| Inspector EXP是小型的手持式微處理器控制的高靈敏度射線檢測儀,能檢測αβγ和Χ射線。直接讀出射線水平。另外，有可調整的定時器和外部校準鍵。該劑量儀采用一支蓋革-彌勒計數管來測定αβγ及Χ射線輻射，數字顯示。 
儀器介紹
1、采用一只蓋革-彌勒計數管來測定α、β、γ和X射線輻射
2、“安全”（Safety First）的校準功能能夠避免校準人員的輻射接觸
3、檢測儀符合歐洲CE認證要求
主要特點
1、內置鹵素淬滅劑GM探測器，對α、β射線源的靈敏度很高
2、四位液晶顯示，可選擇mR/hr、CPM、mSv/hr、CPS或Total/Timer等單位
3、總計數/定時器功能對輕微污染進行定時的精確檢測，定時時間可選擇1分鐘-- 24小時
技術參數
1、測量范圍：mR/hr(毫倫/小時)：0.001—110.0，CPM（每分鐘計數）：0—300,000
μSv/hr(微希伏/小時)：0.01—1,100，CPS（每秒鐘計數）：0—5,000，總計數：
1—9,999,000
2、效 率：Sr-90(546kev,2.3MeV βmax)約75% C-14(156kev βmax)約11%
Bi-210(1.2MeV βmax)約64% Am-241(5.5MeV α)約36%
3、靈 敏 度：3500CPM/ mR/hr（對于Cs-137）
4、精 度：±15%
5、溫度范圍：-10℃---+50℃
6、電 源：1節9V堿性電池，電池壽命 200小時
7、尺寸重量：150×80×30mm 350克（含電池）
應用領域
●探測和測定表面沾污
●在操作放射性核素時監測可能存在的放射性暴露量
●調查環境污染
●測定惰性氣體及其它低能放射性核素
●建筑裝飾材料放射測定
射線危害：低劑量的放射性射線輻射（天然背景
輻射的變化范圍），對人體無害或風險甚低，
但達到一定劑量則會對人體有害，可引起癌癥、
白內障、不孕癥、突變、效應、壽命減短,
甚至死亡
應用：偵測放射性射線，以采取相應防護措施。
海關和邊境，政府部門，檢疫檢驗，應急事故處理，
核電廠、銀行、政府、實驗室等部門安全巡查，
醫學廢料處理，消防隊，采礦業，科學實驗，
個人保護，連續監測,出入境檢驗檢疫,疾控中心,醫院,礦山礦井
參考信息（來自中國輻射防護研究院） 居民的劑量限值為每年1mSv。即0.114μSv/hr。 放射性職業人員劑量限值為每年20mSv，但任何一年不能超過50mSv。 
The Inspector EXP
External Probe Surface Contamination Monitor The Inspector EXP is designed to meet the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector, but instead of the built-in detector, it has the added versatility of an external probe. The carrying case has a clear window panel that provides a full view of the readout and count light and access to the switches. It includes convenient hａnd straps and a belt loop for carrying the instrument and a small pocket for a check source. The probe can be attached to the carrying case for one-handed operation if desired. The protective probe cover folds easily out of the way during one-handed operation. Specifications: Same as Inspector (below) except for external probe: RAP-RS1 Probe: Detector: Same as Inspector Alert (below)
Enclosure: Anodized aluminum housing with coated, black foam grip
Power supply: 500-volt, in the probe head
Size: Approx. length: 22.2 cm (8.75 in.) Diameter: 7 cm (2.75 in.)
Connector: Amphenol tuchel connectors
Inspector specifications: Detector:
Halogen-quenched Geiger-Mueller tube.
Effective diameter 1.75" (45 mm).
Mica window density 1.5-2.0 mg/cm2.
Display: 4-digit liquid crystal display with mode indicators
Operating Range:
mR/hr: .001 to 100.0
CPM: 0 to 300,000
mSv/hr: .01 to 1,000
CPS: 0 to 5,000
Total: 1 to 9,999,000 counts
Gamma Sensitivity:
3500 CPM/mR/hr referenced to Cs-137
Smallest detectable level for I-125 is .02 mCi at contact
Efficiency: For 4 pi geometry at contact
Beta
C-14 (49 keV avg. 156 keV max.): 5.3%
Bi-210 (390 keV avg. 1.2 MeV max.): 32%
Sr-90 (546 keV and 2.3 MeV): 38%
P-32 (693 keV avg. 1.7 MeV max.): 33%
Alpha
Am-241 (5.5 MeV): 18%
Averaging Periods:
Display updates every 3 seconds, showing the average for the past 30-second time period at normal levels. Averaging period decreases as radiation level increases. User can select fast 3-second averaging period.
Timer: Can set 1-10 minute sampling periods in one-minute increments, 10-50 minute sampling periods in 10-minute increments, and 1-24 hour sampling periods in 1-hour increments
Alert:
Beeper sounds the alert
User-adjustable alert level is set using three buttons
Accuracy: ± 15% up to 50 mR/hr; ± 20% up to 100 mR/hr
Anti-Saturation: Readout holds at full scale in fields up to 100 times the maximum reading
Temperature Range: -20o to +50o C, -4o to 122o F
Power: One 9-volt alkaline battery; battery life is average 2160 hours at normal background, average 625 hours at 1 mR/hr with beeper off
Size: 150 x 80 x 30 mm (5.9" x 3.2" x 1.2")
Weight: 350 grams (11.4 oz) including battery
I/O Ports: Stereo 3.5 mm jack for CMOS or TTL devices – sends counts to computer or data logger. Mono 2.5 mm jack provides electronic calibration input.
Count Light: Red LED flashes with each radiation event
Audio: Beeper beeps with each radiation event; can be muted | 
