污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
營派閥門（上海）有限公司
會員1.png)
營派閥門（上海）有限公司
| 參 考 價 | 面議 |
產品型號KAYSEN
品 牌
廠商性質0
所 在 地上海市
聯系方式：呂鋒查看聯系方式
更新時間：2017-07-25 15:21:26瀏覽次數：730次
聯系我時，請告知來自 環保在線進口高壓柱塞泵,德國凱森進口柱塞泵
●效率高
●耐壓高
●壽命長
●傳輸功率大
●轉速范圍寬
●有良好的自吸性能
進口高壓柱塞泵,德國凱森進口柱塞泵
KS.High pressure piston pump
德國KAYSEN凱森進口高壓柱塞泵
Overview of High Pressure Piston Pumps
高壓柱塞泵的使用壓力一般應在10MPa～100MPa之間。它屬于容積式泵，借助工作腔里的容積周期性變化來達到輸送液體的目的；原動機的機械能經泵直接轉化為輸送液體的壓力能；泵的容量只取決于工作腔容積變化值及其在單位時間內的變化次數，理論上與排出壓力無關。往復泵是借助于活塞在液缸工作腔內的往復運動（或通過隔膜、波紋管等撓性元件在工作腔內的周期性彈性變形）來使工作腔容積產生周期性變化的。在結構上，往復泵的工作腔是借助密封裝置與外界隔開，通過泵閥（吸入閥和排出閥）與管路溝通或閉合。
主要特點：KS.Features
●瞬時流量是脈動的
這是因?yàn)樵谥弥?，液體介質的吸入和排出過程是交替進行的，而且活塞在位移過程中，其速度又在不斷地變化之中。在只有一個工作腔的泵中，泵的瞬時流量不僅隨時間而變化，而且是不連續的。隨著工作腔的增多，瞬時流量的脈動幅度越來越小，乃至在實用上可以認為是紊流。
●平均流量是恒定的
理論上，泵的流量只取決于泵的主要結構參數 n（每分鐘往復次數）、S（活塞行程）、D（活塞直徑）、Z（活塞數目），與排出壓力無關，且與輸送介質的溫度、粘度等物理、化學性質無關。所以說泵的流量是恒定的。
●泵的壓力取決于管道特性
柱塞泵的排出壓力不能由泵本身限定，而是取決于泵裝置的管道特性，并且與流量無關。也就是說，如果認為輸送液體是不可壓縮的，那么，在理論上可認為往復泵的排出壓力將不受任何限制，即可根據泵裝置的管道特性，建立泵的任何所需的排出壓力。當然，所有往復泵都有一個泵的排出壓力的規定，這不是說該泵的排出壓力不會再升高，而只是說，由于原動機額定功率和泵本身的結構強度的限制，不允許在超出這一排出壓力下使用而己。
●對輸送介質有較強的適應性
柱塞泵原則上可以輸送任何介質，幾乎不受介質的物理性能和化學性能的限制。當然，由于液力端的材料和制造工藝以及密封技術的限制，有時也會遇到不能適應的情況。
●有良好的自吸性能
柱塞泵不僅有良好的吸入性能，而且還有良好的自吸性能。因此，對多數往復泵來說，在啟動前通常不需灌泵。 機器效率高，節能。
主要優點：KS.advantage
●效率高
●耐壓高
●壽命長
●傳輸功率大
●轉速范圍寬
●有良好的自吸性能
主要應用：KS.application
●重型刨床
●液壓機
●工程機械
●船舶
●礦山冶金機械
●能源礦山開采
●石油精細化工
●食品藥品加工
Germany KAYSEN imported high pressure piston pump overview
The pressure of the high-pressure piston pump should generally be between 10MPa and 100MPa. It belongs to the positive displacement pump, with the working chamber in the volume of cyclical changes to achieve the purpose of transporting the liquid; the original machine mechanical energy pump directly into the transmission of liquid pressure energy; pump capacity depends only on the working chamber volume changes and its The number of changes in unit time is theoretically independent of discharge pressure. The reciprocating pump causes the working chamber volume to periodically change by means of the reciprocating motion of the piston in the cylinder operating chamber (or by periodic elastic deformation of the flexible element such as a diaphragm, bellows or the like in the working chamber). In the structure, the reciprocating pump working chamber is separated from the outside by means of a sealing device, through the valve (suction valve and discharge valve) to communicate with the pipeline or closed.
main feature:
● Instantaneous flow is pulsating
This is because in the plunger pump, the liquid medium inhalation and discharge process is alternating, and the piston in the displacement process, the speed is constantly changing. In a pump with only one working chamber, the instantaneous flow of the pump varies not only with time but also in a discontinuous manner. With the increase in the working chamber, the instantaneous flow rate of the pulse is getting smaller and smaller, and even in practice can be considered turbulent.
● The average flow rate is constant
In theory, the flow of the pump depends only on the main structural parameters n (reciprocating times per minute), S (piston stroke), D (piston diameter), Z (number of pistons), regardless of discharge pressure, Temperature, viscosity and other physical and chemical properties have nothing to do. So the flow of the pump is constant.
● The pressure of the pump depends on the pipe characteristics
The discharge pressure of the plunger pump can not be limited by the pump itself, but depends on the piping characteristics of the pump device and is independent of the flow rate. That is, if it is considered that the delivery liquid is incompressible, it is theoretically believed that the discharge pressure of the reciprocating pump will be free from any restriction and any desired discharge pressure of the pump may be established in accordance with the pipe characteristics of the pump unit. Of course, all reciprocating pumps have a pump discharge pressure requirement, which is not to say that the pump's discharge pressure will not rise again, but only that, due to the prime mover rated power and the structural strength of the pump itself is not allowed Beyond the use of this discharge pressure.
● Strong adaptability to the conveying medium
Piston pumps can in principle deliver any medium, almost free of physical and chemical properties of the media. Of course, due to the hydraulic end of the material and manufacturing process and sealing technology constraints, and sometimes can not meet the situation.
● have good self-priming performance
Piston pump not only has good inhalation performance, but also good self-priming performance. Therefore, for most reciprocating pumps, there is usually no need to pump before starting. Machine efficiency is high, energy saving.
Key Benefits:
● High efficiency
● High pressure
● long life
● Transmission power is large
● Wide speed range
● have good self-priming performance
main application:
● heavy planer
● hydraulic press
● Construction machinery
● ship
Mine Metallurgical Machinery
Energy mine mining
● petroleum fine chemical industry
● Food and drug processing
德國KAYSEN凱森生產車間
Production workshop
德國KAYSEN凱森水泵檢查
KS.ump check
歡迎來到Kaysen凱森泵。
品質，創新，實力，可靠性。
是凱森的基本特征。
我們認為，作為一個家庭是正確的方式來處理我們的業務。
當有人選擇Kaysen是因?yàn)樾湃魏涂煽啃浴?/span>
我們每天在我們的gemba kaizen工作，以達到的定制水平和客戶滿意度。
我們致力于技術開發，走在前列，適用各項規定。
我們?cè)谝苿?dòng)時研究水流動路線和鳥類飛行，以了解自然如何教導我們節約能源。
我們?cè)诘聡?guó)的工廠生產，庫存和快速交貨都是Kaysen凱森泵標準，使我們與其他泵制造商不同。
隨著產品創新的廣泛選擇，Kaysen凱森泵承諾，使其渠道合作伙伴更具競爭力和更成功。
Kysen凱森泵專業的技術為工業泵制造商感到自豪。
Welcome to Kaysen Pump.
Quality, innovation, strength, reliability.
Is the basic characteristics of Kaysen
We believe that as a family is the right way to deal with our global business.
When someone chooses Kaysen because of trust and reliability.
We work every day at our gemba kaizen to achieve extreme customization and customer satisfaction.
We are committed to technology development, walk in the forefront, apply the provisions.
We study water flow routes and birds when moving to learn how nature teaches us to conserve energy.
Our factory production, inventory and quick delivery in our German are Kaysen Pumps standard, making us different from other pump manufacturers.
With the wide selection of product innovation, Kaysen Pumps promises to make its channel partners more competitive and more successful.
Kysen Pumps Professional Technology is proud of industrial pump manufacturers.
進口高壓柱塞泵,德國凱森進口柱塞泵
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
