惠州市和成機械設備有限公司
會員1.png)
| 參 考 價 | 面議 |
產品型號HC
品 牌
廠商性質生產商
所 在 地惠州市
聯系方式：王先生查看聯系方式
更新時間：2022-08-03 13:42:16瀏覽次數：572次
聯系我時，請告知來自 環保在線惠州市和成機械設備有限公司 188 9634 6260
l 設備名稱：自動液壓模架
Name: Automatic Hydraulic Mould Carrier
l 型號：HC-M2000/14型
Type: HC-M2000/14
l 數量：1臺
QTY: 1 sets
l 電器控系統: 1套
Electric control system: 1 sets
l 設備技術參數明細/technique parameters list
模板鎖緊面尺寸 2100mm*1400mm
Plate size 2100mm*1400mm
閉合高度 300-900mm 可調
Height of Closing 300-900mm adjustable
開模角度 0-60°
Upper plate tilting to open 0-60°
鎖模力 200kn
Closing force 200KN
開模力 70kn
Opening force 70KN
下模板行程 200mm
Lower plate stroke 200mm
開、閉模時間 12s
Complete opening/closing time 12s
模具固定栓 DIN 650-18H12-(16)
Tools fixation slots DIN 650-18H12-(16)
模具溫度 50°-80°
Mould temperature 50°-80°
控制電壓 DC24V
Control power DC24V
l 生產流程說明：
Producing process:
- 液壓系統固定在地面上，驅動1臺模架開閉動作
Hydraulic system is fixed on the floor, which is used to drive mould carrier opening and closing.
- 鎖模流程：整理模具-噴脫模劑-安全鉤脫鉤-合模-鎖模缸啟動鎖模-液壓缸頂出模架-閉模灌注-熟化-開模
Mould locking process: clean mould-spray release agent-safety hook release-close mould-cylinder start-closing inject-curing-open
l 灌注方式：閉模式灌注
Injection way: closing injection
l 控制操作系統：一套
Control system: 1 set
采用西門子公司PLC*控制，OP操作系統具有強大的功能菜單，顯示壓力、時間、溫控、生產參數設定、安全監控、警示等。
PLC adopts Germany SIMENS; touch screen has powerful menu function, which can display the pressure, time, temperature control, producing parameters, safety monitoring, alarm and so on.
l 模具加溫設備：1臺
Heating equipment: 1 set
- 功率12KW*1臺通過水循環分別給2套液壓模具加溫及溫度控制
1 set of 12 kw cycle water to heat the mould and control the temperature.
- 可分別實行獨立溫控
Control the temperature separay.
l 設備安全保護系統：
Safety system:
- 整套模架升降開閉由液壓系統自動完成
The mould carrier’s lift, opening and closing are finished by hydraulic system.
- 模架配有防脫落機械保險裝置
Anti fall mechanical safety device.
- 模具兩側裝有紅外線光柵安全感應器
There are red-ray barrier sensors on the both 2 sides of the mould carrier.
- 設備設有急停及安全自動警示裝置
Emergency stop and alarm system
- 設備配有防護欄
The equipment has light barriers.
惠州市和成機械設備有限公司 188 9634 6260
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
