Domestic garbage automatic compressor
Performance characteristics and specifications of automatic compressors for domestic garbage;
01. Output: 3-6 (waste paper) tons/hour 1.5-3 (plastic) tons/hour
02. Packing size: L1600 *W1100mm*H1830mm
03. Weight of finished product: 500～1000kg, calculated according to the package of W1100mm*H830mm*L1500mm (density: 400-600kg/m3)
04. Feed box volume: L1600*W1000mm
05. Working mode: automatic binding of hydraulic threading, iron wire use range (2.8-3.5mm).
06. Forming cutter: double-shear type (which can reduce the pressure on the side panel) replaceable blade with tooth shape to reduce the cutting resistance.
07. Oil tank volume: 2000 litres (about 10 barrels of hydraulic oil).
08. Strapping method: Number of strapping lines: 4.
09. Shearing blade: replaceable segmented tooth-shaped blade; cutting method: breakthrough type.
10. Bottom structure: roller track; interchangeable 12mm wear-resistant high-quality steel + 16mm bottom plate; reinforced main body and bottom plate.
11. Tightly packed hydraulic cylinder: D120*d80*L930mm 2/set
12. Main hydraulic cylinder: D250*d190*L2880mm 1/set
13. Body weight: about 15 tons.
14. 150T semi-automatic plastic paper packing machine footprint: L8800mm*W2000mm*H2500mm
Domestic garbage automatic compressor D, oil pressure and power system-: (refrigerated circulation system)
01. Motor: Siemens joint venture motor (Wannan Motor)
02. Oil pump: original imported high-performance high-pressure double pump
03. Refrigeration system: The water tower refrigeration system keeps the equipment working normally below 60° for a long time.
04. Pressure throat: Original imported Italian (or German) advanced hydraulic throat.
05. Oil seal accessories: imported Japanese famous brａnd NOK products.
06. Hydraulic oil: 68# high anti-wear hydraulic oil can be used normally at minus 30°C.
07. Improvement of oil circuit: smooth oil circuit design and improve mechanical working efficiency.
08. Fittings improvement: the use of the most advanced international hydraulic system with high-efficiency flow hydraulic accessories; to ensure quality and durability.
Domestic garbage automatic compressor E, electrical appliances-fully automatic micro-control system:
01. Power supply requirements: 380V/415V, X 37KW; three-phase 50HZ/60HZ.
02. PLC programmable controller----Mitsubishi products from Japan or Siemens products from Germany.
03. Control electrical products----Imported protective devices, products from Fuji and Mitsubishi in Japan; Korea
Famous brａnd alarm lights and other original imported electrical accessories.
04. 150T automatic hydraulic baler adopts LCD mechanical operation touch screen (man-machine screen) display program; displays digital parameters such as baling length and number, etc.
Prompt fault maintenance information, convenient for operators to operate.
05. Equipped with LED display of packing length, which is convenient for accurate control of packing length; simple operation and clear record.
06. Equipped with thermal cutoffs to protect the motor system from short circuit and burnout.
07. The fault of the machine and equipment is displayed on the touch screen control system, which is convenient to find the cause of the fault.
Note: The product is continuously improved, the actual product and the drawing are slightly different, and the actual product shall prevail, without notice.
Operation of automatic compressor for domestic garbage: 1. String the packing string through the automatic elastic tightening device behind the vertical waste paper packing machine, and place it along the packing belt slot, and then tie the packing belt to the bottom end of the packing trough and rotate it. Automatic tightening device 90 degrees, close the bottom door to lock.
2. Input the material. When the material is loaded to the height of the platen, close the door tightly and press the "down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door).
Operation 3. The pressure plate moves downward and compresses to reach the maximum pressure, and then automatically returns to the fully open position. When compressing and packing constraints, the pressure plate stops at the preset position of the compressed material.
Operation 4. Open the door of the device, pass the tie rope from the front to the back, pass through the bottom wire slot and return to the front through the pressure plate wire slot, and tie the tie rope tightly by hand. Push the packing lever by hand, push the lever to a fixed position, and tighten it. Press the "Up" button, the return stroke of the cylinder will automatically turn over the bundled bundle. (No one is allowed to stａnd in front of the door when opening the next door to avoid accidental injury when the door pops open)
5. After the bale is ejected, reset the baling rod to perform the pressing action. Finally, the bale is removed, the door is closed and locked to enter the next bale cycle task.
發送反饋
歷史記錄
大田公司是注塑成型周邊機械*生產廠家。隨著人們對塑膠產品的要求越來越高，注塑工藝日益*。因此，公司不僅注重產品品質，更致力于研究開發高效、節能、環保之優質產品、以感謝廣大新老客戶的支持與厚愛?！ {借十多年的技術革新優勢和工程技術人員的不斷探索，為產品的更新?lián)Q代，精益求精，奠定了堅實的基礎。在所有產品的設計和制造上都體現了客戶的寶貴意見及市場的適用性，力求盡善盡美；在主要部件方面，全部采用日本、美國、法國等進口壓縮機組；意大利、中國臺灣、韓國、日本等電機、電器、泵浦，從而確保產品的性能和品質，使公司順利獲得了德國來茵公司ISO-9002品質認證，產品廣泛用于塑膠、電子、電鍍、化學、五金、食品等行業。選用大田機械必將給您帶來更大的效益回報。 展望未來，我們充滿信心，憑自身完善的售后服務及性能*的產品，我們希望能與各行業攜手共進，共創美好的明天。
吸料機;上料機;抽料機;送料機;模溫機;冷水機;干燥機;碎料機;冷水塔;液壓打包機;攪拌機;脫水機;干衣機;洗衣機
Domestic garbage automatic compressor 產品信息
