北京艾諾德儀器有限公司，致力于打造中國儀器航母品牌。
北京艾諾德儀器有限公司是集專業設計、開發、生產與銷售于一體的*股份制企業，專注于新型材料試驗機的研制、材料檢測技術的提高及材料試驗方法的創新，是國內的材料試驗檢測儀器的生產企業。
隔水式培養箱
型號：G82104
G82104隔水式培養箱技術指標
一、隔水式培養箱
適用范圍：
適用于醫療衛生，醫藥，生物，化學，農業科學等科研部門進行恒溫培養必需的專業設備。
二、隔水式培養箱結構特點
1、隔水式培養箱采用微處理器控制，具有監測、控制溫度和保護等功能。箱內照明燈可觀察箱內培養物。采用優質不銹鋼內膽，*腐蝕。
2、本設備外箱是冷軋鋼板、表面采用靜電噴塑工藝、內膽為不銹鋼、保溫層由聚氨脂發泡形成，透光窗采用雙層玻璃以確保箱內的保溫性能（低溫培養箱和BOD等要求不透光的培養箱無玻璃窗），箱體內部有冷、熱氣流風道使箱內氣體循環流暢、溫度更加均勻。
3、設備的控溫系統，智能型應用*的電子電路，實現模擬控制。采用自調整PID系統，加熱執行系統采用“過零"無觸點開關電路技術，因而實現了脈沖調寬方式加熱，使其溫度控制波動范圍小于0.5℃。
三、隔水式培養箱 技術參數：
1、控溫范圍：室溫+5℃~65℃
2、分 辨 率：0.1℃
3、波 動 度：≤±0.5℃
4、均 勻 度：≤±1%
5、擱板負荷：45kg/m2
6、不銹鋼內膽，智能微電腦控溫
7、加熱方式：水套式
A、接通電源：將三芯插頭插入電源插座，把面板上電源開關置“開"的位置，此時儀表出現數字顯示，表示設備進入工作狀態。
B、將設定-測量開關置于設定，調節調溫旋鈕或觸摸鍵，觀察數字溫度表指示即為所需設定溫度值 。將設定-測量開關置于測量，設備即進入自動控溫的工作狀態。加熱、制冷、保護三個指示燈交替提示設備所處的工作狀態。
C、照明燈開關，需要照明時置“開"位置
D、霉菌培養箱殺菌時，打開殺菌燈開關。
E、智能式和特種要求另付使用說明書。
五、 隔水式培養箱 注意事項
a） 本設備落地后，如地面不平應以墊平。
b） 設備的搬動要平行移動，任何一方向傾斜角應小于45度。
c） 本設備在正常運行時，箱內載物擺放應不影響空氣流通，以保證箱內溫度均勻。
d） 箱壁內膽和設備表面要經常擦拭，以保持清潔。
e） 設備*不用，應撥掉電源線，以防止設備帶電傷人。并應定期（一般一季度）按使用條件運行2-3天，以驅除電氣部件的潮氣，避免損壞有關器件。
f） 本設備如發生故障，應由專業人員或生產廠家維修解決。
Product name: water-jacket incubator
Model: G82104
G82104 water-jacket incubator technical indicators
A, scope of application:
Applicable to health care, medicine, biology, chemistry, agricultural scientific research departments such as thermostatic c*tion necessary professional equipment.
Second, the water-jacket incubator structure characteristics
1, the water-jacket incubator controlled by microprocessor, with functions of monitoring, control temperature and protection. The lighting in the cabinet can be viewed in the culture. Made of high quality stainless steel tank, never corrosion.
2, this equipment carton is cold rolling steel plate, surface electrostatic coating process for stainless steel, the tank, the thermal insulation layer formed by polyurethane foam, pervious to light use double deck glass window to ensure that the insulation in the cabinet (such as low temperature incubator and BOD asked not pervious to light incubator, no glass Windows), body inside have cold, heat flow duct make the gas circulation fluid, temperature in the cabinet is more even.
3, equipment, temperature control system, inligent application of advanced electronic circuit, realize the simulation control. By self-tuning PID system, heating execution system adopt "zero" non-contact switch circuit technology, thus realizes the wide pulse adjustable heating way, make its temperature control range is less than 0.5 ℃.
Three, water-jacket incubator technical parameters:
1, the range of temperature control: room temperature + 5 ℃ ~ 65 ℃
2, distinguishing rate: 0.1 ℃
3, wave mobility: plus or minus 0.5 ℃ or less
4, all evenness: plus or minus 1% or less
5, shelf load: 45 kg/m2
6, the stainless steel tank, inligent microcomputer temperature control
7, heating mode: water jacket type
A, processing power: insert the plug of the three core power socket, put on the power switch panel "open" position, at this time digital display instrument, said equipment.
B, will be set - measure switch on set, adjust the temperature control knob or touch keys, watch digital thermometer indicator is needed to set temperature. Will set - switch in measurement, namely into the automatic temperature control equipment working condition. Heating, refrigeration, protect the three light tip alternay equipment are in working condition.
C, light switch, in need of lighting "open" position
D, mold incubator sterilization, open the sterilization lamp switch.
E, the inligent type extra instruction for use and special requirements.
Five, the water-jacket incubator considerations
A) the equipment after landing, such as uneven ground to cushion flat.
B) the equipment move to parallel move, any direction Angle should be less than 45 degrees.
C) when this instrument works normally, the placement of the material shall not influence the air circulation, for ensuring the evenness of temperature in the cabinet.
D) the box wall tank and equipment always wipe the surface, to keep them clean.
E) equipment without for a long period of time, disconnect the power cord, in order to prevent the device charged cuts. And should be regularly (generally in the first quarter) according to the conditions of use, 2 to 3 days to ward off electrical component moisture, avoid damage to the device.
F) this equipment such as failure occurs, shall be settled by professional maintenance personnel or the manufacturer.
For more details water-jacket incubator please inquire
：
售后服務承諾：
1、服務宗旨：快速、果斷、準確、周到、*
2、服務目標：服務質量贏得用戶滿意
3、服務效率：保修期內或保修期外如設備出現故障，供方在接到通知后，1-3個工作日內予以解決。 用戶可以通過售后咨詢有關技術問題，并得到明確的解決方案
4、服務原則：儀器儀表產品保修期為1年，在保修期內供方將免費維修和更換屬質量原因造成的零部件損壞，保修期外零部件的損壞，提供的配件只收成本費，由需方人為因素 造成的設備損壞，供方維修或提供的配件均按成本價計。
會員1.png)
