當前位置：君達儀器儀表（北京）有限公司>>無損檢測儀>>探傷儀>>磁粉探傷儀

磁粉探傷儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號DA400S

品牌

廠商性質經銷商

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：路通查看聯系方式

更新時間：2022-08-03 13:42:16瀏覽次數：407次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  無損檢測儀

硬度計

粗糙度儀

超聲波測厚儀

涂層測厚儀

測振儀

推拉力計

探傷儀

扭矩儀

全部產品列表

暫無信息

君達儀器儀表（北京）有限公司

經營模式：經銷商

商鋪產品：259條

所在地區：北京

聯系人：路通（經理）

詢價 給他留言

產品簡介

美國派克便攜式DA400S磁粉探傷儀

詳細介紹

美國派克便攜式DA400S磁粉探傷儀：
美國PARKER公司磁粉探傷儀DA-400采用了許多*技術來形成感應磁場，具有*通用性，固定的AC或DC磁場，用于表面和近表面缺陷的檢測，是控制器與固態電子器件為一體的高性能的輕便儀?？绅岣吣艽艌黾惺┘拥綑z測區，快速準確發現材料缺陷。磁極可將AC或DC磁場施加到各種形狀工件的檢測區域，沒有電弧燒傷。

DA400S的技術參數：

型號	DA400	DA400S
電源	110VAC 50-60Hz	230VAC 50-60Hz
電流	4A	3A
磁場	交流	交直流
工作周期	2分鐘開/關	2分鐘開/關
重量	3.68Kg	3.68Kg
尺寸	188＊235＊54mm	188＊235＊54mm
磁極間距	0-305mm	0-305mm
電纜	3芯2m長電纜	3芯2m長電纜

DA-400 Series Contour Probes^®

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective ACpulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defectsdemagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controlssolid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape... in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

Versatilitypowerful performance in a lightweight (8 lbs.) instrument
Constant AC or pulsed DC fields with the flip of a switch for the location of surfacesome sub-surface defects
Apply continuous or residual magnetic fieldsdemagnetize too
Use with dry powder, wet fluorescent or visible
High impact molded housing
One year repair/replacement guarantee

DA-400s Series Contour Probes^®SPECIFICATIONS

Electronics	Reliable solid state circuitry contained within molded housing
Mechanical capacity	Minimum-Maximum distance across poles: 0 to 12"(0-305mm)
Fields – selective	AC: constant level DC: pulsed DC Flux density approximay 68,000 lines per square inch at 4" pole spacing. (50 pound pull.)
Power source	105-230 VAC, 50-60 Hz, 4 Amps 3-connector power cordplug. (Available in export voltages.)
Controls	1 Momentary, push to test 2 AC/DC selector switch
weight	3.4kg
Finish	Injection Molded Housing Glass Filled Nylon®