污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
珠?？祵毴R儀表有限公司
會員1.png)
珠?？祵毴R儀表有限公司
| 參 考 價 | 面議 |
產品型號91-HF
品 牌
廠商性質其他
所 在 地
聯系方式：查看聯系方式
更新時間：2023-08-15 12:26:41瀏覽次數：347次
聯系我時，請告知來自 環保在線Stable output and repeatability - provides constant control under variable flow rates and supply pressures. Corrosion-resistant construction - aluminum die-castings are finished with Irridite an
Features & Benefits
Stable output and repeatability - provides constant control under variable flow rates and supply pressures.
Corrosion-resistant construction - aluminum die-castings are finished with Irridite and baked epoxy paint.
Depth filter -unit comes equipped with high capacity 3 micron filter housed in drip-well
Self-Relieving
Low droop at high flow levels - aspirator design helps maintain set pressure at higher flow levels
Tight shut-off - a soft, rubberized valve provides a positive shut-off and compensates for dirt and other foreign matter
Description
The Model 91-HF Filter-Regulator is designed to provide clean, accurate air pressure to valve positioners, and other
pneumatic control equipment. The filter regulator has been proven to provide long lasting corrosion resistance in harsh
industrial environments. The model 91-HF filter regulator is a quality unit that is ideal as an economical alternative for
control of process applications.
The Model 91-HF is used extensively to supply air to pneumatic controllers, transmitters, transducers, valve
positioners, air cylinders, and a wide range of pneumatic control systems.
Specifications
Performance Specifications
Output Range：0-120 psig (0-800 kPa)
Maximum Supply Pressure：150 psig (1034 kPa)
Flow Capacity：22 SCFM (37.0 m3/hr) at 100 psig (700 kPa)
Exhaust Capacity：0.1 SCFM (0.17 m3/hr) with downstream pressure 5 psig (35 kPa) above set point
Sensitivity：1” (2.5 cm) of water
Air Consumption：Less than 5 SCFM (0.17 m3/hr)
Effect of Supply Pressure Variation：Less than 0.2 psig (1.4 kPa) for 25 psi (170 kPa) change
Ambient Temperature Limits：0 to 160°F (-18 to 71°C)
Mechanical Specifications
Mounting：Pipe or through body
Weight：1.6 lb (725 g)
Port Size：(In, Out, and Gauge) 1/4” NPT
Materials of Construction：Body: Die-cast aluminum alloy, Irridite and baked Epoxy finish
Filter: 3 micron Phenolic impregnated Cellulose
Diaphragm: Nitrile Elastomer and Nylon fabric
Valve Seat Plug: Nitrile Elastomer
Additional Materials: Brass, Zinc plated steel, Acetal
Mounting Dimensions
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
