污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
深圳市漢斯福特科技有限公司
深圳市漢斯福特科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地深圳市
聯系方式：查看聯系方式
更新時間：2024-11-21 09:11:09瀏覽次數：69次
聯系我時，請告知來自 環保在線稱重儀表也叫稱重顯示控制儀表，是將稱重傳感器信號（或再通過重量變送器）轉換為重量數字顯示，并可對重量數據進行儲存、統計、打印的電子設備，常用于工農業生產中的自動化配料，稱重，以提高生產效率
稱重儀表也叫稱重顯示控制儀表，是將稱重傳感器信號（或再通過重量變送器）轉換為重量數字顯示，并可對重量數據進行儲存、統計、打印的電子設備，常用于工農業生產中的自動化配料，稱重，以提高生產效率。
美國Transducer Techniques SSI是一款智能插拔式TEDS IEEE 1451.4儀表，連接稱重傳感器或者扭矩傳感器TEDS接頭，可自動校準。SSI內置雙報警繼電器，伴隨LED燈和聲響指示。自帶USB接口，將數據采集給PC端。
The SSI is a Plug & Play Smart TEDS IEEE 1451.4 compliant portable handheld Load Cell Indicator. Just plug in a TEDS compatible Load Cell or Torque Sensor and the SSI will automatically selfcalibrate. When used with a non-TEDS Load Cell or Torque Sensor, the SSI can be set up by simple front panel push buttons. The SSI can be scaled to a full 5 digit display from 0 to 99,999 counts to read directly in engineering units such as grams, ounces, pounds, inch pounds, etc. The SSI also has a Units key for automatic conversion of readings for load, torque and pressure. The SSI has an ultra-fast signal-sampling rate of 15,360 samples/second for true peak and/or valley testing capability. Auto-tare allows the meter to be set to zero for any input signal level. The SSI also features a USB port for data logging to a PC. You can also log data to the SSI’s internal memory storing up to 8,000 time and date stamped readings. The SSI also features 2 built-in solidstate alarm relays with LED and audible indicators. The SSI will operate up to 65 hours on a single charge or use the included battery charger for applications where the SSI is mounted permanently.
詳情請聯系我們
Type Reflective LCD, 2.56" x 1.73" (65 x 44 mm) window
Main numeric display 6 seven-segment digits, 0.57" (14.5 mm) high
Other displayed items 4-digit recall number, 10-segment bar graph,
choice of 18 units of measure, battery life indicator, operating mode indicator
Overload indication Display flashes at 120% of HiRead
Normal data sampling rate 15,360 samples/second (setting for 60 Hz noise rejection)
12,800 samples/second (setting for 50 Hz noise rejection)
Normal conversion rate Every 256 samples
60/second (setting for 60 Hz noise rejection)
50/second (setting for 50 Hz noise rejection)
Fast conversion rates Every 2 to 128 samples (programmable)
Relay response rate Same as Normal conversion rate
Display update rate Every 16 conversions
3.750/second (setting for 60 Hz noise rejection)
3.125/second (setting for 50 Hz noise rejection)
Peak & valley capture rate (selectable) Every 2, 4, 8, 16, 32, 64, 128 or 256 samples
Peak & valley display update rate 3.750/second (setting for 60 Hz noise rejection)
3.125/second (setting for 50 Hz noise rejection)
Recommended load 120-10K ohm bridge
Bridge excitation voltage 3.0V
Provision for variations in bridge excitation Ratiometric operation
Signal span, max 15 mV
Transducer sensitivity range 1-5 mV / V
A-to-D converter resolution 16 bits (65,536 counts)
Signal resolution 0.5 μV/count
Accuracy at 25°C ±1.5 μV
Span Tempco 0.0015% of reading/°C
Zero Tempco 0.2 μV/°C
NMR with no filtering 90 dB
Signal filtering (selectable) 1) No filtering: 50 or 60 conversions/second
2) Batch average of 16 conversions
3) Moving average of conversions
Internal battery Rechargeable lithium ion
Battery capacity (nominal) 2400 mAh, 3.7V
RUN time on single battery charge Up to 65 hours with 350 ohm bridge
Battery charger Wall plug AC power unit
Battery charger input 100-240V ac, 50/60 Hz, 0.4A
Battery charger output 5.0V dc, 1.0A
訂貨型號
SSI N/A Smart Sensor Indicator
配件
USB-2.0A/B N/A USB 2.0 A/B 10ft Cable
SSI-AMB N/A Adjustable Mounting Bracket
SSI-TRES N/A TEDS Reader Editor Software
SSI-DLS N/A Data Logging Software
相關型號
DPM-3
SST-HV
SST-LV
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
