污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
北京艾諾德儀器有限公司
暫無信息 |
閱讀:454發布時間:2014-5-14
電線電纜煙密度測試儀
編號:GD201311030069
規格:DLMD-A
DLMD-A電線電纜煙密度測試儀
滿足標準: GB/T17651.1、17651.2-1998、IEC61034-1~61034-2:1997標準規定。
產品用途:與鹵酸氣體測試儀同時配合使用,是檢驗電線電纜及光纜低阻燃性電纜評定發煙特性*的專業儀器。
工作原理:
電纜或光纜在特定條件下燃燒的煙密度光測系統由光源、硅光電池接受器和計算機系統組成。光源產生的光通過3m×3m×3m的煙密度實驗室,在光源對面的墻上形成一直徑1.5m±0.1m 的均勻光束,安裝在光束中心處的光電池檢測來自光源的光束強度。當燃燒室內由于燃燒電纜或光纜產生大量煙霧時,煙把光電吸收掉一部分,達到硅光電池的光束強度就減弱,通過計算機系統對數據進行處理,就能夠計算出相對于初始時為100%的具有線性響應的透光率It。
本儀器涉及機械、光學、電子三個方面的專業知識,是機光電一體化產品,具有結構合理、性能穩定、操作簡便等優點;具有WINDOWS XP操作系統、LabVIEW風格界面、完善的安全機制。測試期間實時顯示測量結果并動態地繪出曲線,數據可以*保存、調閱和打印輸出。
產品組成:
1、可積木式實驗室(國標要求的實驗室面積為3m×3m×3m,本套系統中的實驗室可根據客戶的實際場地進行積木調整,實驗室中包括擋風板、燃燒盤、試樣支架、循環風扇、精密凈化穩壓電源系統、連接系統、電氣控制系統等);
2、*德國光源系統(標稱光源和硅光接收系統);
3、數據采集處理及計算機全自動控制試驗系統;
產品性能指標:
1、透光率(吸收率)測試精度±1%
2、標稱功率:100W
標稱電壓:12V
標稱光通量: 2000-3000lm
標稱色溫:2800-3200K
3、電源輸入AC220V
4、功率 600W
5、標準光燈功率100 W
6、信號輸出RS232C標準電平
Wire and cable smoke density tester
Number: GD201311030069
Specification: DLMD - A
DLMD - A wire and cable smoke density tester
Meet the standards: GB/T17651.1, 17651.2 1998, IEC61034-1 ~ 21, 61034-61034 standard.
Product use: used with halogen acid gas tester at the same time, test wire and cable and optical fiber cable is low flame retardant cable assess smoke characteristics essential professional instrument.
Working principle:
Cable or fiber under certain conditions of combustion smoke density measuring system is composed of light source, silicon photocell of receiver and the computer system. Light source of light by 3 m x 3 m x 3 m smoke density of the laboratory, in the wall opposite the light source form a uniform beam diameter 1.5 m + 0.1 m, the installation of the photocell detection in the center of the beam intensity of light from a light source. When the combustion chamber due to generate a lot of smoke when burning cable or optical cable, the smoke of photoelectric absorption, achieve the silicon photocell beam intensity is abate, through the computer system for data processing, will be able to calculate the relative to the initial 100% with linear response light transmittance of It.
It involves the mechanical, optical, electronic three aspects of professional knowledge, is the machine products, photoelectric integration has advantages of reasonable structure, stable performance, easy operation; With WINDOWS XP operating system, LabVIEW interface style, perfect security mechanism. During testing real-time display measurement results and dynamically draw perfect curve, the data can be stored permanently and read and print output.
The component of product:
1, building block laboratory (national standard of lab area of 3 m x 3 m x 3 m, this set of system in the laboratory can be adjusted according to the customer's actual area for building blocks, in the laboratory including wind deflector, burning plate, sample holder, circulating fan, precision purifying regulated power supply system, connection system and electric control system, etc.);
2, light source system imported from Germany (nominal light source and silicon optical receiving system);
3, data acquisition, processing and computer automatic control test system;
Product performance indicators:
1, light transmittance (absorption) testing accuracy + / - 1%
2, nominal power: 100 w
Nominal voltage: 12 v
Nominal flux: 2000-3000 lm
Nominal color temperature: 2800-3200 k
3, power input AC220V
4, power 600 w
5, the standard light power 100 W
6, signal output RS232C standard level
產品圖片:
(控制系統) (實驗室)
產 品 配 置
序 號 | 名 稱 | 數 量 |
1 | 計算機 | 1套 |
2 | 煙密度測試軟件 | 1套 |
3 | 控制箱 | 1臺 |
4 | 轉換卡 | 1個 |
5 | 靜化高精度穩壓電源 | 1臺 |
6 | 發射器 | 1個 |
7 | 接收器 | 1個 |
8 | 密封箱 | 2個 |
9 | 燃燒支架 | 1套 |
10 | 風速攪拌器 | 1個 |
11 | 說明書 合格證 | 1套 |
商鋪:http://www.hg1112.cn/st116882/
主營產品:生產銷售氣體檢測儀,不銹鋼電熱蒸餾水器,甲醛穿孔萃取器,便攜式粉塵儀,粉末取樣器,風速風向儀,真空度檢測儀,酸堿度計,百葉箱
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份