一、地坪現場硬度驗收試驗裝置產品簡介
適用于水泥基耐磨地坪系統、滲透型液體硬化地坪系統、水泥基自流平地坪系統、樹脂整體面層地坪系統和普通混凝土地坪系統的硬度測量。該產品原理是對一定直徑的鋼球施加一定的試驗載荷壓入待測地坪表面，經規定的保持時間后，卸除試驗載荷，測量待測地坪表面壓痕直徑。本產品具有外觀新穎，操作簡單，試驗結果準確等特點。
1. Product introduction
It is suitable for the hardness measurement of cement-based wear-resistant floor systems, penetrating liquid hardening floor systems, cement-based self-leveling floor systems, resin monolithic surface floor systems and ordinary concrete floor systems. The principle of this product is to apply a certain test load to a steel ball of a certain diameter and press it into the surface of the floor to be tested. After a specified holding time, the test load is removed and the diameter of the indentation on the surface of the floor to be tested is measured. This product has the characteristics of novel appearance, simple operation and accurate test results.
二、地坪現場硬度驗收試驗裝置技術參數：
1、鋼球直徑： 10±0.01mm
2、荷載重量： 10±0.1N
3、配重砝碼： 500±5N
4、千分表精度： 0.001mm
5、千分表量程： 0-12.7mm
6、外形尺寸： 520X520X650mm
7、整機重量：120kg
2. Technical parameters:
1. Steel ball diameter: 10±0.01mm
2. Load weight: 10±0.1N
3. Counterweight: 500±5N
4. The accuracy of the dial indicator: 0.001mm
5. The range of the dial indicator: 0-12.7mm
6. Dimensions: 520X520X650mm
7. The weight of the whole machine: 120kg
