激情综合啪啪6月丁香,久久久久国产精品91福利,99精品日韩欧美在线观看,91成人午夜福利在线观看国产

Burster 8416-5500 傳感器
意大利BERARMA 02-PVS-2-50 泵 
意大利BERARMA 02-PVS-3-63 泵 
意大利BERARMA 02-PVS-3-80 泵

Burster  8416-5500 傳感器
意大利BERARMA     02-PVS-2-50 泵    
意大利BERARMA     02-PVS-3-63 泵    
意大利BERARMA     02-PVS-3-80 泵    The D-LE 603 flame sensor is available with different
photo elements for maximum selectivity
when using various fuels.
FeaturesBurster  8416-5500 傳感器
 Self-monitoring and fail-safe in conjunction
with a control unit/burner control
 Flame sensors for every spectral range from
UV to IR
 Connection to the D-UG 120 control unit, DUG
660 control unit as well as to the D-GF 150
burner control
 Uniform output signal thus mutually interchangeable
 Adjustable to different combustion technologies
such as exhaust gas recirculation
 Compliance to general safety regulations
 ATEX approved (D-LE 603 /94 Ex for zone 1
and D-LE 603/97 Ex for zone 2).
Applications
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 APAVE
 UL 372
 FM Class 7610
 AGA: AG 210
 GOST-R
 PTB (ATEX).
D-LE 603
8
AccessoriesBurster  8416-5500 傳感器
 Digital display for measuring the pulse rate
and its extreme values
(D-ZS 087-20)
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Terminal box for connecting flame sensor
(D-ZS 140)
 Installation flange for D-LL 702 for fibre
 optic system (D-ZS 702)
 Welding flange for D-LL 702 for fibre optic
system (D-ZS 704).
Functional description
The fibre optic system may be integrated directly
into the hot area of the burner. It transfers the
radiation from the flame over a fibre optic bundle
to the flame sensor installed outside the
burner. It is available inj different lengths.
The photo element in the flame sensor generates
a signal which is proportional to the flame
radiation intensity. The output signal of the
flame sensor is used as an input signal to a control
unit or a burner control.
Flame sensor with
fibre optic system
Systems for flame monitoring:
D-LE 701 flame sensor with
- flexible fibre optic system D-LL 701
- rigid fibre optic system D-LL 702
D-LE 703 flame sensor with
- flexible fibre optic system D-LL 703
- rigid fibre optic system D-LL 70Burster  8416-5500 傳感器4.
D-LE 701 flame sensor D-LE 703 flame sensor
Operation mode
Intermittent operation, continuous
operation and 72-hour operation
without permanent supervision
Operation mode
Intermittent operation, continuous
operation and 72-hour operation
without permanant supervision
Safety
Self-monitoring and fail-safe in
conjunction with a control
unit/burner control
Safety Self-monitoring and fail-safe
Protection
with cable gland
(D-LE 701…-CG) IP65,
with axial plug
(D-LE 701…-P) IP67
Protection
with cable gland
(D-LE 603…-CG) IP65,
with axial plug
(D-LE 603…-P) IP67
Gain four settings Gain four settings
High-pass filter three settings High-pass filter three settings
Spectral ranges UV, VIS, IR Spectral ranges UV, VIS, IR
Perm. ambient
temperature -20…+60°C Perm. ambient
temperature -20…+60°C
Dimensions
Weight
160x185x100 mm (HxD)
approx. 1.2 kg
Dimensions
Weight
90x92 mm, length approx. 270 mm
approx 1.2 kg
Features of the flame sensor
 Self-monitoring and fail-safe flame sensor
with a fibre-optic connection in conjunction
with a control unit/burner control
 Monitoring of gas, oil and coal flames
 Connection to the D-UG 120, D-UG 660 control
unit and the D-GF 150 burner control
 Spectral range from UV to IR
 Uniform output signal thus mutually interchangeable
 Adjustable to different combustion technologies
such as exhaust gas recirculation.
Applications
 Burners with difficult installation conditions
for conventional flame sensors or on those
whose environmental temperature near the
sighting tube is too high
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 GOST-R.
Flame sensor
Suitable for fuels
Features
Gas Oil Coal Wood
D-LE 701 / 703 UAF o ++ with intensive ambient light (neighbouring burners), gain switchover
D-LE 701 / 703 UA + ++ + with low NOx component, gain switchover
D-LE 701 / 703 IS ! + ++ + selective single burner monitoring (coal, oil)
D-LE 701 IGA / 703 IG o + ++ ++ selective single burner monitoring (coal, oil, wood)
++ ideally suited + well suited o conditionally suited ! not permitted (from experience)
Flame sensor selection
Flame sensor
D-LE 701
Flame sensor
D-LE 703
D-LE 701 D-LE 703
9
Flame sensor
Suitable for fuels
Features
Gas Oil Coal Wood
D-LX 700 UAF o ++ with intensive ambient light (neighbouring burners), gain switchover
D-LX 700 UA + ++ + with low NOx component, gain switchover
D-LX 700 IS ! + ++ + selective single burner monitoring (coal, oil)
D-LX 700 IG o + ++ ++ selective single burner monitoring (coal, oil, wood)
++ ideally suited + well suited o conditionally suited ! not permitted (from experience)
Flame monitor selection
Flame sensor
D-LE 700
Compact flame
monitor with fibre
optic system
Application with
- flexible fibre optic system
(D-LL 703)
- or rigid fibre optic system
(D-LL 704)
Features
 Suitable for continuous operation and 72-
hour operation according to TRD 604
 Compact design, flame sensor and control
unit in one enclosure, takes up no space in
control cabinet
 LED display for settings and operational
 status
 Self-monitoring and fail-safe compact flame
monitor for the monitoring of gas, oil and
coal flames with integrated UV, VIS or IR flame
sensor, primarily in single burner furnaces.
Applications
 Burners with difficult installation conditions
for conventional flame sensors or on those
whose environmental temperature near the
sighting tube is too high
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Operational mode
Intermittent operation, continuous
operation, 72-hour operation
without permanent supervision
Spectral ranges UV, VIS, IR
Safety Self-monitoring and fail-safe Viewing angle 6°
Auxiliary supply 24 VDC Number of ranges 1
Protection class IP67
Switching threshold 09
Display LED display
Flame relay 1x NO contact, 230 VAC, 2 A Flame intensity 0/420 mA
Status relay 1x NO contact, 230 VAC, 2 A Perm. ambient
temperature -20+60°C
Safety time 1, 3, 5 s Dimensions /
Weight
90 x 92 mm, length approx.
350 mm / approx. 1.8 kg
Accessories
 Digital display for optimal adjustment of the
flame sensors by measuring the pulse rate
and its extreme values (D-ZS 087 - 20)
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Terminal box for connecting the flame monitor
(D-ZS 140 / 141)
 Installation flange for D-LL 703 for fibre
 optic system (D-ZS 703)
 Welding flange for D-LL 704 for fibre optic
system (D-ZS 704).
Functional description
The D-LX 700 flame monitor analyses flame radiation
using the integrated flame sensor signal.
The flame intensity is present as a current at one
output 0/420mA for further analysis.
The D-LL 703 and D-LL 704 fibre optic system
may be integrated directly into the hot area of
the burner. It transfers the radiation from the
flame over a fibre optic bundle to the flame sensor
installed outside the burner.
Design
 Integrated compact device.
D-LX 700
10
D-LX 720
D-LX 720
Compact flame
monitor with fibre
optic system
Application with
- flexible fibre optic system
D-LL 703
- or rigid fibre optic system
D-LL 704.
Features
 Wide sensitivity range
 For ambient temperatures from -40°C up to
+85°C
 Dual channel design throughout
 Measurement of flame flicker frequency
 Selective to individual burners and fuels.
Applications
 Burners with difficult installation conditions
for conventional flame sensors or on those
whose ambient temperature near the sighting
tube is too high
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 SIL3.
Accessories
 LED bar graph display for the flame intensity
(D-ZS 129)
 Terminal box for connecting the flame monitor
(D-ZS 140-12)
 Installation flange for D-LL 703 fibre optic
system (D-ZS 703)
 Welding flange for D-LL 704 fibre optic system
(D-ZS 704)
 Power supply unit for supply of up to two
D-LX 720 (D-NG 24/05).
SIL 3
Operational mode Intermittent operation and
continuous operation Ranges 2
Safety Self-monitoring and fail-safe Communication LED display, Modbus RTU, IrDA
Auxiliary supply 24 VDC Flame intensity 0/420 mA
Protection class IP65 Ambient
temperature range -40+85°C
Flame relay 1x NO contact, 24 VDC, 0.5 A Dimensions
Weight
85x85 mm, length approx. 175 mm
approx. 1.25 kg
Status relay 1x NO contact, 24 VDC, 0.5 A Spectral ranges UV, IR
Safety time 1, 2, 3, 5 s Threshold switches Flame intensity and flicker
frequency
Viewing angle 6°
User interface of the flame monitor software
Functional description
The D-LX 720 compact flame monitor analyses
flame radiation using the integrated flame sensor
signal.
The flame intensity is available as current output
0/420 mA for further analysis.
Flame properties and parameters of the flame
monitor can be transmitted to a PC or PDA via a
RS485 and an IrDA interface.
Design
 Integrated compact device.
11
Fibre optics system
The D-LL 701, 702, 703 and 704
 fibre optic systems may be integrated
directly into the hot area of the
burner. It transfers the radiation
from the flame over a fibre optic
 bundle to the flame sensor installed
outside the burner.
D-LL 701 fibre optic system
 Flexible fibre optic system
 Separate design, flame sensor and fibre optic
system are connected by a fibre optic bundle
protected by a conduit system
 Suitable for temperatures up to 350°C.
D-LL 701: flexible fibre optic system for D-LE 701
Spectral ranges UV, IR Purge air
connection G ?“
Viewing angle 6° Intermediate pipe
material 1.4301
Perm. ambient
temperature -40…+350°C (optical System) Weight approx. 1.6 kg/m + 1 kg/m
D-LL 702 fibre optic system
 Rigid fibre optic system
 Separate design, flame sensor and fibre optic
system are connected by a fibre optic bundle
protected by a conduit system
Suitable for temperatures up to 350°C. D-LL 702: rigid fibre optic system for D-LE 701
Spectral ranges UV, IR Purge air
connection G ?“
Viewing angle 6° Intermediate pipe
material 1.4301
Perm. ambient
temperature -40…+350°C (optical System) Weight approx. 1.6 kg/m + 1 kg/m
Length over everything max. 20m
Length over everything max. 20m
Protection hose
min. 0.5 m
Protection hose
min. 0.5 m
Guide tubing
0.2 m
Length of flexible intermediate
pipe, min 0.5 m, max. 3 m
? 40 mm
? 22mm
? 40 mm
Length of rigid intermediate pipe
min 0.2 m, max. 15 m
Length of flexible intermediate
pipe, min 0.5 m, max. 3 m
Length of rigid intermediate pipe
min 0.2 m, max. 15 m D-LL 703 fibre optic system
 Flexible fibre optic system
 Combined design, fibre optic system and
flame sensor are directly connected
 Suitable for temperatures up to 350°C.
D-LL 703: flexible fibre optic system for D-LE 703 and D-LX 700
Spectral ranges UV, IR Cooling air
connection G ?“
Viewing angle 6° Guiding tube
material 1.4301
Perm. ambient
temperature -40…+350°C (optical System) Weight approx. 3 kg/m + 1 kg/m
Purge air
connection G ?“
D-LL 704: rigid fibre optic system for D-LE 703 and D-LX 700
Spectral ranges UV, IR Cooling air
connection G ?“
Viewing angle 6° Guiding tube
material 1.4301
Perm. ambient
temperature -40…+350°C (optical System) Weight approx. 2 kg/m + 1 kg/m
Purge air
connection G ?“
Length over everything max. 20m
D-LL 704 fibre optic system
 Rigid fibre optic system
 Suitable for temperatures up to 350°C.
Applications
 Tilting burner (flexible system)
 Burners with difficult installation conditions
for conventional flame sensors or on those
whose environmental temperature near the
sighting tube is too high
 Power stations
 Chemical industry, refineries
 Cement plants
 Waste incinerators
 Steam generators, heating plants.
Certifications
 GOST-R.
Length of intermediate
pipe, min 0.5 m, max. 20 m
Length over everything max. 20 ? 22 mm
12
Flame sensor
Flame sensor for the monitoring of
gas and oil flames, primarily in gas
turbines or in particularly harsh
 environments.
Features
 Optionally available with air/water cooling
 Deployable with high combustion chamber
overpressure
 High vibrational stability.
D-GT 800
 Conforms to general safety regulations
 Self-monitoring and fail-safe in conjunction
with a control unit/burner control
 Connection to the D-UG 120, D-UG 660 control
unit and the D-GF 150 burner control.
D-GT 810
 Analysis of the d.c light component of the
flame radiation
 Analysis with extremely fast reaction times
 Connection to any control unit with 2-wire
transmitter 420mA.
Applications
 Burners with difficult installation conditions
for conventional flame sensors or on those
whose environmental temperature near the
sighting tube is very high
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants
 Gas turbines.
Certifications (only D-GT 800)
 DVGW
 GOST-R
 PTB (ATEX).
Functional description
With its combination of highly sensitive photo
element and sturdy design, the D-GT 800/810
flame sensor is ideal for use in harsh environments
such as in gas turbines. The photodiode
used can detect almost all blue burning flames,
such as gas flames having only a low radiation
component in the visible range.
The D-GT 800/810 is available with different
photo element for optimal selectivity when using
different fuels.
Operational mode
D-GT 800
Intermittent operation, continuous
operation and 72-hour operation
without permanent supervision
Perm. ambient
temperature
Without cooling: 0…+120°C
Air cooling: -20…+200°C
Water cooling: -20…+300°C
Operational mode
D-GT 810
420 mA / 100 Ohm at 18 VDC
700 Ohm at 30 VDC Vibration 10 g
Safety
Self-monitoring and fail-safe in
conjunction with a control
unit/burner control
Dimensions ?100 mm; length approx. 190 mm
Schutzart
Mit Kabelverschraubung
(D-GT 800/810-P) IP67,
in Ex-Ausführung
(D-GT 800/810/Ex) IP66
Weight Without cooling: approx. 1.5 kg,
with cooling: approx. 2.0 kg
Ex-Schutz
(D-GT 800/810 Ex) II 2G Ex d T4/T5/T6
Max. combustion
chamber
overpressure
30 bar
Spectral range UV Sighting tube
connection ?“ NPT (F)
Viewing angle 6° Cooling connection ?“ NPT (F)
Models
 Cable connection (-Ex)
 Axial plug (-P).
Accessories
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Terminal box for connecting the flame
 sensor (D-ZS 140, D-ZS 141).
Control unit/
Burner control
D-UG 120,
D-UG 660,
D-GF 150
Direct
current output
420 mA
(without
certification)
D-GT 800 Ex
D-GT 810 Ex
Flame sensor
Suitable for
Features
Gas Oil
D-GT 800/810 UAF o ++ with intensive ambient light (neighbouring burners)
D-GT 800/810 UA + ++ at low NOx component
++ ideally suited + well suited o conditional suited ! not permitted (from experience)
Flame sensor selection
D-GT 800-P
13
Control unit
D-UG 120
Mains adapter
D-NG 24/05
(optional)
Flame sensor
e.g. D-LE 103
Purge air
flange
Thermal/
electrical
isolator
D-ZS 117 I
(optional)
Control unit
Self-monitoring and fail-safe control
unit for the monitoring of gas,
oil and coal flames with DURAG UV,
UV+IR or IR flame sensors, primarily
in single burner furnaces.
Features
 suitable for intermittent operation, continuous
operation and 72-hour operation according
to TRD 604
 LED display
 Installation on DIN-rail.
Applications
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 APAVE
 UL 372
 FM Class 7610
 GOST-R.
Accessories
 Power supply unit for connecting the
D-UG 120 to 230VAC (D-NG 24/05)
 Digital display for optimal adjustment of the
flame sensors by measuring the pulse rate
and its extreme values (D-ZS 087 - 20)
 Optical adjustment aid for the alignment of
the Swivel mount on the sighting tube
(D-ZS 118)
 UV-C test light source
230 V / 50 Hz (D-ZS 077-10)
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Swivel mount for alignment of flame monitor
to the flame to be monitored (D-ZS 033 - I)
 Thermal isolator with electrical insulation
(D-ZS 117 - I)
 Ball valve for closing sighting tube
(D-ZS 133 - I)
 Terminal box for connecting flame monitor
(D-ZS 140 / 141).
Functional description
The D-UG 120 control unit analyses the flame
 radiation via the signal of the flame sensor connected.
The easy-to-read LED display shows the operational
status of the flame monitor.
The flame intensity is present as a current at an
output 0/420 mA for further analysis.
Flame sensors
 D-LE 103 for standard applications
 D-LE 603 for selective flame monitoring
 D-LE 702/703 for special applications (fibre
optics)
 D-GT 800 for particularly harsh environments
 sensors for Ex-applications are also available
Design
 Enclosure for DIN-rail mounting.
ball valve
D-ZS 133 I
(optional)
Swivel mount
D-ZS-033 I
(optional)
Operation mode
Intermittent operation, continuous
operation, 72-hour operation
without permanent supervision
Configurable
switching
thresholds
1
Safety Self-monitoring and fail-safe Threshold setting 09
Power supply 24 VDC Flame sensor 1
Protection IP20 Display LED
Flame relay 1x NO contact, 230VAC, 2A Flame intensity 0/420 mA
Status relay 1x NO contact, 230VAC, 2A Perm. ambient
temperature -20+60°C
Installation TS 35 DIN-rail Dimensions 100 x 75 x 118 mm (HxD)
Safety time 1s Weight approx. 0.45 kg
Digital display D-ZS
087-20 (optional)
D-UG 120
14
Control unit
Self-monitoring and fail-safe control
unit for the monitoring of gas,
oil and coal flames with DURAG UV,
UV+IR or IR- flame sensors, primarily
in multiple-burner furnaces.
Features
 Suitable for intermittent operation, continuous
operation and 72-hour operation as per
TRD 604
 Optional parallel operation of two flame sensors
in any combination: UV/UV, UV/IR or IR/IR
 Three different settings supported for various
modes (e.g. dependent on fuel or combustion
technology), automatic activation by
burner management systemApplications
 Power stations
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 APAVE
 UL 372
 FM Class 7610
 AGA: AG 210
 GOST-R.
Accessories
 Digital display for optimal adjustment of the
flame sensors by measuring the pulse rate
and its extreme values (D-ZS 087 - 20)
 Optical adjustment aid for the alignment of
the Swivel mount on the sighting tube
(D-ZS 118)
 UV-C test light source
230 V / 50 Hz (D-ZS 077-10)
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Swivel mount for alignment of flame monitor
to the flame to be monitored (D-ZS 033 - I)
 Thermal isolator with electrical isolation
(D-ZS 117 - I)
 Ball valve for closing sighting tube
(D-ZS 133 - I)
 Terminal box for connecting flame monitor
(D-ZS 140 / 141)
 Various enclosures and racks for 1 to 4 devices.
Functional description
The D-UG 660 control unit analyses the flame
radiation via the pulse signal of the flame sensor
connected.
The easy-to-read LCD display continually shows
information on the defined setting and operational
status.
The flame intensity and signal are present at
two current outputs 0/420 mA for further
analysis.
Flame sensors
 D-LE 103 for standard applications
 D-LE 603 for selective flame monitoring
 D-LE 702/703 for special applications (fibre
optics)
 D-GT 800 for particularly harsh environments
 sensors for Ex-applications are also available.
Design
 Plug-in module (21HP and 3RU) for 19“ racks
(IP00).
Control unit D-UG 660
Digital display
D-ZS 087-20 (optional)
Swivel mount
D-ZS-033 I
(optional)
Flame sensor
e.g. D-LE 603
Purge air
flange
Second flame
sensor
(optional)
Thermal/
electrical
isolator
D-ZS 117 I
(optional)
Ball valve
D-ZS 133 I
(optional)
D-UG 660
Operation mode
Intermittent operation, continuous
operation, 72-hour operation
without continual supervision
Pre-configurable
combinations of
switching
threshold and
safety time
3
Safety Self-monitoring and fail-safe Flame sensor
connection 1 or 2 (parallel)
Power supply 24 VDC,
115/230 VAC Display alpha-numeric LCD display
Protection IP00 Flame intensity 0/420 mA
Flame relay 1x switch-over contact,
230 VAC, 2A Flame signal 0/420 mA
Status relay 1x switch-over contact,
230 VAC, 2A
Perm. ambient
temperature -20+60°C
Threshold setting 0099 Dimensions 19” plug-in module, 3 RU, 21 HP
Safety time 1  5,5s Weight approx. 1 kg 15
Operational mode
Intermittent operation, continuous
operation, 72-hour operation
without permanent supervision
Pre-purge 30 s…20 min
Safety Self-monitoring and fail-safe Flame sensor 1, 2 parallel or external flame
Mains voltage 115/230 VAC , 50 / 60 Hz Display LED
Protection IP20 Flame intensity 0/4…20 mA
Installation DIN-rail TS 35 Data output to D-AM 150 / D-ZS 087-20
Threshold setting 0…9 Dimensions
Weight
170 x 130 x 114 mm (LxH)
approx. 1.5 kg
Burner control
Self-monitoring and fail-safe burner
control for the control of gas and oil
burners as well as combined gas/oil
burners of any capacity.
Features
 Controling and monitoring of gas and oil
burners of any capacity.
 Suitable for intermittent operation, continuous
operation and 72-hour operation according
to TRD 604
 Integrated gas valve monitoring system
 Separate outputs for control of gas and oil fuel
valves
 Quick fuel change “on the fly” without burner
shut down
 Adjustable pre-purge timer
 Integrated flame monitor
 Input for external flame monitor
 Data interface.
Applications
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 UL 372
 FM Class 7610
 AGA: AG 210.
Additional equipment
 First out annunciator, plain text display,
fieldbus communication (D-AM 150)
 Digital display for optimal adjustment of the
flame sensors by measuring the pulse rate
and its extreme values
(D-ZS 087 - 20)
 Optical adjustment aid for the alignment of
the Swivel mount on the sighting tube
(D-ZS 118)
 UV-C test light source
230 V / 50 Hz (D-ZS 077-10)
 UV-A, UV-B and IR test light source
230 V/50 Hz (D-ZS 093)
 Swivel Mount for alignment of flame monitor
to the flame to be monitored
(D-ZS 033 - I)
 Thermal isolator with electrical insulation
(D-ZS 117 - I)
 Ball valve for closing sighting tube
(D-ZS 133 - I)
 Terminal box for connecting flame monitor
(D-ZS 140 / 141).
Functional description
Generally used fuel types and burners require
certain synchronised program cycles and safety
times for burner start-up
which are controlled and monitored electronically
with the burner control.
The following program cycles may be selected
on the D-GF 150 automatic firing device:
 Gas fuel with boiler pre-purge
 Gas fuel without boiler pre-purge
 Oil fuel with boiler pre-purge
 Oil fuel without boiler pre-purge.
Flame sensors
 D-LE 103 for standard applications
 D-LE 603 for selective flame monitoring
 D-LE 702/703 for special applications with fibre-optic
systems
 D-GT 800 for particularly harsh environments
 Flame sensor for use in potentially explosive
atmospheres are also available
Design
 Device installed on the TS 35 DIN-rail. Digital display
D-ZS 087-20 (optional)
Swivel mount
D-ZS-033 I
(optional)
Flame sensor
D-LE 603
Purge air
flange
Second flame sensor
(optional)
Thermal/
electrical
isolator
D-ZS 117 I
(optional)
Ball valve
D-ZS 133 I
(optional)
D-GF 150
Burner control D-GF 150
16
Display module
Extension module for the D-GF 150
automatic firing device with functions
ranging from first out annunciator
to plain text display up to
fieldbus communication.
Features
 Plain text for the burner control D-GF 150
 Initial value indicator with 24 inputs in three
groups
 Fault memory
 Text editor for plain text display
 Output relay for control via Fieldbus
 Operational hours counter
 Cycle counter
 Chip card for ease of programming
 Fieldbus communication (MODBUS-RTU) for
up to 32 devices.
Applications
(in conjunction with the D-GF 150 burner
 control)
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 UL 372.
Operational mode
Intermittent operation, continuous
operation, 72-hour operation
without permananent supervision
Installation DIN- rail TS 35
Safety First our annunciator: fail-safe
Dimensions
Weight
170 x 130 x 114 mm (LxH))
approx. 1.2 kg
Power supply 115/230 VAC , 50 / 60 Hz Display Alpha-numeric LCD display
Protection IP20 Data output Modbus RTU
Display module D-AM 150 Burner control D-GF 150
Flame sensor
D-LE 603
second
flame sensor
Functional description
The D-AM 150 display module upgrades the
burner control D-GF 150 with
 a plain text display (LCD) for showing the current
program cycle of the burner control as
well as the remaining run-time.
The supported user displays include:
- Flame signal
- Error message
- Operational hours of the burner
- Burner cycles
- Date and time
 A first out annunciator for the continuous
monitoring of all connected limiters and
monitor chains. Should the system be shut
down, the position in which chain in which
the shutdown is performed is stored.
 A MODBUS interface for outputting status
and process information for the burner and
D-GF 150 burner control.
Digital display
D-ZS 087-20
Design
Device for assembling onto TS 35 DIN-rail
Additional equipment
 Chip card for data storage
and parameterisation
(D-AM 150 CC).
D-AM 150
17
Burner control
Self-monitoring and fail-safe burner
control for the control of gas and oil
burners as well as combined gas/oil
burners of any capacity.
Features
 Controlling and monitoring of gas and oil
burners of any capacity.
 Suitable for intermittent operation (D-GF 55-
10) and continuous operation (D-GF 55-20)
 Integrated ionisation flame monitor
 Input for external flame monitor.
Applications
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants.
Certifications
 DVGW
 UL 372
 FM Class 7610.
Operational mode
D-GF 55-10:
Intermittent operation
D-GF 55-20: Intermittent operation
and continuous operation
Operational safety
time 1 s, 3 s or 5 s
Flame intensity 0…50 μA
Safety Self-monitoring and fail-safe Display LED
Power supply 115 / 230 VAC, 50 / 60 Hz Dimensions
Weight
100 x 75 x 118 mm (LxH)
approx. 0.7 kg
Protection IP20 Flame sensor D-LE 55 UL-CG
Perm. ambient
temperature -20…+60°C Spectral
sensitivity 190 – 270 nm
Flame sensor
- Ionisation electrode
- D-LE 55-UL-CG
- External flame monitor
Protection IP67
Perm. ambient
temperature -20…+60°C
Installation DIN-rail TS 35 Weight approx. 0.35 kg
Start-up safety
time 3 s, 5 s or 10 s Installation G 1“ or G ?“
Models
 D-GF 55-10
for intermittent operation
- Deployable with the D-LE 55 UL-CG UV
flame sensor or an ionisation electrode
- Connection for external flame monitors (for
continuous operation) e.g. DURAG D-LX 100
compact flame monitor or the combination
of D-UG 120 with a D-LE 103 flame sensor.
 D-GF 55-20
for continuous operation
- Operation with ionisation electrode
- Connection for external flame monitors (for
continuous operation) e.g. DURAG D-LX 100
compact flame monitor or the combination
of D-UG 120 with a D-LE 103 flame sensor.
Functional description
Generally used fuel types and burners require
certain synchronised program cycles and safety
margins for burner start-up which are controlled
and monitored electronically with the burner
control.
The burner control D-GF 55 controls
 The ignition of the burner
 The fuel valves
 Flame monitoring.
After the release of the ignition sequence, by a
thermostat for example, the device performs a
check of ambient light. If no flame is detected,
the ignition sequence starts. If no flame forms
during the ignition sequence, or if it goes out
whilst the burner is in operation, an interlock is
activated.
Design
 Enclosure for DIN-rail installation.
Ionisation electrode
(D-GF 55-10 and
D-GF 55-20)
D-GF 55-10 Burner control
Flame sensor
D-LE 55 UL-CG (only with D-GF 55-10)
D-GF 55-10
18
Electronic ignition
transformer
The D-HG 55 electronic ignition
transformer is suitable for the ignition
of gases and liquid fuels in
small burners.
Features
 Ignition of oil and gas
 High-performance and reliable ignition
 Simple to use and installation
 Robust enclosure for industrial use
 Maintenance-free because no wearing parts
 100 ignition sparks/second with a mains frequency
of 50Hz, 120 ignition sparks/second
with a mains frequency of 60Hz
 Suitable as “Ignitor Class 3 Special“ in accordance
with NFPA 8501 and NFPA 8502.
Anwendungen
 Chemical industry
 Refineries
 Cement plants
 Waste incineration
 Steam generators
 Heating plants.
Power supply 115 / 230 VAC, 50 / 60 Hz Perm. ambient
temperature -20 … +60°C
Power
consumption 15 VA Protection IP55
Ignition voltage 5000 V Dimensions 100 x 100 x 80 mm ((LxD)
(without ignition electrode)
Duty cycle 50% Weight approx. 0.7 kg
Models
 D-HG 55-10
Electronic ignition transformer for connection
to an external ignition electrode
 D-HG 55-11
Electronic ignition transformer for connection
to an external ignition electrode with the option
of connecting the electrode to an ionisation
flame monitor
 D-HG 55-20
Electronic ignition transformer with attached
ignition electrode
 D-HG 55-21
Electronic ignition transformer with attached
ignition electrode with the option of connecting
to an ionisation flame monitor.
Functional description
A high-voltage Capacitor is charged up in the
electronic ignition transformer. Once the required
energy level has been reached, a nonwearing
electronic switch (thyristor) triggers a
spark discharge at the ignition tip.
The D-HG 55-11 and -21 electronic ignition
transformers allow the use of the electrode as a
common ignition and ionisation electrode for
flame monitoring. The electrode is automatically
switched over after powering off the ignition.
The ionisation current may be tapped off at a
terminal. The DURAG D-IO 55 ionisation flame
monitor is suitable as a flame monitor.
Electronic
ignition transformer
D-HG 55-10
D-HG 55-11
Connection for
ionisation flame
monitor
(only D-HG 55-11)
Connection for
ionisation flame monitor (only D-HG 55-21)
Power supply
connection
Length 145 to 1104 mm Power supply ? 15mm connection
Ignition
electrode
Electronic ignition transformer
with ignition electrode attached
D-HG 55-20
D-HG 55-21
D-HG 55-10
19
 D-HG 400-90
As D-HG 400-50, but with flexible ignition
lance for tilting burners, only in conjunction
with exterior guide tubing (D-HG 400-91).
Ignition lances
The length of the ignition lance can be custom
manufactured according to the requirements of
the burner.
D-ZL 411 Ex
Ignition lance with high-voltage cable for
D-HG 400-53 Ex and D-HG 400-72 Ex
D-ZL 421
Ignition lance with high-voltage cable for
D-HG 400-65
D-ZL 422
Ignition lance with high-voltage cable and
handles for D-HG 400-65 for manual operation
D-ZL 423
Ignition lance with high-voltage cable for
D-HG 400-65, with additional connector on
the ignition lance
D-ZL 430
Ignition lance with high-voltage cable for
Class I, Div. 1, Group A, B, C & D
D-ZL 431
Ignition lance with high-voltage cable for
Class I, Div. 2 Group A, B, C & D.
Functional description
A high-voltage capacitor is charged up to an
 energy level of 4.5J in the ignition device. Once
the required energy level has been reached, a
non-wearing electronic switch (thyristor) triggers
a spark discharge at the ignition tip.
The device provides 20 ignition sparks per second
for a duration of 1 min. for reliable ignition
during the start phase. It then switches to 5 ignitionS64 VALVE POSITION CONTROL,S6A,S63,50-0712-12610-532,50-0712-12611-532,
50-0712-12612-532,50-0706-12610-532,50-0712-126U0-831,50-0712-126U1-831,50-0712-126U2-831,50-0706-126U0-831, 110-0712-12610,110-0712-12611,110-0712-12612,110-0706-126102,S55,
6A-6DRS020-0NN00-5AA0,S52, 92-0630-11350-532,92-0830-11350-532, 92-0920-11350-532, 
92-0930-11350-532,92-1180-11350-532, 92-1270-11350-532, 92-1280-11350-532,92-1600-11350-532, 92-2100-11350-532, 92-2550-11350-532, 92-1190-11350-532,93-0630-11350-532,93-0830-11350-532, 93-0920-11350-532,93-0930-11350-532,93-1180-11350-532, 93-1270-11350-532, 93-1280-11350-532,
93-1600-11350-532, 93-2100-11350-532, 93-2550-11350-532, 93-1190-11350-532,2-0630-11300-532,
92-0830-11300-532, 92-0920-1135-532,92-0930-1135-532,92-1180-11300-532, 92-1270-11300-532, 92-1280-11300-532,92-1600-11300-532, 92-2100-11300-532, 92-2550-1135-532, 92-1190-11300-532,
93-0630-11300-532,93-0830-11300-532, 93-0920-1135-532, 93-0930-1135-532,93-1180-11300-532, 93-1270-11300-532, 93-1280-11300-532,93-1600-11300-532, 93-2100-11300-532, 93-2550-1135-532, 93-1190-11300-532,S92-0630-11350-532,S92-0830-11350-532, S92-0920-11350-532, 
S92-0930-11350-532,S92-1180-11350-532, S92-1270-11350-532, S92-1280-11350-532,
S92-1600-11350-532, S92-2100-11350-532, S92-2550-11350-532,S92-1190-11350-532,
S93-0630-11350-532,S93-0830-11350-532, S93-0920-11350-532, S93-0930-11350-532,
S93-1180-11350-532, S93-1270-11350-532, S93-1280-11350-532,S93-1600-11350-532, 
S93-2100-11350-532,S93-2550-11350-532, S93-1190-11350-532,S92-0630-11300-532,
S92-0830-11300-532, S92-0920-1135-532, S92-0930-1135-532,S92-1180-11300-532, 
S92-1270-11300-532, S92-1280-11300-532,S92-1600-11300-532,S92-2100-11300-532, 
S92-2550-1135-532, S92-1190-11300-532,S93-0630-11300-532,S93-0830-11300-532, 
S93-0920-1135-532, S93-0930-1135-532,S93-1180-11300-532, S93-1270-11300-532, 
S93-1280-11300-532,S93-1600-11300-532,S93-2100-11300-532, S93-2550-1135-532, 
S93-1190-11300-532,90-1270-11350-532, 90-1280-11350-532,90-1600-11350-532, 
90-2100-11350-532,
sparks per second.
Models
 D-HG 400-50
Compact design, electronics unit and ignition
lance form one unit
 D-HG 400-51
As D-HG 400-50, with push-button for ignition
 D-HG 400-53 Ex
For potentially explosive atmospheres as per
II 2G Ex de IIC T5/T6
 D-HG 400-65
Separate design, ignition lance and electronics
unit are connected together via a highvoltage
cable
 D-HG 400-72 Ex
For potentially explosive atmospheres as per
II 2G Ex d IIC T5/T6
 D-HG 400-80
As D-HG 400-50, but portable, with portable
battery and integrated charger (D-HG 400-81)
High energy ignition
device
The D-HG 400 high energy ignition
device is suitable for the ignition of
gas or liquid fuels in industrial
burners of any capacity.
Features
 Ignition of liquid or gaseous fuels with large
power ratings
 Compact design: control unit and ignition
lance form one unit
 Ignites even heavy oil no. 6
 Special designs for potentially explosive atmospheres
are available
 Special design with battery operation
 Special design for tilting burner
 No wear because thyristor controlled
 20 ignition sparks with 4.5 J per second
(i.e. 90 J total per second)“ in accordance
with NFPA 8501 and NFPA 8502.
Applications
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants
 claus plants.
Certifications
 GOST-R
 PTB (ATEX).
Mains voltage 115 / 230 VAC, 50 / 60 Hz
or 24 / 48 VDC
Max. temperature
of ignition tip
600°C permanent
800°C for short period (max. 2 min)
Switching
performance 220 VA Operational life of
the ignition tip 106 ignition sparks
Ignition voltage /
energy 1500 V / 4.5 J Ignition frequency 20 sparks/s for 1 min.
thereafter 5 sparks/s
Power-on time 300 s (Duty cycle 50%) Dimensions 108 x 188 x 237 mm (LxH)
Perm. ambient
temperature -20…+60°C Weight (approx.) D-HG 400-50
with 3m lance: 9.0 kg
D-HG 400-65: 4.5 kg
D-HG 400-53 Ex: 40.0 kg
D-HG 400-72 Ex: 13.0 kg
D-HG 400-80: 9.0k g
D-HG 400-81: 11.0 kg
D-HG 400-90
with 3m lance: 9.0 kg
D-ZL 4…: 1.6 kg/m
Protection IP54
Switching capacity 250 VAC / 4A
Display LED
D-HG 400-51
D-HG 400-65
electronics unit
Ignition lance see page 19
20
Special designs
D-ZL 421
As D-ZL 421 but with handles for lance
D-ZL 423
As D-ZL 421 but with lance plug-in connector
D-ZL 430/431
As D-ZL 421 but with lance outlet box, for Ex-range Class I, Div. 1/2.
Features
 Ignition tip temperature-proof up to 600°C,
up to 800°C for a short period
 High-temperature model temperature-proof
up to 1000°C.
Applications
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants
 Claus plants.
Lance length L1 min. 0.7 m, max. 15 m Weight 1.6 kg/m at ?22 mm
Reinforcment tube
length L2 max. L1-0.7 m
Ignition lances
Connection to ignition devices for
the ignition of gas or liquid fuels in
industrial burners of any capacity.
D-ZL 411 Ex: separated ignition lance for D-HG 400-53 Ex / -72 Ex
Cable length L1 min. 1 m, max. 50 m Reinforcement
tube length L3 max. L2-0.7 m
Cable off-take
angle at the lance 0° or 90° Cable weight 0,5 kg + 0,5 kg/m
Lance length L2 min. 0.7 m, max. 15 m Lance weight 1.6 kg/m at ?22 mm
D-ZL 421: separated ignition lance for D-HG 400-65
Cable off-take at
the device 0° or 90° Reinforcement
cable length L3 max. L2-0.7 m
Cable length L1 min. 1 m, max. 50 m Cable weight 0.5 kg + 0.5 kg/m
Cable off-take at
the lance 0° or 90° Lance weight 1,6 kg/m at ?22 mm
Lance length L2 min. 0,7 m, max. 15 m
Reinforcement tube ? 25 mm
(optional)
Ignition lance for D-HG 400-50, -51
Cable Lance
Cable Lance
Reinforcement tube
?25 mm (optional)
Reinforcement tube
?25 mm (optional)
21
Accessories
 Terminal box
for connecting solenoid valve and limit
switch:
- IP66 (normal environment)
- IP65 (explosion protected model)
Ex-protected: II 2 G Ex e ia IIC T6
 Weather protection hoods
- for 300mm stroke
- for 400mm stroke
- for 500mm stroke
- for 600mm stroke.
Functional description
Correct positioning of the ignition tip near the
fuel/air mixture is a pre-requisite for reliable ignition
of a burner with a high-energy ignition
device. But temperatures in the optimal ignition
zone are usually much too high during burner
operation, resulting in possible damage to the
ignition tip.
The pneumatic retraction mechanism assumes
the task of positioning the ignition tip precisely
into the ignition zone of the burner and retracting
it again after successful ignition.
Features
 Automatic insertion and retraction of ignition
lances
 Compressed air drive
 Direction change with solenoid valve
 Speed control
 Non-contact limit switch
 For use with ignition deviceses
D-HG 400-50 and rigid ignition lances D-ZL
 Available stroke lengths: 300, 400, 500 and
600mm
 Pressure-tight and/or explosion protected
models also available
 Operational overpressure up to 10 bar.
Applications
 Chemical industry
 Refineries
 Cement plants
 Waste incinerators
 Steam generators
 Heating plants
 Claus plants.
Certification
 GOST-R
 PTB (ATEX).
Max perm.
operation
overpressure
10 bar Electric control 24/48 VDC or 115/230 VAC
Max. ambient
temperature -5…+50°C Protection IP65
Sheer force at
6 bar 1870 N Display LED
Retraction force at
6 bar 1682 N Ex- protection limit
switch NAMUR
(optional)
II 2 G Ex ia IIC T4…T6
Weight (approx.)
300 mm stroke: 9.0 kg
400 mm stroke: 11.0 kg
500 mm stroke: 12.5 kg
600 mm stroke: 14.0 kg Ex-solenoid valve
(optional) II 2 GD Ex m II T5
Pneumatic retraction
unit
Pneumatic retraction unit for the insertion
and retraction of ignition
lances and ignition devices.
Oil lance
D-VE 500
(with D-HG 400-50)
Ignition tip
optimal
ignition position
Spray cone
Spray angle
22
D-BT 0
19” rack for front panel mounting of
D-UG 660 control unit.
 For switching cabinet mounting in the inner
area (IP00), e.g. hinged frame assembly
 Cable connection via 48-pin screwed multipoint
socket connector
 Terminal connec from rear.
 D-BT 013
Rack for one D-UG 660 control
unit, 3RU, 24HP
 Dimensions
178x132,5x213 mm (HxD)
Weight 0.9 kg
 D-BT 023
Rack for two D-UG 660 control
units, 3RU, 42HP
 Dimensions
269x132,5x213 mm (HxD)
Weight 1.45 kg
 D-BT 043
Rack for four D-UG 660 control
units, 3RU, 84HP
 Dimensions
482x132,5x213 mm (HxD)
Weight 2.3 kg
D-BT 660
B19”-rack for rear panel mounting
of D-UG 660 control unit
 For switching cabinet mounting in the inner
area (IP00), e.g. rear panel assembly
 Cable connection via connection terminals
 Clamp connection from front.
 D-BT 660
Rack for one D-UG 660 control
unit, 3RU, 24HP
 Dimensions
171x149,5x215mm (HxD)
Weight 0.8 kg
 D-BT 660/2
Rack for two D-UG 660 control
units, 3RU, 42HP
 Dimensions
263x149,5x215 mm (HxD)
Weight 1.25 kg
 D-BT 660/4
Rack for four D-UG 660 control
units, 3RU, 84HP
 Dimensions
476x149,5x215 mm (HxD)
Weight 2.1kg
D-UG 660 G66
19” field plastic housing,
for D-UG 660 control unit
 For wall mounting in the outdoor area
 Cable connection via terminals in separate
terminal box
 Protection IP55.
 D-UG 660 G66
Enclosure for one D-UG 660
control unit
 Dimensions
135x149,5x250 mm (HxD)
Weight 1.5 kg
 D-UG 660 G66/2
Enclosure for two D-UG 660
control units
 Dimensions
340x236x275 mm (HxD)
Weight 3.65kg
D-BT 1
19” metal field housing for
D-UG 660 control unit
 For wall mounting in the outdoor area
 Cable connection via terminals in separate
terminal box
 Protection IP55.
Models
 D-BT 142
Enclosure for four D-UG 660
control units
 Dimensions
600x212x473 mm (HxD)
 D-BT 182
Enclosure for eight D-UG 660
control units
 Dimensions
600x345x473 mm (HxD)
D-ZS 140 / 141
Terminal box for
D-LE flame sensor and
D-LX compact flame monitor
 Protection IP65.
Models
 D-ZS 140
for safe environments
 Dimensions
105x105x66 mm (HxD)
Weight 0.35 kg
 D-ZS 140-12
12-pole version for
D-LX 200/720
 D-ZS 141
for potentially explosive
 atmospheres
II 2G Ex e II T5/T6
 Dimensions
110x75x55 mm (HxD)
Weight 0.4 kg
Housings
D-BT 043
D-BT 660/2
D-UG 660 G66/2
D-BT 142
Models
Models
Models
23
D-ZS 087-20
Digital display for displaying the
flame signal
 For optimal alignment of flame sensor with
the ball flange and/or for displaying the
 configuration of flame sensor and switching
device
 Display of the flame signal (pulse rate)
 Storing of minimum and maximum pulse rate
values
 Voltage supply via the flame sensor.
D-ZS 129-30/-40
LED bar graph display for the flame
intensity
 Installation in 19“ frame
 3RU/3HP
 Input 0/420 mA.
D-ZS 077-10
UV-C test light source for the functional
test of flame sensors
 For the functional test of flame sensor models
D-LE 103 UL, D-LE 603 UH/US and compact
flame monitor D-LX 100 UL,
 Power Supply 230 VAC / 50 Hz.
D-ZS 093
Combined test light source for the
UV-A, UV-B and IR spectral range
 For the functional test of flame sensor models
D-LE 603 UA/UAF/IS/IG/ISE/ISO, D-LE 701
UA/UAF/IS/IGA, D-LE 703 UA/UAF/ IS/IG, D-GT
800 UA/UAF, as well as compact flame monitors
D-LX 100 UA/UAF/IS/IG and D-LX 200
UA/UAF/IG
 Power Supply 230 VAC / 50Hz.
D-ZS 118
Optical adjustment aid for alignment
of the swivel mount on the
sighting tube
D-ZS 130
Fail-safe relay card
 Installation in 19“ rack/enclosure
 3RU/10HP
 Power supply 24VDC
 Protection IP00.
Accessories
 Dimensions
157x87x30 mm (HxD)
Weight 0.3 kg
Models
 D-ZS 129-30
Power supply 24 VDC
 Dimensions
15.2x128.4x107.5 mm (HxD)
Weight 0.2 kg
 D-ZS 129-40
Power supply 230VAC
 Dimensions
15.2x128.4x107.5 mm (HxD)
Weight 0.2 kg
 Dimensions
120x80x81.7 mm (HxD)
Weight 0.65 kg
 Dimensions
120x80x81.7mm (HxD)
Weight 0.65 kg
 Dimensions L=200, ?=87 mm
Weight 0.5 kg
D-ZS 087-20
D-ZS 077-10
D-ZS 129-30
D-ZS 093
D-ZS 118
 Dimensions
50.5x128x190.5 mm (HxD)
Weight 0.25kg
D-ZS 130
24
D-NG 24/05
Power supply for D-UG 120 or
D-LX 100.
 To supply two D-UG 120 switching devices
or D-LX 100 and D-LX 200/720 compact flame
monitors
 DIN-rail installation
 Input voltage 115/230VAC, output voltage
(unregulated) 24 VDC / 0.5 A
 Protection IP20.
D-ZS 033
Swivel mount for flexible alignment
of a flame sensor at the sighting
tube of a burner.
 D-ZS 033 I
for standard flame sensor,
G 1?“ thread
 Dimensions L=90, ?=115 mm
Weight 1.6 kg
 D-ZS 033 III
for Ex-flame sensor, G 1“ thread
 Dimensions L=160, ?=115 mm
Weight 3.4 kg
 other models on request.
D-ZS 114
Separable screw pipe connection
for the installation of a
D-LE 603…/94 Ex or a
D-LE 603…/95 Ex
on a standard port of a D-LE 603…
flame sensor.
 Dimensions
L=86, ?=46 mm
 Weight=400 g
 Thread G 1“
D-ZS 117
Thermal isolator with electrical insulation
for the isolation of the heat
transfer and/or for electrical isolation
between sighting tube and
flame sensor.
Features
 Rigid up to 120°C.
 D-ZS 117 I
for standard flame sensor,
G 1?“ thread
 Dimensions L=56, ?=51mm
Weight 0.05 kg
 D-ZS 117 III
for Ex-flame sensor, G 1“ thread
 Dimensions L=56, ?=51 mm
Weight 0.05 kg
 High-temperature model on request
 other models on request.
D-ZS 133
Ball valve for closing the sighting
tube.
Recommended when removing the flame
 sensor at increased furnace pressure.  D-ZS 133 I
for standard flame sensor,
G 1?“ thread
 Dimensions L=216, ?=58 mm
Weight 1.4 kg
 D-ZS 133 III
for Ex-flame sensor, G 1“ thread
 Dimensions L=174, ?=46 mm
Weight 0.9 kg
 other models on request.
Accessories
 Dimensions
70x75x118 mm (HxD)
Weight 0.55 kg
D-NG 24/05
D-ZS 033 I
D-ZS 117 I
D-ZS 133 I
Models
Models
Models
D-ZS 114
25
Requirements and Certifications
The DURAG GROUP, synonymous
with a demand for
high quality standards, has
been ISO 9001 certified for
years and has fully implemented
its requirements.
DURAG products are manufactured and tested
in accordance with both opean and international
standards, such as:
 APAVE International (France)
 Australian Gas Association (AGA)
 DIN-CERTCO (German Industrial Guideline)
 Deutsche Vereinigung des Gas- und Wasserfaches
e.V. (DVGW)
 Factory Mutual Research Cooperation (FM)
 GOST-R / GOSGORTECHNADZOR
 Physikalisch Technische Bundesanstalt (PTB)
 Underwriters Laboratories Inc. (UL).
 Underwriters Laboratories for Canada (C-UL)
Combustion technology stipulates that fuel may
not enter the combustion chamber if safe combustion
can not be guaranteed. If no flame is
detected, the fuel supply must be closed, often
within 1s. opean and international regulations
therefore specify a high degree of fail safety
and reliability for equipment deployed.
Monitoring of the flame must also be unaffected
by the construction of the furnace and its
 operational mode.
ope USA Canada
Steam Boilers EN 12952 Water Tube Boilers
EN 12953 Shell Boilers
NFPA 85 Boiler and Combustion Systems
Hazards Code
Firings EN 746 Industrial Thermoprocessing
Equipment
90/396 EG EC Gas Appliance Directive
NFPA 86 Standard for Ovens and Furnaces
Burner UL 726 Oil-Fired Boiler Assemblies
UL 795 Commercial-Industrial Gas Heating
Equipment
Flame Monitors and
Automatic Burner
Control Devices
EN 230 Automatic Burner Control Systems
for Oil Fired Burners
EN 298 Automatic Burner Control Systems
for Gas Fired Burners and Gas
Burning Appliances with or
without Fans
EN 60730-2-5 Automatic Electrical
Controls for Household Use and
Similar Use
UL 372 Primary Safety Controls for Gas- and
Oil-Fired Appliances
FM Class Combustion Safeguards
7610 and Flame Sensing Systems
CSA 22.2. Combustion
No. 199- Safety Controls
M89 and Solid-State Igniters for Gasand
Oil Burning Equipment
Functional safety IEC 61508
D-IO 55 D-IR 55 D-UV 55 D-LX 100 D-LX 200
D-LX 720
D-UG 120
with D-LE法國MARECHAL插頭 插座、德國曼奈柯斯MENNEKES插頭 插座、德國巴魯夫BALLUFF開關、德國IGUS電纜 拖鏈、意大利ROLLON導軌、德國FRAKO電容器、意大利EROELECTRONIC(ERO)溫控器、SCHAEVITZ傳感器、THOMAS真空泵、 R.STAHL防爆開關、SUN插裝閥、HYDRAFORCE線圈、ATOS電磁閥、KNF防爆、SUCO開關、ELEKTRIM電機、SEIKO傳感器、PERMA PURE干燥管、 VOITH齒輪泵、HAWE球閥、ASCON溫控器、TECNOLOGIC溫控器、STERLING線圈、HOKUYO傳感器、開關、ESTERS開關、YUKEN油泵、NORGREN電磁閥、REXROTH齒輪泵、電磁閥、EDUR真空泵、VTI閥門、TYCO閥門連接器、DOLD繼電器、CPS拖鏈 接頭、CRYDOM繼電器、FINDER繼電器、PIZZATO開關、MIDORI傳感器、FUJIKURA傳感器、YAMATAKE傳感器、開關、KOYO軸承、BROOK CROMPTON電機、PALL過濾器、MOOG伺服閥、EWO減壓閥、PEWATRON傳感器、WAIRCOM電磁閥、LECO干燥管、EUROTHERM控制器、JUMO控制器、VEGA料位計、DAITO保險絲、AMISCO電磁閥、ENTEK傳感器、BUHLER開關 控制器、ASM編碼器、WOERNER分配器、SAIET傳感器、開關、BIRCHER繼電器、BELLOFRAM調壓閥、MTS傳感器、BTI開關、傳感器、PARKER線圈、ALTHEN傳感器、AEG斷路器、GUNTHER繼電器等等。：