污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
廣州市瑞東電子科技有限公司
會員1.png)
廣州市瑞東電子科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地廣州市
聯系方式：查看聯系方式
更新時間：2024-11-21 09:25:37瀏覽次數：15次
聯系我時，請告知來自 環保在線Feature Compliant with QSFP28 MSACompliant with SWDM MSACompliant with IEEE802.3bm CAUI-4Hot-pluggable QSFP28 form factor4x25Gb/s 850mm VCSEL-based transmitterSupports 103.1Gbps......
100G QSFP28 SWDM4 Optical Transceiver
1. Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Units |
| Storage Temp Range | Ts | -40 | +85 | ℃ |
| Supply Voltage | Vcc | -0.5 | 3.6 | V |
| Relative Humidity | RH | 15% | 85% | |
2. Operating Conditions
| Parameter | Symbol | Min | Max | Units |
| Case Temp-Operating | Tcase | 0 | 70 | ℃ |
| Supply Voltage | Vcc | 3.14 | 3.46 | V |
| Power Consumption | P | | 3.5 | W |
| Link Distance on OM3 Fiber | | | 75 | M |
| Link Distance on OM4 Fiber | | | 100 | M |
| Link Distance on OM5 Fiber | | | 150 | M |
3. Optical Characteristics
| Transmitter Parameter | Lane | Min | Typical | Max | Unit | Note |
| Signaling rate, each lane |
| 25.78125±100ppm | Gb/s |
| ||
|
Lane Wavelength Range | Lane0 Lane1 Lane2 Lane3 | 844 874 904 934 |
| 858 888 918 948 |
nm |
|
| Modulation Format |
| NRZ |
|
| ||
| Difference in launch power between any two lanes |
|
|
| 4.5 | dBm |
|
| RMS Spectral width |
|
|
| 0.59 | nm | 1 |
| Optical Modulation Amplitude (OMA), each lane |
| -5.5 |
| 3 | dBm | 2 |
| Average Launch Power per Lane @ TX Off State |
|
|
| -30 | dBm |
|
|
Launch Power in OMA minus TDEC | Lane0 Lane1 Lane2 Lane3 | -7 -7 -7.4 -7.7 |
|
|
dBm |
|
|
Transmitter and Dispersion Eye Closure | Lane0 Lane1 Lane2 Lane3 |
|
| 4 4 4.4 4.8 |
dB |
3 |
| Extinction Ratio |
| 2 |
|
| dB |
|
| Optical Return Loss Tolerance |
|
|
| 12 | dB |
|
| Encircled Flux |
| ≥86% at 19 um ≤30% at 4.5 um | 4 | |||
| Transmitter eye mask definition {X1,X2, X3, Y1, Y2, Y3} Hit ratio 1.5x10-3 hits per sample |
| {0.3,0.38,0.45,0.35,0.41,0.5} |
| |||
| Notes: 1. RMS spectral width is the standard deviation of the spectrum. 2. The normative lowest value of OMA for a compliant transmitter is ‘ Launch power in OMA minus TDEC, each lane (min)’ plus the actual value of ‘TDEC’, but with a value of at least ‘OMA, each lane (min)’ . 3. TDEC is calculated from the measured TDECm using the methods in 3.6. TDECm is measured following the method in IEEE 802.3 clause 95.8.5 using a 12.6 GHz bandwidth reference receiver for all lanes. 4. If measured into type A1a.2 or type A1a.3 50 um fiber in accordance with IEC 61280-1-4. | ||||||
| Receiver Parameter | Lane | Min | Typical | Max | Unit | Note |
| Signaling rate, each lane |
| 25.78125±100ppm | Gb/s |
| ||
|
Lane Wavelength Range | Lane0 Lane1 Lane2 Lane3 | 844 874 904 934 |
| 858 888 918 948 |
nm |
|
| Modulation Format |
| NRZ |
|
| ||
| Damage Threshold |
| 4.4 |
|
| dBm |
|
|
Average Receive Power, each lane | Lane0 Lane1 Lane2 Lane3 | -9.5 -9.4 -9.4 -9.4 |
|
3.4 |
dBm |
|
| Receiver Power, each lane (OMA) |
|
|
| 3 | dBm |
|
| Receiver Reflectance |
|
|
| -12 | dB |
|
|
unStressed Receiver Sensitivity(OMA) | Lane0 Lane1 Lane2 Lane3 |
|
| -8.2 -8.4 -8.6 -8.8 |
dBm |
1 |
| RX_Los_Assert |
| -30 |
|
| dBm |
|
| RX_Los_De-ASSERT |
|
|
| -12 | dBm |
|
| RX_Los_Hysteresis |
| 0.5 |
|
| dBm |
|
| 1.unstressed sensitivity at BER of 5E-5(pre FEC) | ||||||
4. Digital Diagnostic Monitoring Specifications
| Parameters | Unit | Specification |
| Temperature Monitor | ℃ | ± 3 |
| Voltage Monitor | V | ± 5 % |
| I_bias Monitor | mA | ± 10 % |
| Received Power (Rx) Monitor | dB | ± 3.0 |
| Transmit Power (Tx) Monitor | dB | ± 3.0 |
5. Electrical Characteristics
| Transmitter electrical input signal characteristics(TP1) | Min | Typical | Max | Unit |
| Signaling rate per lane (range) | 25.78125 ± 100 ppm | GBd | ||
| Differential input return loss | Equation (83E–5) |
|
| dB |
| Differential to common mode input return loss | Equation (83E–6) |
|
| dB |
| Differential termination mismatch |
|
| 10 | % |
| Module stressed input test | See 83E3.4.1 |
|
|
|
| Differential pk-pk input voltage tolerance | 900 |
|
| mV |
| DC common mode voltage | -350 |
| 2850 | mV |
| Single ended voltage tolerance range | -0.4 |
| 3.3 | V |
| Receiver electrical output signal characteristics(TP4) | Min | Typical | Max | Unit |
| Signaling rate per lane (range) | 25.78125 ± 100 ppm | GBd | ||
| AC common-mode output voltage (RMS) |
|
| 17.5 | mV |
| Differential output voltage |
|
| 900 | mV |
| Eye width | 0.57 |
|
| UI |
| Eye height, differential | 228 |
|
| mV |
| Vertical eye closure |
|
| 5.5 | dB |
| Differential output return loss | Equation (83E–2) |
|
| dB |
| Common to differential mode conversion return loss | Equation (83E–3) |
|
| dB |
| Differential termination mismatch |
|
| 10 | % |
| Transition time (20% to 80%) | 12 |
|
| ps |
| DC common mode voltage | -350 |
| 2850 | mV |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保四組除塵方管自動拋光/拉絲機
CBT-HFGBZP003 ￥126000
STW 壓力傳感器 14.180703.1002 43992
STW 14.180703.1002 43992 面議
STÖGRA 伺服電機 SM 56.2.18J1,5
STÖGRA SM 56.2.18J1,5 面議環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
