電改袋式除塵器產品【概述Introduction】
由于環保標準的不斷提高,許多在役的電收塵器已無法滿足新的粉塵排放要求,采用質優的袋除塵器改造電除塵器將是多數廠家的選擇。 目前該技術主要應用在水泥廠窯頭、窯尾,燃煤電廠等。
Due to the continuous improvement of environmental standards, many of the electric dust collector in service have been unable to meet the new dust emission requirements, USES the high quality of the bag filter transform electric dust collector will be the choice of most manufacturers. Mainly used in cement kiln kiln kiln head, preheater, coal-fired power plants, etc.
電改袋式除塵器【技術要點Technical points 】
●低排放效率高。改造后的除塵工藝和設備能滿足國國新頒布的排放標準,排放濃度控制在30mgm3以下,
以滿足環保日益嚴格的要求,_解決煙塵排放問題。
●安全可靠。改造后的主機系統能長期可靠安全運行。
●經久耐用長壽命。濾袋、脈沖閥等關鍵的部件和材料均可根據需要選用高質量產品,確保電改袋式除塵器長壽命運行。
●對前道煙氣處理要求低。對煙氣的處理只需降溫即可,除煙氣溫度和粉塵的黏性外,袋式除塵器的性能,幾乎不受煙塵其它性能的景響,電除源有的深度煙氣調質設施仍可以使用。
●節省投資。改造本著經濟施工方便的原則,盡可能利用原有除塵設施,降低改造費用,減少改造工作量, 縮短施工工期,除塵器本體基礎不變,_利用原除塵器本體的支架。
●Low emission efficiency. After transforming the dust removal technology and equipment to meet the new emission standards, emissions control under 30 mgm3 concentration,In order to meet the increasingly stringent environmental protection requirements, completely solve the problem of carbon,
●Safe and reliable. After transforming the host system can long-term reliable safe operation.
●Durable long life. Filter ba gpulse valve and other key components and materials all can choose according to need high quality products, to ensure the long life of bag filter operation and
●The former low flue gas processing requirements. In the flue gas cooling treatment only can, in addition to the flue gas temperature and dust sticky, bag filter performance,Almost not affected by the other performance of smoke ring, electrical source after flue gas conditioning facilities can still use some depth.
●Save the investment. Transformation in line with the principle of economy and high efficiency, convenient construction, as far as possible using the original dust removal facilities, reduce the modification cost, reduce the workload, shorten the construction period, dust catcher ontology based constant, fully using the original filter ontology of stents.