培養箱震蕩培養箱 (桌上型)
數顯(制冷)震蕩培養箱。透明蓋子方便觀察內部的樣品,氣壓式彈簧設計方便操作人員放入樣品后立馬蓋上蓋子。
型號 IST-3075/3075R IST-4075/4075R
特點
操作特點
General Control
通用控制
· Intuitive touch screen LCD controllerwith easy icons and logical menus.
· 觸摸屏式LCD控制器,圖標和菜單欄簡單易懂。
· Automatic run is available withnon-volatile set point memory after power interruption.
· 突然斷電后有記憶功能,復電后自動運行。
· Built-in RS-232 port and USB port forexternal control and data collection.
· 內置RS-232和USB接口,方便外聯使用和數據的收集。
Shaking Control
震蕩控制
· Speed range: 10 to 500 rpm.
· 速度范圍:10到500rpm
· Orbit diameter: 19mm.
· 圓周式軌道運動直徑:19mm
· Timer range: 1 min. to 999 hr 59 min.
· 定時范圍:1分鐘到999小時59小時
· Audible/Visible alarm activated byshaking speed deviation.
· 轉速有偏差會聲光報警。
· Worry-free operation.
· 智能運行。
- Automatic shaking speed adjustment in case of excessive workload such asunbalanced load placement, unusual vibrations caused from unstable floor orexternal shock.
· - 當系統負載運行的時候會自動調節轉速(由于桌面不平引起負載不平衡和不正常的震蕩)。
· Shaker protection system againstover-current, stalled platform check.
· 震動自我保護功能防止過載電流,檢查平臺時會自動停機。
Temperature Control
溫度控制
· Temperature range:
Amb.+5°C to 80 °C (for IST-3075 / 4075)
Amb.-15°C (Min. +15) to 80°C (for IST-3075R / 4075R)
· 溫度范圍:
· 室溫+5°C 到 80 °C (適用 IST-3075 / 4075)
· 室溫-15°C (15°C) 到 80°C (適用 IST-3075R / 4075R)
· Microprocessor PID control andauto-tuning.
· 微處理PID控制和自動調節功能。
· Three point temperature calibration.
· 三點溫度校準功能。
· Mechanical over-temperature protectiondevice.
· 機械過溫保護裝置。
Constructional Features
結構特點
· Wide speed range even with heavyworkload.
· 過載重量重的情況下也有速度范圍廣的特點。
- Equipped with a maintenance-free BLDC motor to generate smooth, quiet,uniform,
and yet powerful shaking motion.
· - 直流無刷電機確保轉速的平穩、安靜、均勻并且強勁有力。
· Repetitive task can be easily performedas the platform stops where it starts.
· 平臺無論在運行前還是在停止后的位置始終如一。
- Stopping the shaking platform always at the same position is highlybeneficial for automated dosing
or sampling process.
· - 運行停止后平臺的位置保持在一個位置,方便配料或者樣品的其它處理。
· Pleasant test environment by the smoothacceleration and deceleration control.
· 平穩的加速和減速控制提供理想的測試環境。
- Smooth start and smooth stop function prevents chemical spills from flasks ortest tubes.
· - 平穩的啟動和停機功能,能夠防止化學藥品從燒瓶或者試管中溢出。
· Wide sample monitoring and convenientsample loading.
· 監控樣品的視角廣,也方便樣品的安放。
- Convenient sample monitoring without affecting inside environment thanks
to the three side transparent acryl lid with bright LED lamps.
· - 內部裝有LED燈和三面透明的亞克力蓋子方便樣品的觀察,也不影響內部的環境。
- Gas spring lid supports providing smooth motion, soft opening and closing.
· - 氣壓式彈簧蓋支撐,使得蓋子能夠平穩安全的打開和關閉。
· Air-tight silicone door seal to provideexcellent temperature uniformity.
· 密封的硅膠門可以保持內部溫度的均勻。
· Corrosion resistance stainless steelinterior.
· 不銹鋼的內部可以防腐蝕。
· Three step adjustable high-velocity fanensuring uniform temperature distribution and rapid thermal recovery after dooropen.
· 3檔調節速度的風扇,能夠確保在打開門之后溫度分布均勻和快速恢復溫度。
· Environment-friendly CFC-freerefrigerant. (for IST-3075R / 4075R)
· 不含氟利昂的制冷劑。(適用IST-3075R /4075R)
· RS-232 interface.
· RS-232接口。
Specifications
技術參數
Model 型號 | IST-3075 | IST-3075R | IST-4075 | IST-4075R | |||||
Temperature 溫度 | Range (℃ / ℉) 溫度范圍(℃ / ℉) | Amb. +5 to 80 室溫. +5 to 80 | Amb. -15 室溫. -15 | Amb. +5 to 80 室溫. +5 to 80 | Amb. -15 室溫. -15 | ||||
Fluctuation 1) at 37℃ 在37℃時,溫度波動 (±℃ / ℉) | 0.1 / 0.18 | ||||||||
Variation 1) at 37℃ 在37℃時,溫度變化 (±℃ / ℉) | 0.5 / 0.90 | ||||||||
Refrigerator (Hp) 制冷量(Hp) | - | 1 / 8 HBP (220V, 230V) | - | 1 / 8 HBP | |||||
1 / 6 HBP (100V, 120V) | 1 / 6 HBP | ||||||||
Shaking System 振動 | Motion Type 振動模式 | Orbital 圓周軌道式震動 | |||||||
Amplitude Size 振動幅度(mm / inch, 直徑.) | 19.1 / 0.75 | ||||||||
Speed Range (RPM) 轉速范圍(RPM) | 10 to 500 | ||||||||
Accuracy 振動精度 | ±1% of set speed (>100rpm) / ±1 (<100rpm) ±1% (速度>100rpm時) / ±1 (速度<100rpm時) | ||||||||
Timer 定時范圍 | 1 min. to 999 hr 59 min. 1分鐘到999小時59分鐘 | ||||||||
Max. Load 承載<100rpm | 10 / 22.0 at 500 rpm 10 / 22.0 (轉速在500 rpm時) 18 / 39.7(轉速在400 rpm時) | 10 / 22.0 at 500 rpm 10 / 22.0 (轉速在500 rpm時) | |||||||
Dimension 尺寸 | Volume (L / cu ft) 內部容積(L / cu ft) | 53 / 1.9 | 83 / 2.9 | ||||||
Platform (W×D) 平臺尺寸(W×D) | 350×350 / 13.8×13.8 | 450×450 / 17.7×17.7 | |||||||
Internal (W×D×H) 內部尺寸(W×D×H) | 410×410×320 / 16.1×16.1×12.6 | 510×510×320 / 20.1×20.1×12.6 | |||||||
Overall (W×D×H) 外部尺寸(W×D×H) | 440×785×510 / 17.3×30.9×20.1 | 540×890×610 / 21.3×35×20.1 | |||||||
Net Weight 凈重(Kg / lbs) | 65 / 143.3 | 73 / 160.9 | 81 / 178.6 | 90 / 198.4 | |||||
Electrical Requirements (230V) 電源要求(230V) | 60Hz, | 50Hz, | 60Hz, | 50Hz, | 60Hz, | 50Hz, | 60Hz, | 50Hz, | |
Cat. No. 貨號 | AAH | AAH | AAH | AAH | AAH | AAH | AAH | AAH | |
Electrical Requirements (120V) 電源要求(120V) | 50/60Hz, 7.5A | 60Hz, 10.1A | 50/60Hz, 7.5A | 60Hz, 10.1A | |||||
Cat. No. 貨號 | AAH23465U | AAH23565U | AAH23665U | AAH23765U |
1) Technical data according to DIN 12880.
2) 技術參數符合DIN 12880要求
※ Permissible environmental conditions: temperature(15-40°C).
※環境溫度:15-40°C
※ Above specifications can be changed without prior notice.
※由于產品不斷跟新,參數如若未跟新請恕諒解。