產品介紹：

氣體分布狀態的控制，粉末物料的傳輸和流態化操作，在工業過程中有著非常廣泛的應用。流態化床技術是化工過程中進行傳質、傳熱與化學反應的重要手段。其中氣體分布狀態的控制需要透氣性良好的燒結網板。作為控制氣體分布的燒結金屬網板具有以下優異

特性：

1.孔隙分布均勻，流量、阻力的控制特性穩定。

2.強度高、剛性大、組合安裝與維護方便。

3.傳質、傳熱與溶態化效果好，效率高、耗氣量低。

4.耐高溫、抗腐蝕、適用環境范圍寬。

5.操作彈性大、工藝調節方便、物料不易泄漏、能夠消除擊穿短路和堵塞等故障，使用壽命長；燒結金屬網板廣泛應用于氧化鋁和煉鐵高爐煤粉的噴吹。

供貨尺寸≤1000×1000mm

厚度：2~12mm

Product introduction:

Gas distribution state control, powder material transmission and fluidized operation has a very wide range of applications in the industrial process.  

Fluidized bed technology is important means of mass transfer, heat transfer and chemical reaction in the chemical process. And the gas distribution state control need sintered plate with good permeability, the advantages of which are as followed.

1. Uniform distribution pore, stable flow rate and resistance control characteristic

2. High strength and rigidity, easy combination installation and maintenance

3. Good effect of mass transfer, heat transfer and dissolved fluidization. High efficiency and low gas consumption

4. High temperature resistant, corrosion resistance and a wide range of operating environment

5. Flexible operation, easy process adjustment, material not easy to leak, can eliminate the fault such as breakdown short circuit and blockage, long service life.

Application: Sintered metal plate is widely used in alumina and puddling blast furnace coal injection.

Supplying size: ≤1000*1000mm  

Thickness: 2~12mm