美國controller數顯微差壓變送器865系列

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號Series 865

品牌

廠商性質其他

所在地上海

在線詢價 收藏產品查看聯系電話

聯系方式：張先生查看聯系方式

更新時間：2022-08-02 11:16:18瀏覽次數：2048次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  美國Controller壓力變送器

全部產品列表

暫無信息

上海華脈實業有限公司

經營模式：其他

商鋪產品：773條

所在地區：上海上海市

聯系人：張先生（區域經理）

詢價 給他留言

產品簡介

易于閱讀的顯示屏（0.38“高度）可在壓力范圍從0/0.25“WC0/15PSI 輸出穩定的0.5％FSO 完善各種應用，如管靜，VAV和風扇，控制空氣和惰性氣體接線簡單方便，通過可插拔螺釘端子塊客戶的具體要求進行校準壓力范圍能夠處理高過壓內部調理，能夠自動接受不受監管的12 - 24 VDC或24 VAC電源反向電壓保護。。美國controller數顯微差壓變送器865系列

詳細介紹

美國controller數顯微差壓變送器865系列

Series 865 Pressure Transducer with Display

Specifications

Accuracy*:	<+/-1.0% FSO
Stability:	+/-0.5% FSO/yr
Thermal Effects:	+/-0.075%/°C
Overpressure:	1-10”WC = 100”WC 11-20”WC = 10x rated pressure 21-30”WC = 5x rated pressure Over 30”WC = 45 PSI
FSO Pressure Range:	0/0.25”WC up to 0/15PSI (bi-directional ranges available)
Compensated Range:	10° to 50°C
Media:	Non-corrosive, non-ionic gases
Operating Humidity:	90% RH non-condensing
Operating Temp:	-25° to 70°C
Input Supply**:	12-24 VDC/24VAC
Supply Current:	<30mA
Load Resistance:	2KΩ minimum on voltage out, 250Ωmaximum loop resistance on 4-20mA output (500Ω max loop resistance available upon request**)
Output Signal:	1-5VDC, 1-6VDC, 1-10VDC or 4-20mA* (call for custom outputs)
Circuit Protection:	Output limited and reverse voltage protected
Electrical Connections:	Pluggable Screw Terminal Block
Pressure Connections:	Barbed fitting for 1/8” ID tubing
Enclosure:	Impact resistant ABS plastic
Dimensions:	Approx. 3.5” x 2.7” x 1.4” (8.7cm x 6.8cm x 3.5cm)

* Includes non-linearity hysteresis and non-repeatability at a fixed temperature
** An input of 18-24VDC/AC is required to drive a 500Ω load; the same input is also required for a 1-10VDC output
*** 3-wire 4-20mA

Package Drawing

CLICK TO ENLARGE

How to Order

A typical order number consists of the model number, pressure range, pressure unit, output and mounting connection.

Model	Type	Output Signal	FSO Pressure Range	Calibration Pressure
865	D = Differential or Gage*	0…..1 to 5 volts	0…..0.25″WC to 5″WC	Customer designated exact FSO
		1…..1 to 6 volts	1…..>5″WC to 13″WC
		2…..1 to 10 volts**	2…..>0.5PSI to 1PSI
		3…..4-20mA (250Ω load)	3…..>1PSI to 5PSI
		4…..4-20mA (500Ω load)**	4…..>5PSI to 15PSI
		5…..Custom Output

Example: 865D-01 Cal Pressure = 6” WC. “Pressure Range” is not a specific number. Please indicate exact calibration pressure. (This unit has an output of 1-5 VDC and will be calibrated to 6” WC.) If a custom output is needed, the exact output must be specified.

* With a gage application, one of the two ports is vented to atmosphere
** With a 1-10 VDC output as well as with a 4-20mA output that needs to drive a 500Ω load a 18-24
VDC/24VAC input is required.

Features and Applications

Easy to read display (0.38” height)
Available in pressure ranges from 0/0.25”WC up to 0/15PSI
Output stability of 0.5% FSO
Perfect for a variety of air and inert gas applications such as duct static, VAV and fan control
Easy wiring via a pluggable screw terminal block
Pressure range calibrated to customer’s specific requirement
Able to handle high overpressure
Internally conditioned allowing it to automatically accept unregulated 12- 24 VDC or 24 VAC power
Reverse Voltage Protection