當前位置：廣州市瑞東電子科技有限公司>>光模塊>>400G光模塊>>40G QSFP+ EZR4 100Km 1550nm LC Optical Transceiver

40G QSFP+ EZR4 100Km 1550nm LC Optical Transceiver

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地廣州市

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2024-11-20 12:17:28瀏覽次數：19次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  光模塊

3G 視頻光模塊 1080P 60GHZ

12G 視頻光模塊 4K 60GHZ

200G光模塊

100G光模塊

50G光模塊

25G光模塊

10G光模塊

16G光模塊

400G光模塊

40G光模塊

155M-2.5G光模塊

全部產品列表

暫無信息

廣州市瑞東電子科技有限公司

經營模式：其他

商鋪產品：225條

所在地區：

詢價 給他留言

產品簡介

Features:4 lanes MUX/DEMUX design100GHz ITU Grid, C Bａnd DWDM EML transmitter, APD photo-detectorUp to 11.2Gbps per channel bandwidthAggregate bandwidth of 40GbpsDuplex LC connecto......

詳細介紹

RQ-40G-EZR4

40Gb/s EZR4 100km QSFP+ Transceiver Hot Pluggable, Duplex LC Connector, Single mode

Description:

The RQ-40G-EZR4 is a transceiver module designed for 100km optical communication applications. The design is compliant to 40GBASE-EZR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels of 10Gb/s electrical data to 4 DWDM optical signals and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 DWDM channels signals and converts them to 4 channel output electrical data.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
Storage Temperature	TS	-40		+85	°C
Supply Voltage	VCCT, R	-0.5		4	V
Relative Humidity	RH	0		85	%

Recommended Operating Environment:

Parameter	Symbol	Min.	Typical	Max.	Unit
CaseoperatingTemperature	TC	0		+70	°C
Supply Voltage	VCCT, R	+3.13	3.3	+3.47	V
Supply Current	ICC			1000	mA
Power Dissipation	PD			3.5	W

Electrical Characteristics (TOP= 0 to 70 °C, VCC= 3.13 to 3.47 Volts

Parameter	Symbol	Min	Typ	Max	Unit	Note
Data Rate per Channel		-	10.3125	11.2	Gbps
Power Consumption		-	2.5	5	W
Supply Current	Icc		0.75	1.3	A
Control I/O Voltage-High	VIH	2.0		Vcc	V
Control I/O Voltage-Low	VIL	0		0.7	V
Inter-Channel Skew	TSK			150	Ps
RESETL Duration			10		Us
RESETL De-assert time				100	ms
Power On Time				100	ms
Transmitter
Single Ended Output Voltage Tolerance		0.3		4	V	1
Common mode Voltage Tolerance		15			mV
Transmit Input Diff Voltage	VI	150		1200	mV
Transmit Input Diff Impedance	ZIN	85	100	115
Data Dependent Input Jitter	DDJ		0.3		UI
Receiver
Single Ended Output Voltage Tolerance		0.3		4	V
Rx Output Diff Voltage	Vo	370	600	950	mV
Rx Output Rise and Fall Voltage	Tr/Tf			35	ps	1
Total Jitter	TJ		0.3		UI

Note:

1. 20～80%

Optical Parameters (TOP = 0 to 70°C, VCC = 3.0 to 3.6 Volts)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Transmitter
Wavelength Assignment	λ	X-1	X	X+1	nm
Side-mode Suppression Ratio	SMSR	30	-	-	dB
Total Average Launch Power	PT		-	10	dBm
Average Launch Power, each Lane		+1	-	5	dBm
Transmit OMA per Lane	TxOMA	0.3		5.0	dBm
Difference in launch power between any two lanes (OMA)				4.7	dBm
Transmitter Dispersion Penaltyeach Lane	TDP			2.6	dB
Extinction Ratio	ER	5.5	6.5		dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Optical Return Loss Tolerance		-	-	20	dB
Average Launch Power OFF Transmitter, each Lane	Poff			-30	dBm
Relative Intensity Noise	Rin			-128	dB/HZ	1
Optical Return Loss Tolerance		-	-	12	dB
Receiver
Damage Threshold	THd	-3			dBm	1
Average Power at Receiver Input, each Lane	R	-25		-6	dBm
Receive Electrical 3 dB upper Cut off Frequency, each Lane				12.3	GHz
RSSI Accuracy		-2		2	dB
Receiver Reflectance	Rrx			-26	dB
Receiver Power (OMA), each Lane		-	-	-4	dBm
Receive Electrical 3 dB upper Cutoff Frequency, each Lane				12.3	GHz
LOS De-Assert	LOSD			-25	dBm
LOS Assert	LOSA	-35			dBm
LOS Hysteresis	LOSH	0.5			dB