請輸入產品關鍵字:
郵編:310012
聯系人:采購部
留言:在線留言
商鋪:http://www.hg1112.cn/st89286/
如何獲得更理想的ELISA實驗結果
點擊次數:485 發布時間:2012-8-14
為了獲得更理想的ELISA實驗結果,請您
1、在ELISA實驗過程中,請配制標準品及工作液A和B,以避免由于不準確稀釋而造成的濃度誤差;
2、在ELISA實驗過程中,酶標板在溫育時應加膜覆蓋以避免液體蒸發;
3、在ELISA實驗過程中,檢測液A和檢測液B,以及底物溶液在使用前,應置于37℃溫育30分鐘待用;
4、在ELISA實驗過程中,洗板后應盡快進行下一步操作,避免酶標板長時間處于干燥狀態。
In order to obtain the optimal ELISA results
1.During ELISA assay operation, Please carefully reconstitute Standards or working Detection Reagent A and B according to the instruction and avoid foaming and mix gently until the crystals have compley dissolved;
2.During ELISA assay operation, Proper adhesion of plate sealers during incubation steps is necessary;
3.During ELISA assay operation, Substrate, Detection Reagent A and Detection Reagent B should be incubate for 30 min at 37℃ before use;
4.During ELISA assay operation, After the every step of aspiration / wash, please do not delay entering into the next step in order not to let the assay plate "too dry".