污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
北京博倫經緯科技發展有限公司
參 考 價 | 面議 |
產品型號W200P W200P/L
品 牌
廠商性質其他
所 在 地
聯系方式:查看聯系方式
更新時間:2023-03-19 17:09:13瀏覽次數:213次
聯系我時,請告知來自 環保在線英國Vector W200P風向傳感器W200P/L
英國Vector風向風速傳感器是世界一級(First Class)測風傳感器。【W200P風向傳感器】具有較高的靈敏度,精密球形軸承具有防腐蝕、防塵、防潮,使傳感器可長期在野外各種天氣條件下工作,尤其適合于偏遠工作站。該傳感器在氣象、風資源評估、環境監測等領域有廣泛的應用。
風向傳感器 | W200P |
啟動風速 | 0.6m/s(當風向標與風向的角度大于45度時動作) |
風速 | >75m/s |
測量范圍 | 機械角度360度,允許連續轉動 |
精度 | 在穩定的5m/s風速時為±2度 |
分辨率 | ±0.2度 |
重復性 | ±0.5度 |
線性 | 滿刻度輸出的0.5% |
溫度范圍 | -50℃~+70℃ |
連續電角度 | 357.7°±1.5°(正北方2.3°缺口) |
變化電角度 | 356.5°±1.5°(3.5°盲區) |
電位器消耗電流 | 20mA |
典型壽命 | 5×107轉(10年) |
絕緣電阻 | 最小50MΩ |
電位計阻抗 | 1kΩ±10% |
電位器電壓 | 125V |
電能消耗 | -50~20℃時0.5W,70℃時線性減到0.25W |
溫度系數 | ±50ppm/℃ |
供電電壓 | 20V |
Windvanes | W200P |
Threshold: | 0.6m/s (standard), 0.75m/s (/WR), 0.5m/s (/LV) |
Distance Constant: | 2.3m (standard), 2.4m (/LV) |
Damping Ratio: | 0.2m (standard), 0.24m (/LV) |
Recovery Distance: | 0.51m (standard), 0.54m (/LV) |
Damped Natural Wavelength: | 3.4m (standard), 3.6m (/LV) |
Repeatability: | +/- 0.5 ° if vane removed and replaced (note: no measurable backlash movement during use) |
Life of Potentiometer: | 5x107 cycles (10 years typical exposure) |
Service Interval: | 4 to 5 years |
Accuracy: | +/-3° in steady winds over 5m/s (6m/s /WR, 3.5m/s /LV), with +/-2° obtainable following calibration. |
Maximum Wind Speed: | over 75 m/s (standard), over 60m/s (/LV) |
Range: | 360° mechanical angle, continuous rotation allowed |
Temperature Range: | -50 to +70 °C |
Potentiometer Resistance: | 1000 Ohms (+/- 10%) |
Wiper Current: | 50uA recommended (20mA absolute maximum) |
Potentiometer Voltage: | 1V to 5V (recommended), 20V absolute maximum. |
Potentiometer Continuity Angle: | 357.7 +/- 1.5° (2.3° gap at north) |
Potentiometer Variation Angle: | 356.5 +/-1.5° (3.5° dead-band) |
Potentiometer Resolution: | +/-0.2° |
Potentiometer Independent Non-Linearity: | +/-0.25° (unloaded) |
Connections: | 6 wire screened cable. Screen insulated at instrument end, black connects to body. Red & White connect to 360° end and Blue & Yellow connect to 0° end of pot. Green connects to wiper. |
Fin (Vane-Arm): | type F20 as standard. |
Dimensions: | This instrument is constructed using our standard fin and windvane body design anddimensions. |
Wiring/Connections (Cable colours): | For wiring details click HERE |
Cable: | 3m (9ft10in) permanently attached 6-conductor* cable with braided shield/screen as standard. Longer lengths are available to order (up to 115m). Spec: Def Stan 61-12 part 4, 0.22mm2(~24AWG). *Note: 8-conductor used for /HE4 models. |
Calibration Certificate(optional extra): | The W200P windvane is available with anIEC/MEASNET Calibration Certificate(for an additional charge) |
風向傳感器 | W200P/L |
啟動風速 | 0.5m/s(標準)0.6m/s(WR型)0.35m/s(LV型) |
風速 | >75m/s(標準)>60m/s(LV型) |
測量范圍 | 機械角度360度,允許連續轉動 |
精度 | ±4度風速穩定在3m/s時(3.5m/s/WR型,2m/s/LV型) |
分辨率 | ±0.2度 |
重復性 | ±0.5度 |
線性 | 滿刻度輸出的0.5% |
溫度范圍 | -30℃~+70℃ |
連續電角度 | 357°±2°(正北方3°缺口) |
變化電角度 | 355°±3°(5°盲區) |
電位器消耗電流 | 20mA |
典型壽命 | 5×107轉(10年) |
絕緣電阻 | 最小50MΩ |
電位計阻抗 | 1kΩ±10% |
供電電壓 | 20V |
W200P/l | |
Threshold: | 0.5m/s (standard), 0.6m/s (/WR), 0.35m/s (/LV) |
Distance Constant: | 2.3m (standard), 2.4m (/LV) |
Damping Ratio: | 0.2m (standard), 0.24m (/LV) |
Recovery Distance: | 0.51m (standard), 0.54m (/LV) |
Damped Natural Wavelength: | 3.4m (standard), 3.6m (/LV) |
Repeatability: | +/- 0.5 ° if vane removed and replaced (note: no measurable backlash movement during use) |
Life of Potentiometer: | 2x107 cycles (4 years typical exposure) |
Service Interval: | 2 to 3 years |
Accuracy: | +/-4° in steady winds over 3m/s (3.5m/s /WR, 2m/s /LV). |
Maximum Wind Speed: | over 75 m/s (standard), over 60m/s (/LV) |
Range: | 360° mechanical angle, continuous rotation allowed |
Temperature Range: | -30 to +70 °C |
Potentiometer Resistance: | 2000 Ohms (+/- 3%) |
Wiper Current: | 50uA recommended (10mA absolute maximum) |
Potentiometer Voltage: | 1V to 5V (recommended), 20V absolute maximum. |
PotentiometerContinuity Angle: | 357 +/- 2° (typically 3° gap at north) |
Potentiometer Variation Angle: | 355 +/-3° (typically 5° dead-band) |
Potentiometer Resolution: | +/-0.25° |
Potentiometer Independent Non-Linearity:: | +/-0.5% (unloaded) |
Connections: | 6 wire screened cable. Screen insulated at instrument end, black connects to body. Red & White connect to 360° end and Blue & Yellow connect to 0° end of pot. Green connects to wiper. |
Fin (Vane-Arm): | type F20 as standard. |
Dimensions: | This instrument is constructed using our standard fin and windvane body design and dimensions. |
Wiring/Connections (Cable colours): | For wiring details click HERE |
Cable: | 3m (9ft10in) permanently attached 6-conductor* cable with braided shield/screen as standard. Longer lengths are available to order (up to 115m). Spec: Def Stan 61-12 part 4, 0.22mm2(~24AWG). *Note: 8-conductor used for /HE4 models. |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
北京博倫經緯科技發展有限公司