交聯聚乙烯絕緣控制電纜

生產范圍 Type and Description

交聯聚乙烯絕緣控制電纜結構示意圖

產品標準 Standard of Product
本產品按GB/T9330-2008國家標準生產，同時還可根據用戶需要按電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。 
The product is manufactured according to the standard of GB/T9330-2008.At the same time ,it can also be manufactured according to IEC, BS ,DIN and AEIC standard upon request.

適用范圍 Application
本產品適用于交流額定電壓450/750V及以下控制、監控回路及保護線路.
The product is suitable for controlling ，monitoring and protecting circuit with the rated voltage up to and including 450/750V. 

使用特性 Operating characteristics
額定電壓U0/U為450/750V。 
Rated voltage U0/U is 450/750V
電纜導體允許的長期工作溫度為90℃。 
The permissible continuous operating temperature of conductor is 90℃
電纜的敷設溫度應不低于0℃。 
導體短路時zui高溫度不得超過250℃，短路zui長持續時間不超過5秒。 
Max temperature of conductor during short circuit(5s maximum duration) shall not exceed 250℃
The ambient temperature under installation should not below 0℃ 

推薦的允許彎曲半徑 
The bending radius of cable is recommended as follow:
銅帶屏蔽結構的電纜，應小于電纜外徑的12倍； 
The bending radius of cable with cooper tape screen should be not less than 12 times of cable’s
有屏蔽層結構的軟電纜，應不小于電纜外徑的6倍。 
The bending radius of flexible cable with screen should be not less than 6 times of cable’s OD
敷設不受水平落差的限制
The installation is not limited to the horizontal dropping variance.

生產廠家