污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海新瑞都化工機械有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式:查看聯系方式
更新時間:2024-11-05 13:20:43瀏覽次數:99次
聯系我時,請告知來自 環保在線MBE-300 series pipeline emulsifier
Applicable to: Industrial pipeline continuous production, cycle operations and remote automatic control. Rotor design: design and manufacture from single stage---II level---III level duality MBE300-1 type technical parameters Note: 1. The flow in the table is the data measured when the medium is “water", and the flow rate of the materials will vary. 2. If the material has poor fluidity, it is recommended to feed the corresponding pump at the inlet. The pumping pressure is P≤0.2Mpa 3. The parameters in the table are subject to change without prior notice. The actual product shall prevail. 4. If a recycling process is used, it is recommended to use it in combination with a batch high shear dispersing emulsifier. 5. If there are high temperature, high pressure, flammable, explosive, corrosive and other working conditions, it is necessary to clearly provide relevant and accurate parameters for further selection and formulation. MBE300-II technical parameters Note: 1. The flow in the table is the data measured when the medium is “water", and the flow rate of the materials will vary. 2. If the material has poor fluidity, it is recommended to feed the corresponding pump at the inlet. The pumping pressure is P≤0.2Mpa 3. The parameters in the table are subject to change without prior notice. The actual product shall prevail. 4. If a recycling process is used, it is recommended to use it in combination with a batch high shear dispersing emulsifier. 5. If there are high temperature, high pressure, flammable, explosive, corrosive and other working conditions, it is necessary to clearly provide relevant and accurate parameters for further selection and formulation. MBE-300III technical parameters Note: 1. The flow in the table is the data measured when the medium is “water", and the flow rate of the materials will vary. 2. If the material has poor fluidity, it is recommended to feed the corresponding pump at the inlet. The pumping pressure is P≤0.2Mpa 3. The parameters in the table are subject to change without prior notice. The actual product shall prevail.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
上海新瑞都化工機械有限公司