LX-8824電線加熱變形試驗機
PARALLEL PLATE PLASTOMETER 電線加熱變形試驗機
試驗標準TEST STANDARD：本產品符合JIS-C-3005等試驗標準
產品特點 PRODUCT FEATURES: 電線加熱變形試驗機
本機一定溫度中，加熱 30 分鐘后，夾在本機平行板間，加規定之荷重，于同溫下再經 30 分鐘，然后以加熱前后之厚度差，除以加熱前厚度，以百分比為單位，即為變形率。
This machine is used for the heat deformation test of power cords。Put specimen into test chamber of this machine under a certain temperature for 30 minutes，then clamp specimen between two parallel plates，the upper plates being subject to a constant load under the same temperature for 30 minutes。Afterwards，the differential thickness before / after heating is
divided by the thickness before heating and multiplied by % for being unit，that is deformation。
技術規格SPECIFICATION：
| 試料數量 Specimen volume | 3 組 （ sets ） |
| 溫度控制器 Temp. controller | PID 數位設定 PID digital setting |
| 溫度范圍 Temperature range | 室溫 Room temp. ~ 200℃ |
| 砝碼 Load | 50，100，200，500，1000g |
| 厚度計 Micro-gauge | 0.01 ~ 10mm |
| 電源 Power | AC220V / 50Hz |
| 體積 Dimension （DxH） | 121 x 50 x157cm |
| 重量 Weight | 113Kg |
環保在線