1、節省人工成本和原料成本，使用年限長達10年以上；
2、原料集中管理，避免浪費及污染現象；
3、保持工廠環境整潔，維系環境體系；
4、有利保持品質穩定，提高產值，維系質量體系；
5、有利於提高公司形象，贏得客戶好評與合作。
Plastic central feeding system features
1, save labor costs and raw material costs, the use of life for more than 10 years;
2, centralized management of raw materials to avoid waste and pollution;
3, to keep the factory environment clean and maintain the environment system;
4, favorable to maintain quality and stability, increase production value, maintain the quality system;
5, is conducive to improving the company's image, to win customers praise and cooperation.
塑料供料系統設計流程：原料→儲存→計量→干燥→輸送→使用
塑料供料系統采用一臺機一根管，密封式回路設計方式，保證整個系統運行穩定，塑膠回潮、堵料現象發生。配合干燥機（除濕機）系統使用，可使干燥空氣對原料進行再次干燥，防止干燥後的塑膠回潮，同時在每個輸送循環後對輸送管進行清理，確保管道內沒有殘料。在避免原料回潮的同時也保證加入注塑機中原料一致性，在真空負壓同進作用下，原料中原有的粉塵經過過濾器（集塵器）系統濾出，有利提高產品質量。
Plastic central feeding system design process: raw materials → storage → measurement → drying → transport → use
Plastic central feeding system using a machine a tube, sealed circuit design, to ensure the stability of the entire system, no plastic resurgence, blocking material phenomenon occurs. With the central dryer (dehumidifier) system, dry air can be used to dry the raw materials again, to prevent the plastic moisture after drying, while in each conveying cycle after the pipeline to clean up to ensure that there is no residue in the pipeline. In order to avoid the return of raw materials, but also to ensure that the injection molding machine to join the consistency of raw materials in the vacuum negative pressure with the role of the original raw materials through the filter (dust collector) system filter out, favorable to improve product quality.
塑料供料系統控制臺特點：
增設原料管制畫面，監控各成型機所使用原料、吸料、缺料及主機（馬達）各種異常現象。
Plastic central feeding system console features:
The addition of raw material control screen, the monitoring of the use of raw materials, suction, lack of material and the central host (motor) a variety of anomalies.
采色書面顯示各種設定，運轉及運轉狀況；
具備料管抽空清管，自動洗塵集塵供料主機A、B交替自動切換及人工選料防錯功能；
采用Color display in a variety of settings, operation and operation of the situation;
With a tube to clear the tube, automatic dust collection center for the host A, B alternating automatic switching and artificial selection of material error-proof function;
Using PLC and large size 10.4-inch color man-machine interface touch panel, easy to understand, good operation;
PLC及大尺寸10.4寸彩色人機界面觸控面板，簡單易懂，好操作；
塑料供料系統特點主機特點
1、馬達不停止設計，以避免馬達啟動頻繁，造成耗損；
2、附安全釋壓閥，當主機運動壓力過大時，安全設定值過載，釋壓閥全自動釋壓以保護馬達；
3、供料主機兩臺A、B交替，并且有自動切換閥門設計，確保原料輸送穩定性。
自動逆轉旋風集塵器
1、將空氣濾清器及旋風集塵器一體設計，以自然離心力高效能收集粉塵；
2、可附高壓儲氣罐，自動清洗過濾器；
3、集塵器裝截風閥，可有效在不停機下，移動集塵器粉塵。
Plastic central feeding system features host features
1, the motor does not stop the design, in order to avoid frequent motor start, resulting in wear and tear;
2, with safety relief valve, when the host movement pressure is too large, the safety set value overload, release valve fully release pressure to protect the motor;
3, for the host two A, B alternately, and there are automatic switching valve design to ensure that the stability of raw materials delivery.
Automatic reversal whirlpool dust collector
1, the air filter and cyclone dust collector design, natural centrifugal force to collect dust and high efficiency;
2, can be attached to high pressure gas tank, automatic cleaning filter;
3, dust collector installed wind pump, can be effective in the non-stop, the dust collector dust.
塑料供料系統送料站特點
、是由數個分支組合而成，而同一個分岐料管的原料，可供注塑機機臺使用，每支都有快速按頭保氣密性；可提高系統效率，換料方便快捷。
Characteristics of feeding center for plastic central feeding system
, Is a combination of several branches, and the same sub-ore pipe material, for injection molding machine machine use, each have a quick head tightness; can improve system efficiency, easy to change material.
整廠自動化設計，將原料及干燥料筒與現場分開管理，節省空間。
現場作業環境清潔美觀，沒有熱源，提升環境質量，降低人員流動率。
客戶參觀時有助提升企業整體形象，獲得良好印象，從而增加訂單。
The whole plant automation design, the raw materials and drying barrels and the scene completely separate management, saving space.
On-site operating environment clean and beautiful, no heat, improve environmental quality, reduce staff turnover rate.
Customers visit to help enhance the overall image of the enterprise, get a good impression, thereby increasing the order.
原料現場
原料集中除濕干燥，可節省用電量及烘料時間。
原料專人負責管理，減少浪費，降低生產成本。
設立原料快速選料站，提高生產效率。
可適用于多種原料之彈性生產模式。
產能及良品率提高且穩定。
Raw material scene
Raw material centralized dehumidification drying, can save electricity and drying time.
Raw materials responsible for management, reduce waste, reduce production costs.
The establishment of raw materials rapid selection of materials, improve production efficiency.
Can be applied to a variety of raw materials, flexible production model.
Production capacity and yield improved and stable.
