齒輪周節檢查儀404-006aa儀器工作原理aa儀器工作時齒頂圓頂上取三點作為定位基準，以被測齒輪任意一個周節調整儀器對零，來比較其它各齒周節與對周節的大小，最后進行數據處理，即可得到您所需測量周節的結果

詳細介紹

齒輪周節檢查儀

404-006	aa 儀器工作原理 aa 儀器工作時齒頂圓頂上取三點作為定位基準，以被測齒輪任意一個周節調整儀器對零，來比較其它各齒周節與對周節的大小，最后進行數 據處理，即可得到您所需測量周節的結果。
	Operating principle Three points should be selected as base at the cylindrical top while the tester is working, setting any pitch tester of measuring gear to zero, to compare the size of other pitch with the first pitch. The satisfied measuring results are obtained after data processing finished.

適用于檢查7 級或低于7 級精度的內外齒合直齒與斜齒圓柱齒輪的周節偏差。操作簡便，易于維修，可供各工廠計量室及車間使用。	This tester is suitable to measure accuracies of pitch deviation with inside and outside straight helical circular gear among seventh degree. Easy to operate and maintenance.
主要技術參數 Main technical parameter
被測齒輪模數 Measuring gear module	1-16mm
儀器指示表的分度值 Tester indicating	0.001mm
儀器示值誤差 Error indicating 在千分表任意0.1mm 范圍內允差 Within any 0.1mm microgauge range 在千分表全行程范圍內允差 Within ful distance range	±0.003mm ±0.01mm