旋轉蒸發儀-實驗型

Rotary evaporator-Experimental

用途及簡介

旋轉蒸發器是采用旋轉蒸發瓶（燒瓶），增大蒸發面積在減壓下置于水浴中一邊旋轉，一邊加熱的裝置，使瓶內溶液擴散蒸發。是化學工業，醫藥工業，高等院校和科研實驗室等單位用于制造及分析實驗賴以濃縮，干燥，回收等較為理想的基本儀器。

Rotary evaporator is a rotary evaporation flask (flask), increase the evaporation area under reduced pressure placed in a water bath while rotating, while heating device, so that the solution diffusion bottle evaporation.Is the chemical industry, pharmaceutical industry, universities and research laboratories and other units for the manufacture and analysis of the experiment depends on the concentration, drying, recycling and other ideal essential basic instruments.

技術參數：

產品特點：

? 結構合理，密封效果，耐蝕性強，可保持真空度-0.096Mpa.

? 水浴鍋升降，獨立主機，拆卸方便。

? 不銹鋼底座，框架構建均為不銹鋼材質和鋁合金鑄件組成，造型美觀大方。

? 氟橡膠密封圈結合PTFE密封組件，耐多種腐蝕。

? 無極調速，轉速數顯，溫度數顯，更直觀，便捷。

旋轉蒸發儀系列 實驗型

產品特點：

水浴油浴兩用，可根據反應需求選配。

整機設計美觀大方，合理緊湊，操作簡捷方便，控溫精準，性能可靠。

主機采用鋁合金外殼，特種工程塑料，機構緊湊，外觀精美，實用性強。

采用PID智能控溫，當溫度高于設定溫度加熱管自動停止加熱。

該系列蒸發儀加熱鍋體積小，升溫迅速。

加熱鍋采用特氟隆復合鍋，清潔方便。

特氟隆密封圈結合聚四氟乙烯密封組件，防腐蝕，密封效果好，經久耐用。

防腐蝕性和耐磨性，蒸汽密封管采用一體化設計，可以防止交叉污染的發生，而且拆卸和清潔極其方便

帶環螺帽：順旋自動扣緊旋轉瓶，逆旋快速推卸旋轉瓶。 ·無級調速用旋鈕。

技術參數：

旋轉蒸發儀系列 實驗型

用途特點：

     進行提純蒸餾試驗的設備，通過恒溫加熱，在負壓條件下旋轉形成薄膜，高效蒸發，然后再冷凝回收溶媒，達到提純分離的效果。產品可與循環水式多用真空泵、隔膜真空泵、低溫循環（真空）泵、循環冷卻器、恒溫循環器、低溫冷卻液循環泵等配套組成系統裝置。

●Teflon(PTFE)和氟橡膠雙重密封，*技術保證高真空度。

●冷凝器抽氣接咀下置，與真空管連接后更加安全。

●模塊化設計，可擴展性強。

●升降操作方便，平滑的上下移動，并方便鎖定。

●專用電機，蝸輪蝸桿平穩傳動。

●速度顯示，操作直觀、方便。

●溫度采用PID控制，控溫準確。

●浴槽與主機分離，便于靈活配置。

技術參數：

旋轉蒸發儀系列 中試/生產型

? 主體支架采用不銹鋼+鋁合金，結構合理，用料講究。

? 玻璃部件全部采用高硼硅玻璃（GG-17），耐高溫，防腐蝕。

? 密封系統采用進口氟橡膠和特氟隆雙向組合密封，耐腐蝕壽命長，保持高真空度。

? 真空壓力表顯示實時真空，油性表具有防震動特性。

? 直立式三層蛇形盤管冷凝器，主冷+付冷雙冷凝器，確保高回收率。

? 可連續進料方便客戶使用，閥門式加料閥套接四氟乙烯管。

? 收集瓶設有下放料，方便蒸發提取物的收集、放料。

? 止回閥控制，可連續放料，機器在工作狀態下，可進行真空切換。

? 所有閥門采用式一體手輪閥，密封性好，操作更為簡單方便

? 微電腦式電源開關控制。

? 液晶全屏顯示，溫度、轉速雙數顯，浴鍋智能恒溫控制，PT100型傳感器快速、準確傳遞溫度。

? 直流無刷減速電機，旋轉穩定，無火花，減速增力。

? 浴鍋電動升降，升降部分采用減速增力電機，升降過程中更平穩。

? 鍋膽采用優質304不銹鋼，防腐耐用，鍋膽外層包覆硅膠層，高溫使用更安全。

? 超溫安全保護功能，當實際溫度超過設定溫度5℃時，機器加熱就會自動斷電。

? 防干燒功能，加熱鍋里水位低于加熱管時，機器就會自動斷電。

? 機器工作途中如果突然斷電，再次接通電源時，機器會自動停止加熱。

技術參數：

旋轉蒸發儀系列 中試/生產型

? 主體支架采用不銹鋼+鋁合金，結構合理，用料講究。

? 玻璃部件全部采用高硼硅玻璃（GG-17），耐高溫，防腐蝕。

? 密封系統采用進口氟橡膠和特氟隆雙向組合密封，耐腐蝕壽命長，保持高真空度。

? 真空壓力表顯示實時真空，油性表具有防震動特性。

? 直立式三層蛇形盤管冷凝器，主冷+付冷雙冷凝器，確保高回收率。

? 可連續進料方便客戶使用，閥門式加料閥套接四氟乙烯管。

? 收集瓶設有下放料，方便蒸發提取物的收集、放料。

? 止回閥控制，可連續放料，機器在工作狀態下，可進行真空切換。

? 所有閥門采用式一體手輪閥，密封性好，操作更為簡單方便

? 微電腦式電源開關控制。

? 液晶全屏顯示，溫度、轉速雙數顯，浴鍋智能恒溫控制，PT100型傳感器快速、準確傳遞溫度。

? 直流無刷減速電機，旋轉穩定，無火花，減速增力。

? 浴鍋電動升降，升降部分采用減速增力電機，升降過程中更平穩。

? 鍋膽采用優質304不銹鋼，防腐耐用，鍋膽外層包覆硅膠層，高溫使用更安全。

? 超溫安全保護功能，當實際溫度超過設定溫度5℃時，機器加熱就會自動斷電。

? 防干燒功能，加熱鍋里水位低于加熱管時，機器就會自動斷電。

? 機器工作途中如果突然斷電，再次接通電源時，機器會自動停止加熱。

產品特點：

1.*的密封結構和精選密封材料，耐蝕性強，能保持-0.096MPA以上真空度

2.高蒸發效率，高回收率；

3.裝拆方便、操作方便，維修方便；

4.不銹鋼底盤、立柱、立軸，造型美觀，耐腐蝕；

5.密封部件：選用的聚四氟乙烯和優質氟橡膠材料，經特殊工藝技術處理，增強密封性，防腐性和耐磨性

6.收集系統：采用新型的自動切換閥，在不影響系統真空和溶液蒸餾的情況下可進行連續收集。

7.主體結構：采用優質鋼材及304不銹鋼材質，外觀進行全面噴塑，更加完善和提高儀器的合理性能。

8.交流感應電機、無級調速，無電刷、無火花、長壽命。

9.不間斷工作, 高蒸發率、高回收率、采用*的變頻、電子調速裝置

10.玻璃儀器采用GG-17高硼硅玻璃制造，理化性能良好。 

Rotary Evaporator-Experimental Type

Usage and Brief Introduction

Rotary evaporator is a device that uses rotary evaporator (flask) to increase evaporation area and put it in water bath to rotate and heat at the same time, so that the solution in the bottle can diffuse and evaporate. It is an ideal basic instrument for chemical industry, pharmaceutical industry, universities and scientific research laboratories to manufacture and analyze experiments, which rely on concentration, drying and recycling.

Technical parameters:

Product characteristics:

Reasonable structure, excellent sealing effect, strong corrosion resistance, vacuum-0.096 Mpa can be maintained.

Water bath pot lifting, independent host, easy disassembly.

Stainless steel base, frame construction is made of stainless steel and aluminum alloy castings, beautiful and generous shape.

Fluorine rubber sealing ring combined with PTFE sealing components, resistant to a variety of corrosion.

Infinite speed regulation, speed digital display, temperature digital display, more intuitive, convenient.

Series of experimental models of rotary evaporator

Product characteristics:

Water bath and oil bath can be selected according to the reaction demand.

The whole machine has beautiful design, reasonable and compact, simple and convenient operation, precise temperature control and reliable performance.

The main engine is made of aluminium alloy shell, special engineering plastics, compact mechanism, exquisite appearance and strong practicability.

PID intelligent temperature control is adopted, when the temperature is higher than the set temperature, the heating tube automatically stops heating.

The heating pot of this series of evaporators has small volume and rapid heating.

The heating pot adopts Teflon composite pot, which is clean and convenient.

Teflon sealing ring combined with PTFE sealing components, corrosion-resistant, good sealing effect, durable.

Corrosion resistance and abrasion resistance. The steam sealing pipe adopts integrated design, which can prevent the occurrence of cross-contamination. It is also very convenient to disassemble and clean.

Ring nuts: automatically fasten the rotary bottle in forward rotation, and quickly push the rotary bottle in reverse rotation.

Stepless speed control knob.

Technical parameters:

Series of experimental models of rotary evaporator

Use characteristics:

Purification and distillation test equipment, through constant temperature heating, rotating under negative pressure conditions to form a film, high-efficiency evaporation, and then condensation and recovery of solvent, to achieve the effect of purification and separation. The product can be equipped with circulating water multi-purpose vacuum pump, diaphragm vacuum pump, cryogenic circulation (vacuum) pump, circulating cooler, constant temperature circulator, cryogenic cooling liquid circulating pump, etc.

Teflon (PTFE) and fluororubber double seals, advanced technology to ensure high vacuum.

The condensator suction nozzle is lower, which is safer after connecting with the vacuum tube.

Modular design with strong expansibility.

Easy lifting operation, smooth upward and downward movement, and easy locking.

Special motor, worm wheel and worm drive smoothly.

Speed display, intuitive and convenient operation.

Temperature is controlled by PID with accurate temperature control.

Separation of bathtub and mainframe makes it easy to configure flexibly.

Technical parameters:

Pilot/Production Type of Rotary Evaporator Series

The main bracket is made of stainless steel and aluminium alloy with reasonable structure and exquisite materials.

The glass parts are all made of high borosilicate glass (GG-17), which is high temperature resistant and corrosion resistant.

The sealing system adopts imported fluororubber and Teflon two-way combination seal, which has long corrosion resistance and high vacuum.

Vacuum pressure gauge shows real-time vacuum and oil performance is vibration-proof.

Vertical three-layer serpentine coil condenser, main-cooled + sub-cooled double condenser to ensure high recovery.

Continuous feeding is convenient for customers. Valve feeding valve is sleeved with tetrafluoroethylene pipe.

The collecting bottle is equipped with a feeding device to facilitate the collection and feeding of evaporative extracts.

Check valve control, continuous feeding, machine in working state, can carry out vacuum switching.

All valves adopt the latest integrated handwheel valves with good sealing and easy operation.

Microcomputer power switch control.

LCD full screen display, temperature, speed dual digital display, bathtub intelligent constant temperature control, PT100 sensor fast and accurate temperature transfer.

Brushless DC deceleration motor, stable rotation, no spark, deceleration and force increase.

Bath pot electric lifting, lifting part using deceleration booster motor, the lifting process is more stable.

High quality 304 stainless steel is used for pot gall. It is corrosion resistant and durable. The outer layer of pot gall is coated with silica gel. It is safer to use at high temperature.

Over-temperature safety protection function, when the actual temperature exceeds the set temperature of 5 degrees Celsius, the machine heating will automatically power off.

Anti-drying function, when the water level in the heating pot is lower than the heating pipe, the machine will automatically power off.

When the power supply is switched on again, the machine will automatically stop heating if the power is suddenly cut off during the operation of the machine.

Technical parameters:

Pilot/Production Type of Rotary Evaporator Series

The main bracket is made of stainless steel and aluminium alloy with reasonable structure and exquisite materials.

The glass parts are all made of high borosilicate glass (GG-17), which is high temperature resistant and corrosion resistant.

The sealing system adopts imported fluororubber and Teflon two-way combination seal, which has long corrosion resistance and high vacuum.

Vacuum pressure gauge shows real-time vacuum and oil performance is vibration-proof.

Vertical three-layer serpentine coil condenser, main-cooled + sub-cooled double condenser to ensure high recovery.

Continuous feeding is convenient for customers. Valve feeding valve is sleeved with tetrafluoroethylene pipe.

The collecting bottle is equipped with a feeding device to facilitate the collection and feeding of evaporative extracts.

Check valve control, continuous feeding, machine in working state, can carry out vacuum switching.

All valves adopt the latest integrated handwheel valves with good sealing and easy operation.

Microcomputer power switch control.

LCD full screen display, temperature, speed dual digital display, bathtub intelligent constant temperature control, PT100 sensor fast and accurate temperature transfer.

Brushless DC deceleration motor, stable rotation, no spark, deceleration and force increase.

Bath pot electric lifting, lifting part using deceleration booster motor, the lifting process is more stable.

High quality 304 stainless steel is used for pot gall. It is corrosion resistant and durable. The outer layer of pot gall is coated with silica gel. It is safer to use at high temperature.

Over-temperature safety protection function, when the actual temperature exceeds the set temperature of 5 degrees Celsius, the machine heating will automatically power off.

Anti-drying function, when the water level in the heating pot is lower than the heating pipe, the machine will automatically power off.

When the power supply is switched on again, the machine will automatically stop heating if the power is suddenly cut off during the operation of the machine.

Product characteristics:

1. Unique sealing structure and selected sealing materials, strong corrosion resistance, can maintain vacuum above - 0.096 MPA.

2. High evaporation efficiency and recovery;

3. Easy to assemble, disassemble, operate and maintain.

4. Stainless steel chassis, pillars and shafts, with beautiful appearance and corrosion resistance;

5. Sealing parts: Select the latest PTFE and high-quality fluorine rubber materials, after special process and technology treatment, enhance the sealing, anti-corrosion and wear resistance.

6. Collection system: A new type of automatic switching valve can be used for continuous collection without affecting the vacuum and solution distillation of the system.

7. Main structure: high-quality steel and 304 stainless steel are used, and the appearance is sprayed in an all-round way to improve and improve the rational performance of the instrument.

8. AC induction motor, stepless speed regulation, brushless, sparkless, long life.

9. Uninterrupted operation, high evaporation rate, high recovery rate, using advanced frequency conversion, electronic speed regulation device

10. The glass instrument is made of GG-17 high borosilicate glass with good physical and chemical properties.