
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
