污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海瑞貝貿易有限公司
參 考 價 | 面議 |
產品型號A2
品 牌
廠商性質經銷商
所 在 地
聯系方式:采購部查看聯系方式
更新時間:2021-06-09 20:52:47瀏覽次數:119次
聯系我時,請告知來自 環保在線供應ISO12103粉塵A2粉 進口試驗粉塵
0微米至尺寸的等級 | |
名義尺寸范圍 (µm) | 材料品種 |
0 –5 | Fe2O3 (Hematite,赤鐵礦) Fe3O4 (Magnetite,磁鐵礦) |
0 – 10 | Fe2O3 (Hematite,赤鐵礦) Fe3O4 (Magnetite,磁鐵礦) |
可接受的尺寸范圍是指0微米至的尺寸產品中,至少包含尺寸的顆粒的體積百分為96%。 |
中等級別產品 | |||||||||||||||||||
名義尺寸范圍 (µm) | 材料品種 | ||||||||||||||||||
5 – 10 | Fe2O3 (Hematite,赤鐵礦) Fe3O4 (Magnetite,磁鐵礦) | ||||||||||||||||||
中等級氧化鐵產品按體積百分比計算,至少包含80%上面的尺寸的顆粒。
|
化學成分 | 重量百分比 | 化學成分 | 重量百分比 |
Si02 | 68 - 76 | Ca0 | 2.0 - 5.0 |
Al203 | 10 - 15 | Mg0 | 1.0 - 2.0 |
Fe203 | 2 - 5 | Ti02 | 0.5 - 1.0 |
Na20 | 2 - 4 | K20 | 2.0 - 5.0 |
尺寸(微米) | ISO 12103-1, A1 超細試驗粉塵 |
1 | 1.0 – 3.0 |
2 | 9.0 – 13.0 |
3 | 21.0 – 27.0 |
4 | 36.0 – 44.0 |
5 | 56.0 – 64.0 |
7 | 83.0 – 88.0 |
10 | 97.0 – 100 |
20 | 100 |
40 | -- |
80 | -- |
120 | -- |
Filtration Standards, & Specifications | Contaminants Required | Comments & Information |
ANSI B93.31: Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) | B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents |
ISO 4020: Road Vehicles - Fuel Filters for Diesel Engines | ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts | An Organic Contaminant is also required, see 4020 standard for details. |
ISO 4548-4: Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method) | ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust | Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust |
ISO 4548-12: Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE |
ISO 4572: Hydraulic Fluid Power-Filters - Multipass Method | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete) | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
ISO/TS 11155-1: Road Vehicles - Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1: Cabin Particulate cancelled.ISO/TS 11155-1 has been adopted by SAE |
ISO/TS 13353: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting | ISO 12103-1, A3 Medium Test Dust | ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353 |
ISO 16889: Hydraulic Fluid Power Filters - Multipass Method for Evaluating Filtration Performance of a Filter Element. | ISO 12103-1, A3 Medium Test Dust | ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method |
ISO 19438: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Filtration Efficiency using Particle Counting & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency |
ISO/CD19713: Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | This Standard is under development by ISO/TC22/SC7/WG3 Air & Oil Filters |
JIS D1608: Fuel Filter Test Method for Automotive Gasoline Engines | JIS Z 8901, Class 8 (fine) Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement |
JIS D1611: Automotive Parts - Test Methods of Lubricating Oil Filters | SOFTC-2A | Gravimetric Test Method |
JIS D1617: Automotive Parts - Fuel Filters for Diesel Engines Test Methods | An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement |
NFPA T3.10.8.8: Hydraulic Fluid Power-Filters - Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) | T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents |
SAE J 726: Air Cleaner Test Code | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
SAE HS- 806: Oil Filter Test Procedure Section 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters | ISO 12103-1, A2 Fine Test Dust SOFTC 2A | Gravimetric Test Method for Overall Efficiency & Capacity |
SAE HS- 806: Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test | Broad Range within 29-470 μm of glass beads Narrow Range in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof | Gravimetric Test Method for Single Pass Efficiency |
SAE J 905: Fuel Filter Test Methods | ISO 12103-1, A2 Fine Test Dust | Gravimetric Test Method for Efficiency & Capacity |
SAE J 1669-1: Passenger Compartment Air Filter Test Code - Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1 is cancelled.ISO 11155-1 has been adopted by SAE |
SAE J 1858: Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 is cancelled.ISO 4548-12 has been adopted by SAE |
SAE J 1985: Fuel Filters - Initial Single Pass Efficiency Test Method | ISO 12103-1, A2 Fine Test Dust | Particle Counting Fuel Filter Test Method- Fractional Efficiency |
Contaminants | Standards,& Specifications | Comments &Information |
DMT test dust type 8 ®(Simulated house hold dust) | IEC 60312 Ed. 4, 2007, Chap.5.1.2.3 | Composition is described in the standard |
Mineral dust (dolomite sand) | IEC 60312 Ed. 4, 2007, Chap.5.1.2.1 | Particle size composition -see standard |
Carpet test dust | IEC 60312 Ed. 4, 2007, Chap.5.1.2.2 | Particle size composition -see standard |
Emission test dust | IEC 60312 Ed. 4, 2007, Chap.5.1.2.5 | Particle size composition -see standard |
Customized test dusts or mixture preparations |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://www.hg1112.cn/st141204/
主營產品:太平洋/哈希顆粒計數器、高效過濾器檢測儀、標準顆粒、清洗液、水份儀、閃點儀、亞利桑那粉塵、DOP發生和檢測儀等。
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
上海瑞貝貿易有限公司