1、適用范圍：適用于各類密度浮選法難以分選的混雜塑料，分選ABS/PC/沉水PP , PET/PVC , PC/PMM , ABS/改苯 , 合金/改苯等混雜塑料。破碎粒單次分選準確率（純度）可達95%以上，二次分選可接近*。對特殊不同組份的混合物料要先測試其帶電性與塑料在不同的空間由于摩擦所產生極性，或者添加相應的活性劑增加其表面帶電性，以便于更好的分選出不同的物料，
2、工作效率：每小時過機工作量為1噸上下，日工作量達20噸左右，裝機容量30千瓦，占地面積約12平方米。
3、工作原理：待分選物料在進入靜電分選高壓空間前要通過特殊的裝置預先使在自身的碰撞摩擦下產生相應的電荷，因在分選過程中物料的粒徑大小對物料本身賀電性有顯著區別，物料顆粒均勻度和物料自身的重量在分選過程中也受到相應的影響，對粉碎到顆粒狀態差別比較大的情況下，可以通過篩分不同的顆粒大小，來提高分選過程中對回收純度的影響降低，也可對根據顆粒狀態差別比較小的顆粒調節分選電壓的選擇來控制回收物料的純度，針對不同的物料粒徑分離時所需要高壓不同，所以物料進入主機分離前要用破碎機把物料破碎成10MM左右的顆粒狀或片狀，使得分離效果達到理想狀態
1, The scope of application: Mixed Plastic that all kinds of density flotationmethod is difficult to sorting, sorting ABS/PC/ submerged PP, PET/PVC, PC/PMM,ABS/ modified with benzene, benzene mixed plastic alloy / change. The accuracy rate of broken grain single sorting (purity) can reach more than 95%,the second time’s sorting can be close to *. To mixed material of special different component first should test its charged and plastics in different space due to friction generated polarity or adding corresponding surfactant Active agent increases its surface charged, to facilitate better sorting out of different materials,
2, Efficiency: about1000kg/ h, 20,000kg/d, 30 kw/per. 12m2/per.
3, Principle:
Special Equipment
The material to be sorted ------------------High-voltage electrostatic separation space
High-voltage electrostatic separation space to be sorted into electrostatic separation material in high pressure space prior to the adoption of special device to make the produce corresponding charge in the collision friction itself, for the material in the process of selecting the particle size of the material itself has the obvious difference of congratulation, material particle uniformity and material of its own weight is also affected by the the corresponding effects in the process of sorting, crushing to thestate of particles of relatively large differences, can through the screening of different particle size, to improve the influence to recycle purity in the sorting process is reduced, but also adjust the separation voltage according to the difference of particle state of relatively small particle size chosen to control the purity of the material forrecycling, different particle size separation required pressure is different, want to usethe material crusher broken into around 10MM particles or flakes so the material into the host before separation, to make the score from effect to achieve the ideal state
