丹富斯ZCS水用電磁閥產品概述          丹富斯電磁閥/電磁閥作用
本系列電磁閥適用于以水或液體、氣體為介質， 進入液位、濃度、流量、計量或排放循環等自動控制的二位式通斷切換二口二位式常閉或常開式。 
結構特點
電磁先導膜片式操作結構
閥門流量比普通閥提高10%
采用特殊密封結構和特種密封材料無泄漏
壽命長是同類產品的5倍以上
工作平穩噪音低、無水錘沖擊、無顫抖聲
采用膜片式、對介質潔凈度要求較低
不銹鋼可動鐵芯經久耐用，反應快速；
配管方式可任意角度安裝,為增強壽命是水平管線圈朝上
防爆線圈符合T4,T5和測CE的標準（德國NASS線圈）
引用標準：GB3836•9 防爆標志 Exm I/IIT4(國產線圈)

結構原理             丹富斯電磁閥/電磁閥作用
本閥通徑15～100為膜片式為二次開閥的先導式電磁閥，通徑125～300為三次開閥的先導式電磁閥，其結構主要由副閥和主閥組成。根據斷電時所處開關狀態的不同，可分為常閉電磁閥和常開電磁閥。常閉電磁閥，常位時，活動鐵芯封住副閥口，閥腔內壓力平衡，副閥、主閥口封閉。當線圈通電，產生電磁力：將活動鐵芯吸上，副閥打開，主閥腔內的介質自導閥門外世，以致主閥閥杯上下產生壓力差，膜片或閥杯被迅速托起主閥口開啟，閥呈通路狀態。
當線圈斷電，磁場消失，活動鐵芯復位，封閉副閥口，繼而副閥和主閥閥杯內壓力上升，主閥閥杯壓向閥座，閥又呈關閉狀態。
常開電磁閥，當線圈通電時，產生磁力，銜鐵在磁力作用下下移，推動副閥閥杯下移，副閥關閉，隨著主閥閥杯上下壓差趨向相等，主閥閥杯由自重壓向密封面，閥門關閉。當線圈斷電后，磁力為零，銜鐵祁副閥閥杯由于彈簧作用上升，副閥打開，主閥閥杯內介質經副閥流走，壓力下降，當壓力降到一定值后，主閥閥杯由上下壓差作用向上升起，主閥打開，閥門開啟。   

Dan fuss with ZCS water electromagnetic valve product overview 
This series solenoid valves used in water or liquid and gas as medium, into, concentration, flow, liquid level measurement and discharge loop automatic control of two type switch on and off two mouth two type normally closed or open. 
Structural characteristics of 
Electromagnetic pilot diaphragm structure operation 
10% higher than that of ordinary valve valve flow 
The use of special sealing structure and special sealing material without leakage 
Long life is 5 times more than similar products 
Steady low noise, no water hammer shock, trembling voice 
The diaphragm type, low to medium cleanliness requirement 
Stainless steel moving iron core is durable, quick response; 
Piping installation way can be arbitrary Angle, to enhance the best life is horizontal pipeline ring up 
Explosion-proof coil in T4 and T5 of the CE and test standard NASS coil (Germany) 
Reference: GB3836 • 9 explosion-proof marks Exm I/IIT4 (coil) 
 
Structure principle 
This valve size 15 ~ 100 for diaphragm for secondary open valve guiding type solenoid valve, size of 125 ~ 300 for three open valve guiding type solenoid valve and its structure is mainly composed of pair of valve and main valve. Depending on the power of switch state, can be divided into the normally closed solenoid valve solenoid valve and it always open. Normally closed electromagnetic valves, and often, activity core sealed vice valve mouth, cavity pressure balance, the deputy valve, main valve closed. Electricity, when the winding electromagnetic force: the core activity on the absorption, vice valve is opened, the main valve cavity medium homing valve outside the world, so that the main valve cup of fluctuation pressure difference, diaphragm valve or cup was quickly in order to the main valve mouth open, valve distribution state. 
Disappear, when the coil power, magnetic activity core reset, the deputy valve closed mouth, then vice valve and pressure rise within the main valve cup, the main valve cup pressure to the valve seat, valve is closed. 
Normally open solenoid valve, when the coil electricity, magnetic, armature down, under the action of a magnetic drive vice valve cup down, the deputy valve closed, as the main valve cup of fluctuation pressure differential approach parity, the main valve cup by the pressure to the sealing surface, the valve closed. After the power coil, magnetic force is zero, armature qi vice valve cup due to the increasing spring action, the deputy valve is opened, the main valve cup in the medium run by the deputy valve, pressure drop, when pressure is below a certain value, the main valve cup by the pressure differential action rises up and down, open the main valve, the valve opens. 

技術參數