激情综合啪啪6月丁香,久久久久国产精品91福利,99精品日韩欧美在线观看,91成人午夜福利在线观看国产

行業產品

  • 行業產品

珠海康寶萊儀表有限公司


MPI-520多功能儀表電氣裝置

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號MPI-520

品       牌

廠商性質其他

所  在  地

聯系方式：查看聯系方式

更新時間：2022-12-20 13:43:54瀏覽次數：1235次

聯系我時，請告知來自 環保在線

產品簡介

The MPI-520 multifunction meter is dedicated to perform diagnosis of electrical installation according to IEC 61557 standards. Digital meter MPI-520 is designed to measure impedance of a short cicuit

詳細介紹

The MPI-520 multifunction meter is dedicated to perform diagnosis of electrical installation according to IEC 61557 standards. Digital meter MPI-520 is designed to measure impedance of a short cicuit loop also without triggering RCD, parameters
of RCD, insulation resistance, earthing resistance, continuity and also for phase sequence testing. Furthermore to measure and logging of AC voltage and current, frequency and power.
Wide range of standard accessories enable to perform all necessary measurements and safety test. Highly professional portable multifunction meter with memory of measured parameters.
MPI-520 Technical Specifications
 

Possible measurements

  • Short-circuit loop measurement:
    - impedance measurement with 23A current (44A phase-to-phase) - short-circuit resistor  R=10Ω,
    - measurement range: 95...440V, frequency 45...65Hz,
     
  • Short-circuit loop measurement with resolution 0,01Ω, in distribution network without tiggering RCD (IΔn≥30mA):
    - automatic  calculation of short-circuit, detection of phase voltage and phase-to-phase voltage,
    - additional UNI-Schuko plug for automatic measurement, AGT adapter for 3 phase network measurement.
     
  • Testing of general and selective RCD with the rated differential current of 10,30,100,300,500 and 1000mA. (Type AC, A and B).
     
  • Measurement of insulation resistance:
    - with test voltage 250V, 500V, 1000V,
    - measurement range up to 3GΩ,
    - UNI-Schuko plug for insulation measurement,
    - automatic discharging after measurement,
    - automatic measurement of all resistences in 3,4,5-wire cables using optional adapter AUTO-ISO,
    - acoustic signals in 5sec intervals for insulation resistance characteristic,
    - safety measurement - protection against overvoltage.
     
  • Measurement of earthing resistance.
     
  • Bi-directional testing of PE wire continuity using 200mA current.
    -  Autocalibration of test leads.
     
  • Phase sequence testing.
     
  • Memory is divided into 10 memory banks each of them containing 99 memory cells.
     
  • Battery charge indicator.
  • AUTO-OFF function.
  • USB interface.
     

Short-circuit loop impedance measurement ZL-PE, ZL-N, ZL-L
Measurement using 23/40A current measurement range in accordance with IEC 61557: 0,13...1999,9Ω
(for 1,2m lead ):

Range Resolution Accuracy
0,00...19,99Ω 0,01Ω ±(5% m.v. + 3 dgt)
20,0...199,9Ω 0,1Ω
200...1999Ω 1Ω

rated voltage: 95...270V (for ZL-PE i ZL-N) and 95...440V (for ZL-L)
frequency: 45...65Hz

Short-circuit loop impedance measurement ZL-PERCD        
Measurement using 15mA current measurement range in accordance with
IEC 61557: 0,50...1999,9Ω

Range Resolution Accuracy
0,00...19,99Ω 0,01Ω ±(6% m.v. + 10 dgt)
20,0...199,9Ω 0,1Ω ±(6% m.v. + 5 dgt)
200...1999Ω 1Ω

rated voltage: 95...270V
frequency: 45...65Hz

Measurement of earthing  RE
Rated voltage in accordance with IEC 61557-5:
0,5Ω…1,99kΩ for 50V
0,56Ω…1,99kΩ for 25V

Range Resolution Accuracy
0,00...9,99Ω 0,01Ω ±(2% m.v. + 4 dgt)
10,0...99,9Ω 0,1Ω ±(2% m.v. + 3 dgt)
100...999Ω 1Ω
1,00...1,99kΩ 0,01kΩ

Insulation resistance measurement
Measurement range in accordance with IEC 61557-2:
- for UN = 50V: 50kΩ...250MΩ
- for UN = 100V: 100kΩ...500MΩ
- for UN = 250V: 250kΩ...1GΩ
- for UN = 500V: 500kΩ...2GΩ
- for UN = 1000V: 1MΩ...3GΩ

Display range*) Resolution Accuracy**)
0...1999kΩ 1kΩ
±(3% m.v. + 8 dgt)
2,00...19,99MΩ 0,01MΩ
20,0...199,9MΩ 0,1MΩ
200...999MΩ 1MΩ
1,00...3,00GΩ 0,01GΩ ±(4% m.v. + 6 dgt)

*)   limited to measurement range.
**) with UNI-Schuko additional error ±2%.

Phase sequence
- phase sequence indicator: forward, reverse
- mains voltage range UL-L: 100...440V (45…65Hz) UL-L: 100...440V (45...65Hz)
- display of pase-to-phase voltages

Measurement of the active P, passive Q and apparent S power and cosφ
- Range of voltages ULN: 0...440V
- Nominal frequency of the network: 45...65Hz
- frequency measurement for voltage 50...440V in range 45,0...65,0Hz (accuracy max. ± 0,1%m.v. + 1 digit)
?- measurement cosφ: 0,00...1,00 (resolution 0,01)

Low voltage test of the circuit and insulation continuity
Test of PE wire continuity using a ±200mA current

Range Resolution Accuracy
0,00...19,99Ω 0,01Ω ±(2% m.v. + 3 dgt)
20,0...199,9Ω 0,1Ω
200...400Ω 1

?Voltage on open terminals: 4…9V
?Test current at R<2Ω: min. 200mA at rated battery voltage
Autocalibration of test leads
Measurements for both polarizations of the current

RCD trigger and response time test tA (for tA mode)Measurement ranges
 in accordance with IEC 61557: 0ms ... up to the upper bound of the displayed value

Breaker Type Test Current
Multiplier		 Measurement
Range 		Resolution Accuracy
Standard 0,5*IΔn 0...300ms

1 ms



± (2% m.v. + 2 dgt)
1*IΔn
2*IΔn 0...150ms
5*IΔn 0...40ms
Selective 0,5*IΔn 0...500ms
1*IΔn
2*IΔn 0...200ms
5*IΔn 0...150ms

Precision of the differential current: for 0,5*IΔn:-8...0% dla 1*IΔn, 2*IΔn, 5*IΔn: 0...8%

Measurement of the RCD triggering current (IA) for sine waveform testing current

Selected
Current 		Range Resolution
 		 Test
Current		 Accuracy
10mA 3,3...10,0mA 0,1mA 0,3xIΔ..1,0xIΔ ± 5% IΔn
30mA 9,0...30,0mA
100mA 33...100mA 1mA
300mA 90...300mA
500mA 150...500mA
1000mA 330...1000mA 1mA
It is possible to start the measurement from the positive or negative half of the forced leaking current

Measurement of the RDC triggering current (IA ) for a unidirectional half period sine
waveform test current with a 6mA direct current offset

Selected
Current 		Range Resolution Test
Current
Accuracy
10mA 4...20,0mA 0,1mA 0,4xIΔn..2,0xIΔn ±10%IΔn
30mA 12,0...42,0mA 0,4xIΔn..1,4xIΔn
100mA 40,0...140mA 1mA
300mA 120...420mA
500mA 200...700mA

- a measurement is possible for a positive or negative forced leakage current

Measurement of the RCD triggering current (IA ) for direct testing current

Selected
Current 		Range Resolution  Test
Current  		Accuracy
10mA 4,0...20,0mA 0,1mA 0,4xIΔn..2,0xIΔn ±10%IΔn
30mA 12,0...60,0mA 1mA
100mA 40...200mA
300mA 120...600mA
500mA 200...1000mA

- a measurement is possible for a positive or negative forced leakage current
 

„m.v.” measured value.

其他推薦產品更多>>

您感興趣的產品PRODUCTS YOU ARE INTERESTED IN

環保在線 設計制作，未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.hg1112.cn,All rights reserved.

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，環保在線對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

請 登錄 后再收藏

提示

您的留言已提交成功！我們將在第一時間回復您~
四虎成人在线免费视频-亚洲熟女中文字幕天堂| 深夜三级福利在线播放-日韩精品一区二区在线天天狠天| 午夜日韩精品在线视频-亚洲网老鸭窝男人的天堂| 日韩精品人妻系列一区-亚洲女同性一区二区三区| 欧美视频在线观看国产专区-亚洲91精品在线观看| 三上悠亚免费观看在线-青青草原在线视频观看精品| 国产综合日韩激情在线-日韩精品人妻一专区二区三区| 国产精品久久久精品一区-99久久免费精品国产男女性高好| 国产亚洲欧美一区91-亚洲欧美一区二区在线| 人妻少妇无乱码中文字幕-人成免费视频一区二区| av一区免费在线观看-中文字幕日韩国产精品视频| 97香蕉久久国产在线观看-麻豆黄色广告免费看片| 久久特一级av黄色片-91社区视频免费观看| 亚洲一区二区少妇激情-国产精品美女久久高潮| 中文字幕偷拍亚洲九色-亚洲视频不卡一区二区天堂| 国产aa视频一区二区三区-国产精品久久久久久久毛片动漫| 午夜日韩精品在线视频-亚洲网老鸭窝男人的天堂| 国产精品美女在线网址-久草免费福利在线观看视频| 亚洲国产视频不卡一区-激情欧美视频一区二区| 欧洲精品一区二区三区中文字幕-91久久国产综合久久蜜月精品| 精品国产综合一区二区三区-蜜臀一区二区三区刺激视频| 中文字幕日本在线资源-国产+成+人+亚洲欧洲自线| 久久久精品欧美日韩国产-欧美精品乱码视频在线| 精品国产综合一区二区三区-蜜臀一区二区三区刺激视频| 久久久精品欧美日韩国产-欧美精品乱码视频在线| 欧洲精品一区二区三区中文字幕-91久久国产综合久久蜜月精品| 熟女熟妇伦51788-国产av在线播放一区二区三区| 一区二区三区女同性恋-熟妇高潮一区二区高清网络视频| 乱入一二三免费在线观看-久久精品亚洲精品国产色婷婷| 亚洲女人黄色录像一区-日韩av电影在线免费看| 久久99国产综合精品女人-日韩一区二区三区在线不卡| 亚洲国产精品一区二区av-日本一级黄色一区二区| 国产福利视频一区二区三区-日韩人妻中文视频精品| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 九九热这里只有精品九九-欧美日韩人妻精品一二三| 乱入一二三免费在线观看-久久精品亚洲精品国产色婷婷| 久久免费观看归女高潮特黄-黄色av一本二本在线观看| 在线视频成人一区二区-亚洲另类中文字幕在线| 成人免费资源在线观看-欧美国产日韩高清在线综合| 18禁真人在线无遮挡羞免费-中文字幕精品一区二区三区四区| 天天干天天天天天天天-亚洲综合av在线三区|