泵吸式甲醛檢測儀
Pump suction formaldehyde detector
儀器介紹
Introduction of apparatus
氣體檢測儀是一種高性能及多功能氣體檢測儀?？梢造`活配置檢測單種或多種有毒有害及可燃性危險氣體。
Gas detector is a kind of high performance and multifunctional gas detector. Can be configured flexibly to detect single or multiple toxic and flammable hazardous gas.
氣體檢測儀采用防爆結構設計，采用高精度進口傳感器，可以瞬時檢測到氧氣、可燃氣體和有毒氣體的存在，您可以根據需要選擇擴散式或泵吸式進行采樣，聲光報警提示，保證在非常不利的工作環境下也可以檢測危險氣體并及時提示操作人員預防。
Explosion proof structure design of the gas detector, using high-precision sensors, can be instantaneous detection to oxygen, combustible gas and toxic gas exists, you can choose according to diffusion or suction pump sampling, acousto-optic alarm, ensure the very adverse working environment can also detect hazardous gases and prompt the operator prevention of.
泵吸式甲醛檢測儀
Pump suction formaldehyde detector
特點
Characteristic
-液晶顯示、瞬時值、峰值、平均值顯示
Liquid crystal display, instantaneous value, peak value, average value display
-開機或需要時對顯示、電池、傳感器、聲光報警功能自檢
- boot or needed to display, battery, sensor, sound and light alarm function test
-出眾的音頻聲音報警，具有兩級報警
- superior audio sound alarm, with two levels of alarm
-安全提示：定期閃燈，聲音提示
Safety tip: regular flash, voice prompt
-配有充電器，攜帶方便，堅固耐用
- equipped with charger, portable, durable
-維護費用低
- low maintenance cost
-可帶數據存儲（選配）
But with data storage (optional)
技術參數
Technical parameters
檢測氣體：空氣中的甲醛（CH2O）
Gas: detection of formaldehyde in the air (CH2O)
量程：0-20.00ppm
Range: 0-20.00ppm
基本誤差：＜±1.5%（F.S）
The basic error: < ± 1.5% (F.S)
zui小讀數：0.01ppm
The minimum reading: 0.01ppm
響應時間：≤50秒
Response time: ≤ 50 seconds
傳感器壽命：36個月
Sensor life: 36 months
電池：3.6V鋰離子充電電池
3.6V battery: lithium ion rechargeable battery
電池工作時間：連續工作大概200小時左右
Battery operating time: about 200 hours of continuous work
顯示：大屏幕液晶顯示
Display: large screen liquid crystal display
報警：聲、光報警
Warning: sound, light alarm
直接讀數：瞬時值、峰值、電池電壓、TWA、S
Direct reading: instantaneous value, peak value, the battery voltage, TWA, S
防爆標志：Ex ibdIICT3
Explosion proof mark: Ex ibdIICT3
防護等級：IP45
Protection grade: IP45
工作溫度：-10∽45℃
Working temperature: -10 ~ 45 ℃
工作濕度：5-90%RH
Humidity: 5-90%RH
尺寸：180mm（長）×110mm（寬）×80mm（厚）
Size: 180mm (length) * 110mm (wide) x 80mm (thick)
重量：1Kg（帶充電器）
Weight: 1Kg (with charger)
注：
Note:
1．EC代表電化學式傳感器；NDIR代表紅外傳感器；PID代表光離子傳感器。
1.EC stands for electrochemical sensor; NDIR represents the infrared sensor; PID stands for light ion sensor.
2．以上數據取決于環境條件，氣體量程如有要求請與我們。
More than 2 data depending on the environment conditions, the gas range if required please contact us.
3．技術參數的修改，不作另行通知。
3 technical parameters of modification, without prior notice.
關于更多 泵吸式甲醛檢測儀 詳細資料請您
A suction pump formaldehyde detector more details please contact us
