丹富斯自力式壓差控制閥產品說明：

自力式壓差控制閥，亦稱壓差平衡閥、壓差調節閥、壓差閥、流量壓差平衡閥。DFZYC-16型自力式壓差控制閥，不需外來能源，依靠被調介質自身壓力變化進行自動調節，自動消除管網的剩余壓頭及壓力波動引起的流量變化，恒定用戶進出口壓差，有助于穩定系統運行。

丹富斯自力式壓控制閥性能特點：

該閥為雙閥瓣結構，閥桿不平衡力小，結構緊湊，用于供熱（空調）水系列中，恒定被控制系統的壓差，并有以下的特點：

1、恒定被控制系統壓差；

2、支持被控系統內部自主調節；

3、吸收外網壓差波動；

4、采用*的無級調壓結構，控制壓差可調比可達25：1；

5、具備自動消除堵塞功能;

6、法蘭尺寸符合GB4216.2中灰鑄鐵法蘭尺寸。

丹富斯自力式壓差平衡控制閥使用方法：

1、介質流動方向應與閥體箭頭方向*；

2、自力式壓差控制閥應安裝在回水管上，閥上接導壓管，導壓管的另一端與供水管連接，建議在導壓管供水端安裝1/2"球閥，以便啟動消除堵塞功能；

3、在導壓管前的供水管上應安裝過濾網，避免水質太差造成該閥失去自動調節功能；

4、供水管和該閥前的回水管應分別裝設壓力表，便于調節控制壓差;

5、如發現該系統流量過大或過小，可能的原因是管道元件安裝時的雜物卡阻在閥塞上，可將1/2"球閥關閉3—5分鐘，這時如果是較輕堵塞，即可自動消除，如還不能消除，則要拆開閥門檢查消除堵塞物；

6、控制壓差調節方法：逆時針方向調節調壓閥桿，觀察壓差。

Dan fuss self-reliance type differential pressure control valve product description:

Self-reliance type differential pressure control valve, also known as differential pressure balancing valve and differential pressure regulating valve, differential pressure valve, flow valve differential pressure balance. DFZYC - 16 self-reliance type differential pressure control valve, without external energy, relying on the modulated medium pressure changes automatically adjust itself, automatic eliminate the residual pressure head and pipe network pressure fluctuation caused by the flow of change, constant user import and export pressure difference, help stabilize the system.

Dan fuss self-reliance type pressure control valve performance characteristics:

The valve for double disc structure, stem unbalanced force is small, compact structure, used for water heating (air conditioning) series, constant differential pressure of the control system, and has the following features:

1, the constant pressure difference control system;

2, support controlled system internal autonomic regulation;

3 differential pressure fluctuation, absorb the network;

4, the use of advanced stepless regulating structure, general control pressure adjustable ratio of 25:1;

5, have automatic eliminate congestion function;

6, flange size with GB4216.2 gray cast iron flanges in size.

Dan fuss self-reliance type differential pressure balance valve method of use:

1, the medium flow direction should be consistent with body direction arrow;

2, self-reliance type differential pressure control valve should be installed on the return pipe, valve guide pressure tube, on the other end of the guide pipe connected to the water supply pipe, it is recommended to guide pipe water supply side install 1/2 "ball valve, in order to start the eliminate congestion function;

3, in the guide tube on the water supply pipe should be installed in front of the screen pack, avoid the valve loses its ability to automatically adjust the poor water quality;

4, water supply and return pipe before the valve should be installed pressure gauge, facilitate adjustment control pressure difference;

5, if discover the system flow is too big or too small, the possible reasons is piping components installed with sundry jam in the valve plug, can be 1/2 "ball valve closed 3-5 minutes, then if it is a lighter plug, can be automatically eliminated, if can't eliminate, to open check valves eliminate the clog;

6, control differential pressure regulating methods: regulate the regulating stem counterclockwise, observe differential pressure.