THERMOCOAX
Heating elements

Resistance heating
is one of the first applications of electricity..

In the course of a
century, thousands of heating problems have been solved ranging from megawatts
down to a few watts, or less.

The fundamentals
are always the same, the requirements and solutions widely different.

Between a large
furnace constructed as an individual unit and a domestic heater produced in
large quantities, there exist a number of cases where no “ready-made” solution
is available.

For such cases,
THERMOCOAX often presents a suitable answer to: Heating from the
cryogenic temperatures up to

>1000°C. Heat dissipation either
very low or very high power (from few watts to several tens of kilowatts). For use in air, under
vacuum or high pressure and in any corrosive environment compatible with the
sheath material. In applications requiring
high reliability components.

Easy fitting

Electrical
screening THERMOCOAX heaters can be
attached directly to metal parts

Tight bending
radius Only 3 times the outer
diameter

Small dimensions The heat can be generated
exactly where it is required thus power losses are reduced as well as power
consumption

Excellent heat
exchange The heater can be brazed
onto any metal piece