科里奧利質量流量

Flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os.
Highest measurement performance for liquids and gases under varying, demanding process conditions.

Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – mriable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").

Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

DN 8 to 250 (? to 10")

Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)

Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.25 %
Density (liquid): ±0.0005 g/cm3

0 to 2 200 000 kg/h (0 to 80 840 lb/min)

PN 100, Class 600, 63K

Standard: –50 to +150 °C (–58…+302 °F)
Option: –50 to +240 °C (–58…+464 °F)
High temperatur option: –50 to +350 °C (–58…+662 °F)
Option: –196 to +150 °C (–320 to +302 °F)

Standard: –40 to +60 °C (–40 to +140 °F)
Option: –60 to +60 °C (–76 to +140 °F)

Standard: 1.4301 (304), corrosion resistant
Option: 1.4404 (316L)
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L

AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat

Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69.
Transmitter remote version: IP66/67, Type 4X enclosure

4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible

4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output

Status input
4-20 mA input

HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA

DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

科里奧利質量流量

Flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os.
Highest measurement performance for liquids and gases under varying, demanding process conditions.

Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – mriable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").

Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

DN 8...250 (?...10")

測量管：1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分：1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)

質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度

質量流量（液體）：±0.10 %（標準）、0.05 %（可選）
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.35 %
密度（液體）：±0.0005 g/cm3

0...2 200 000 kg/h (0...80 840 lb/min)

PN 100，Cl. 600，63K

標準型：–50...+150 °C (–58…+302 °F)
可選：–50...+240 °C (–58…+464 °F)
高溫型：–50...+350 °C (–58…+662 °F)
可選：–196...+150 °C (–320...+302 °F)

標準：–40...+60 °C (–40...+140 °F)
可選：–60...+60 °C (–76...+140 °F)

標準：1.4301 (304)，耐腐蝕
可選：1.4404 (316L)
傳感器接線盒（標準）：鋁合金AlSi10Mg涂層
傳感器接線盒（可選）：1.4301 (304)、1.4404 (316L)、1.4409 (CF3M)，類同于316L

鋁合金AlSi10Mg涂層；1.4409 (CF3M)，類同于316L；聚碳酸酯

分體式傳感器（標準）：IP66/67，Type 4X
分體式傳感器（可選）：IP69。
分體式變送器：IP66/67，Type 4X
外接WLAN天線：IP67

四行背光顯示，觸摸鍵操作（外部操作）
通過現場顯示單元和調試軟件設置

4路輸出：
4...20 mA HART（有源/無源）
4...20 mA WirelessHART
4...20 mA（有源/無源）
脈沖/頻率/開關量輸出（有源/無源）
雙脈沖輸出（有源/無源）
繼電器輸出

狀態輸入
4...20 mA輸入

HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA

24 VDC
100...230 VAC
100...230 VAC / 24 VDC（非危險區）

ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC

CE認證、C-tick認證、EAC認證

功能安全遵循IEC 61508標準，允許在IEC 61511標準規定的安全應用中使用

在認證標定裝置上執行標定（符合ISO/IEC 17025標準）
Heartbeat Technology（心跳技術）符合ISO 9001:2008標準章節7.6 a的溯源校驗要求（TüV認證）
MI-005非水液體（碳水化合物、低溫液體）
NTEP（非水液體、LPG、低溫液體）

LR approval, DNV GL approval, ABS approval, BV approval, CCS approval

PED、CRN、AD 2000

3.1材料證書
NACE MR0175/MR0103，PMI，焊接測試遵循EN ISO、ASME、NORSOK標準

3-A、EHEDG

科里奧利質量流量

Flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os.
Highest measurement performance for liquids and gases under varying, demanding process conditions.

Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – mriable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").

Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

DN 8...250 (?...10")

測量管：1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分：1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)

質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度

質量流量（液體）：±0.10 %（標準）、0.05 %（可選）
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.35 %
密度（液體）：±0.0005 g/cm3

0...2 200 000 kg/h (0...80 840 lb/min)

PN 100，Cl. 600，63K

標準型：–50...+150 °C (–58…+302 °F)
可選：–50...+240 °C (–58…+464 °F)
高溫型：–50...+350 °C (–58…+662 °F)
可選：–196...+150 °C (–320...+302 °F)

標準：–40...+60 °C (–40...+140 °F)
可選：–60...+60 °C (–76...+140 °F)

標準：1.4301 (304)，耐腐蝕
可選：1.4404 (316L)
傳感器接線盒（標準）：鋁合金AlSi10Mg涂層
傳感器接線盒（可選）：1.4301 (304)、1.4404 (316L)、1.4409 (CF3M)，類同于316L

鋁合金AlSi10Mg涂層；1.4409 (CF3M)，類同于316L；聚碳酸酯

分體式傳感器（標準）：IP66/67，Type 4X
分體式傳感器（可選）：IP69。
分體式變送器：IP66/67，Type 4X
外接WLAN天線：IP67

四行背光顯示，觸摸鍵操作（外部操作）
通過現場顯示單元和調試軟件設置

4路輸出：
4...20 mA HART（有源/無源）
4...20 mA WirelessHART
4...20 mA（有源/無源）
脈沖/頻率/開關量輸出（有源/無源）
雙脈沖輸出（有源/無源）
繼電器輸出

狀態輸入
4...20 mA輸入

HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA

24 VDC
100...230 VAC
100...230 VAC / 24 VDC（非危險區）

ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC

CE認證、C-tick認證、EAC認證

功能安全遵循IEC 61508標準，允許在IEC 61511標準規定的安全應用中使用

在認證標定裝置上執行標定（符合ISO/IEC 17025標準）
Heartbeat Technology（心跳技術）符合ISO 9001:2008標準章節7.6 a的溯源校驗要求（TüV認證）
MI-005非水液體（碳水化合物、低溫液體）
NTEP（非水液體、LPG、低溫液體）

LR approval, DNV GL approval, ABS approval, BV approval, CCS approval

PED、CRN、AD 2000

3.1材料證書
NACE MR0175/MR0103，PMI，焊接測試遵循EN ISO、ASME、NORSOK標準

cGMP

科里奧利質量流量

Flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os.
Highest measurement performance for liquids and gases under varying, demanding process conditions.

Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – mriable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").

Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

DN 8 to 250 (? to 10")

Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)

Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.25 %
Density (liquid): ±0.0005 g/cm3

0 to 2 200 000 kg/h (0 to 80 840 lb/min)

PN 100, Class 600, 63K

Standard: –50 to +150 °C (–58…+302 °F)
Option: –50 to +240 °C (–58…+464 °F)
High temperatur option: –50 to +350 °C (–58…+662 °F)
Option: –196 to +150 °C (–320 to +302 °F)

Standard: –40 to +60 °C (–40 to +140 °F)
Option: –60 to +60 °C (–76 to +140 °F)

Standard: 1.4301 (304), corrosion resistant
Option: 1.4404 (316L)
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L

AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat

Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69.
Transmitter remote version: IP66/67, Type 4X enclosure

4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible

4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output

Status input
4-20 mA input

HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA

DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC

CE, C-tick, EAC marking

Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TüV SüD attestation)
MI-005 (Liquids other than water, Hydrocarbons, LPG, cryogenic liquids)
NTEP (Liquids other than water, LPG, cryogenic liquids)
MC (Liquids other than water, cryogenic liquids)
MI-002, PTB

LR approval, DNV GL approval, ABS approval, BV approval, CCS approval

PED, CRN, AD 2000

3.1 material
NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK

3-A, EHEDG, cGMP