The general purpose three-wire ultrasonic transmitter provides non-contact level measurement up to 24' or 7.4m with an internal relay that can be configured as a single-point alarm or latched on two points for automatic fill or empty control. The transmitter is ideally suited for challenging corrosive or waste liquids and is typically selected for atmospheric bulk storage and waste sump applications. Media examples include wastewater and resin.
Features
Integral relay for alarm or automatic fill-empty control
LED digital display indicates level in inches or centimeters
EasyCal simple push button calibration for all user set points
PP enclosure rated NEMA 4X with rugged PVDF transducer
Tech Tip
For applications with surface foam, turbulence or limited measurement space, install the transmitter in a 2" stand-pipe.
Specifications
Range:
6" to 24.5' (15cm to 7.4m)
Accuracy:
±0.25% of span
Resolution:
0.125" (3 mm)
Beam width:
8° conical
Dead band:
6" (15 cm)
Display type:
LED, 4-digit
Display units:
Inch or cm
Memory:
Non-volatile
Supply voltage:
14-36 VDC
Consumption:
200mA max.
Current flow:
Source/sink
Signal output:
4-20 mA, three-wire
Signal invert:
4-20 mA, 20-4 mA
Calibration:
Push button
Contact type:
(1) SPDT relay, latching
Contact rating:
250 VAC @ 10A
Contact logic:
Single point: alarm Two point: latching
Contact fail-safety:
Reverts to safe state during echo-loss
LED indication:
Relay status
Process temp:
F: -20° to 140° C: -4° to 60°
Temp. comp.:
Automatic
Ambient temp:
F: -40° to 140° C: -40° to 60°
Pressure:
30 psi (2 bar) @25° C., derated @1.667 psi (.113 bar) per °C. above 25° C.
Enclosure rating:
NEMA 4X (IP65)
Encl. material:
PP, UL94VO
Trans. material:
PVDF
Cable jacket mat.:
Vinyl
Cable type:
Pow./signal: 3-conductor Relay: 3-conductor
Cable length:
9" (22 cm)
Process mount:
2" NPT (2" G)
Mount. gasket:
± Viton®
Conduit entrance:
Single, 1/2" NPT
Classification:
General purpose
CE compliance:
EN 61326 EMC EN 61010-1 safety
Order
Compatible Products
DataView™ II LI55 Advanced Meter and Controller
The general purpose meter displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater.
Commander™ LI90, Advanced Micro PLC Controller
As a compact, powerful controller - the Commander series can be used in literally thousands of applications. From OEM machine control to machine monitoring in a plant environment, the Commander series can be instrumental in keeping you or your customer's automation activities running smoothly.