100G QSFP28 ER4 optical transceiver module, support 100Gb/s and up to 40 km transmission on SM fiber, it works in high-speedIDC connection solutions, and so on.Features: 4 lanes MUX/DEMUX design......

詳細介紹

100G ER4 40km QSFP28 Transceiver Hot Pluggable, Duplex LC Connector, EML+APD SingleMode DDM

The 100G ER4 40KM RQ-100G-ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 100GbASE-ER4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard. The module converts 4 inputs channels (ch) of 25.78 Gbps electrical data to 4 lanes optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 lanes signals, and converts them to 4 lanes output electrical data.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
Storage Temperature	TS	-40		+85	°C
Supply Voltage	VCCT, R	-0.5		4	V
Relative Humidity	RH	0		85	%

Recommended Operating Environment

Parameter	Symbol	Min.	Typical	Max.	Unit
Case operating Temperature	TC	0		+70	°C
Supply Voltage	VCCT, R	+3.13	3.3	+3.47	V
Supply Current	ICC		1000	1500	mA
Power Dissipation	PD			5	W

Electrical Characteristics(TOP = 0 to 70 °C, VCC= 3.13 to 3.47 Volts

Parameter	Symbol	Min	Typ		Max		Unit	Note
Data Rate per Channel		-	25.78125				Gbps
Power Consumption		-	3.3		5		W
Supply Current	Icc		1.0		1.5		A
Control I/O Voltage-High	VIH	2.0			Vcc		V
Control I/O Voltage-Low	VIL	0			0.7		V
Inter-Channel Skew	TSK				35		Ps
RESETL Duration			10				Us
RESETL De-assert time					100		ms
Power On Time					100		ms
Transmitter
Single Ended Output Voltage Tolerance		0.3		Vcc		V		1
Common mode Voltage Tolerance		15				mV
Transmit Input Diff Voltage	VI	150		1200		mV
Transmit Input Diff Impedance	ZIN	85	100	115
Data Dependent Input Jitter	DDJ		0.3			UI
Receiver
Single Ended Output Voltage Tolerance		0.3		4		V
Rx Output Diff Voltage	Vo	370	600	950		mV
Rx Output Rise and Fall Voltage	Tr/Tf			35		ps		1
Total Jitter	TJ		0.3			UI

Note:

1. 20～80%

Optical Parameters(TOP = 0 to 70°C, VCC = 3.0 to 3.6 Volts)

Parameter	Symbol	Min	Typ	Max		Unit		Ref.
Transmitter
Wavelength Assignment	L0	1294.53	1295.56		1296.59		nm
	L1	1299.02	1300.05		1301.09		nm
	L2	1303.54	1304.58		1305.63		nm
	L3	1308.09	1309.14		1310.19		nm
Side-mode Suppression Ratio	SMSR	30	-		-		dB
Total Average Launch Power	PT	0	-		8.3		dBm
Average Launch Power, each Lane		-2	-		4		dBm
Difference in Launch Power between any two Lanes (OMA)		-	-		6.5		dB
Optical Modulation Amplitude, each Lane	OMA	-4			4.5		dBm
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane		-4.8	-				dBm
TDP, each Lane	TDP				2.2		dB
Extinction Ratio	ER	4	-		-		dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Optical Return Loss Tolerance		-	-		20		dB
Average Launch Power OFF Transmitter, each Lane	Poff				-30		dBm
Relative Intensity Noise	Rin				-128		dB/HZ	1
Optical Return Loss T Total		-	-		12		dB
Receiver
Total Damage Threshold	THd	0				dBm		1
Total Overload	R	-1				dBm		1
Receiver Sensitivity per Lane	R			-20		dBm
Average Power at Receiver Input, each Lane	R	-20		-7		dBm
RSSI Accuracy		-2		2		dB
Receiver Reflectance	Rrx			-26		dB
Receiver Power (OMA), each Lane		-	-	-3		dBm
LOS De-Assert	LOSD			-25		dBm
LOS Assert	LOSA	-35				dBm
LOS Hysteresis	LOSH	0.5				dB

Note

1. 12dB Reflection

Order information

Product Number	Data Rate(Gb/s)	Wavelength(nm)	Reach(km)	LD	Tx Power(dBm)	PD	Rx Sens(dBm)	Temperature(℃)
RQ-100G-ER4	100	1310nm	40	LAN WDM EML	-4~4.5	APD	<-14.65	0~70