典型應用
BELSORP MAX X有著廣泛的應用,包括催化劑、電池、纖維、聚合物材料、藥品、顏料、化妝品、磁粉、分離膜、過濾器、調色劑、水泥、陶瓷和半導體材料。
技術參數
測量原理 | Constant volumetric method + AFSM™ |
吸附氣體 | N2, Ar, Kr, CO2, H2, O2, CH4, NH3, and other non-corrosive gases |
吸附蒸氣 | H2O、MeOH、EtOH、C6H6和其他非腐蝕性的蒸汽 |
氣體端口 | 3 ports (optional: up to 12 ports) |
測量次數 | Max. 4 ports simultaneously |
測量范圍(比表面積) | 0.01 m2/g及以上(N2) 0.0005 m2/g及以上(Kr) (取決于樣品密度) |
Measurement range (pore size distribution) | 0.35 - 500 nm (from 0.25 nm when CO2 is used) |
Measurement range (vapor adsorption isotherm) | p/p0 = ~0.95 @40°C |
壓力傳感器(133 kPa: 1000 Torr) | Max. 6 units |
壓力傳感器(1.33 kPa: 10 Torr) | Max. 4 units |
壓力傳感器(0.0133 kPa: 0.1 Torr) | Max. 3 units |
恒溫空氣爐 | 50°C |
Vacuum gauge / pump | 渦輪分子泵+旋轉泵 |
Measurement temperature (Dewar vessel) | LN2, LAr temperature; Holding time: 80 h |
Measurement temperature (Pretreatment heater) | 50 - 550°C |
Measurement temperature (Water bath) | -10 - 70°C (constant temperature circulator) |
設備尺寸(寬x高x深) | 360 x 870 x 590 mm |
重量(主體) | 50公斤 |
公用事業 - 燃氣 | He, adsorption gas: 0.1MPa Joint: 1/8" Swagelok joint Valve drive gas: 0.5 - 0.6 MPa 1/4" one-touch pipe contact |
實用工具--電源 | AC 100 - 240 V or less (rotary pump not included) |
通過CE認證 | 是 |
Operating software | Windows 10 operating system or higher, CPU Intel(R) Core i5 or higher 2 GB of memory or more, 5 GB HDD space or more |
Recommended Monitor | Full HD monitors |