產品型號：JSH3503

產品名稱：自動深色石油產品硫含量測定器(管式爐法)JSH3503

產品說明：

JSH3503自動深色石油產品硫含量測定器（管式爐法）

一、符合GB/T387標準

二、主要技術參數

控制方式：單片機自動程序控制

控溫方式：單片機＋數顯溫控儀自動控溫

控速方式：單片機自動控制

計時方式：單片機程序自動計時

控制溫度：900～950℃

加熱功率：1.5kw×2支

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、采用單片機自動程序控制和自動計時，動作過程靈活可靠。溫度及時間均可通過單片機控制面板進行修改和設定。

2、爐溫采用進口數顯溫控儀自動控溫，熱電偶測溫，控溫精度高。

3、儀器管式爐移動速度，即燃燒、焙燒時間均由單片機自動程序控制和自動計時；燃燒時間可在30－40分鐘和50－60分鐘兩組參數進行選擇。

4、采用雙管分別控溫，加熱互不影響，爐絲不易損壞；

5、采用功率大、體積小、噪音低的空氣壓縮機，流量穩定。

JSH3503 Automatic Determination of sulfur content in Dark Petroleum Products (tubular furnace method)

I. Comply with GB/T387 standard

Ii. Main technical parameters

Control mode: SCM automatic program control

Temperature control mode: SCM + digital temperature controller automatic temperature control

Speed control mode: SCM automatic control

Timing: SCM program automatic timing

Control temperature: 900 ~ 950℃

Heating power: 1.5KW ×2 PCS

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1, the use of single-chip automatic program control and automatic timing, the action process is flexible and reliable. Temperature and time can be modified and set by SCM control panel.

2, furnace temperature adopts imported digital display temperature controller automatic temperature control, thermocouple temperature measurement, temperature control precision is high.

3. The moving speed of the tube furnace, that is, the burning and roasting time, is automatically controlled by the single chip microcomputer with automatic program and timing. The burning time can be selected between 30-40 minutes and 50-60 minutes.

4. Adopt two pipes to control the temperature respectively. Heating does not affect each other, and the furnace wire is not easy to be damaged.

5, the use of large power, small volume, low noise air compressor, flow stability.