當前位置：恩德斯豪斯（中國）自動化有限公司>>系統產品>>FieldPort SWA50適配器_恩德斯豪斯

FieldPort SWA50適配器_恩德斯豪斯

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2025-01-04 09:37:53瀏覽次數：36次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  系統產品

全部產品列表

暫無信息

恩德斯豪斯（中國）自動化有限公司

經營模式：其他

商鋪產品：203條

所在地區：

詢價 給他留言

產品簡介

產品規格參數輸出WirelessHARTand/orBluetooth®communicationinterface,Operatingfrequency:2

詳細介紹

產品規格參數

輸出

WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)

輸出

WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)

測量原理

無線HART
功能

Intelligent WirelessHART and/or Bluetooth® interface module for easy and fast connection to HART devices
證書

Non-hazardous area, ATEX, IEC Ex
輸入

One point-to-point with HART device
輸出

WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)
輔助電源/回路電源

Loop-powered 4 to 20 mA
外形尺寸（wxhxd）

W x H x D: 146 mm x 42 mm x 42 mm
(dimensions in mm 25.4 = 1 inch)
軟件

Internal software for reading data from HART field devices and communicating over WirelessHART and/or Bluetooth®
操作

Integral via DIP-switches,
Cell Phone configuration via SmartBlue App and Bluetooth®,
Field Xpert configuration via Bluetooth® or HART-modem,
PC configuration via FieldCare and HART-modem,
PC configuration via FieldCare and WirelessHART Gateway
工作電壓

24 V DC (min. 4 V DC, max. 30 V DC): min. 3.6 mA loop current required for start-up
Voltage drop if internal HART communication resistor is deactivated:
3.2 V in operation, < 3.8 V at start-up
Voltage drop if internal HART communication resistor is activated (270 Ohm):
< 4.2 V at 3.6 mA loop current, < 9.3 V at 22.5 mA loop current